Overview
- Covers particle materials of topical import in many industries
- Links specific particle characteristics to the critical performance factors relevant to industrial applications
- Edited by experts acknowledged in both academia and industry
Part of the book series: Particle Technology Series (POTS, volume 19)
Buy print copy
About this book
Particulate products make up around 80% of chemical products, from all industry sectors. Examples given in this book include the construction materials, fine ceramics and concrete; the delicacies, chocolate and ice cream; pharmaceutical, powders, medical inhalers and sun screen; liquid and powder paints. Size distribution and the shape of the particles provide for different functionalities in these products. Some functions are general, others specific. General functions are powder flow and require – at the typical particulate concentrations of these products – that the particles cause adequate rheological behavior during processing and/or for product performance. Therefore, this book addresses particle packing as well as its relation to powder flow and rheological behavior. Moreover, general relationships to particle size are discussed for e.g. color and sensorial aspects of particulate products. Product-specific functionalities are often relevant for comparable product groups. Particle size distribution and shape provide, for example, the following functionalities:
- dense particle packing in relation to sufficient strength is required in concrete construction, ceramic objects and pharmaceutical tablets
- good sensorial properties (mouthfeel) to chocolate and ice cream
- effective dissolution, flow and compression properties for pharmaceutical powders
- adequate hiding power and effective coloring of paints for protection and the desired esthetical appeal of the objects
- adequate protection of our body against sun light by sunscreen
- effective particle transport and deposition to desired locations for medical inhalers and powder paints.
Adequate particle size distribution, shape and porosity of particulate products have to be achieved in order to reach optimum product performance. This requires adequate management of design and development as well as sufficient knowledge of the underlying principles of physics and chemistry. Moreover, flammability, explosivity and other health hazards from powders, during handling, are taken into account. This is necessary, since great risks may be involved. In all aspects, the most relevant parameters of the size distribution (and particle shape) have to be selected.
In this book, experts in the different product fields have contributed to the product chapters. This provides optimum information on what particulate aspects are most relevant for behavior and performance within specified industrial products and how optimum results can be obtained. It differs from other books in the way that the critical aspects of different products are reported, so that similarities and differences can be identified. We trust that this approach will lead to improved optimization in design, development and quality of many particulate products.
Similar content being viewed by others
Keywords
- BET Method
- Dynamic Light Scattering
- Effective Particle Density
- Green Body
- Industrial Particle R&D
- Laser Diffraction
- Mercury Porosimetry
- Microscopy and Image Analysis
- Paint Technology
- Particle Size Distribution PSD
- Particle Size and Analysis
- Particulate Materials
- Process Control
- Product Development and Design
- Product Specifications
- Quality Function Deployment QFD
- Rheology of Particle Suspentions
- Silicon Nitride and Alumina Ceramics
- Specific Surface Area
- Static Light Scattering
Table of contents (15 chapters)
Editors and Affiliations
About the editors
Dr Merkus is the author of the Springer book “Particle Size Measurements” (2009).
Dr Ir Gabriel M.H. Meesters is affiliated to DSM Food Specialities and Delft University of Technology Delft. He has 10 patents filed and 5 issued, and will be one of the organizers of the technical program of PARTEC 2013 in Nuremberg, Germany.
Bibliographic Information
Book Title: Particulate Products
Book Subtitle: Tailoring Properties for Optimal Performance
Editors: Henk G. Merkus, Gabriel M.H. Meesters
Series Title: Particle Technology Series
DOI: https://doi.org/10.1007/978-3-319-00714-4
Publisher: Springer Cham
eBook Packages: Chemistry and Materials Science, Chemistry and Material Science (R0)
Copyright Information: Springer International Publishing Switzerland 2014
Hardcover ISBN: 978-3-319-00713-7Published: 02 December 2013
Softcover ISBN: 978-3-319-34341-9Published: 23 August 2016
eBook ISBN: 978-3-319-00714-4Published: 19 November 2013
Series ISSN: 1567-827X
Edition Number: 1
Number of Pages: XVIII, 469
Number of Illustrations: 79 b/w illustrations, 72 illustrations in colour
Topics: Soft and Granular Matter, Complex Fluids and Microfluidics, Characterization and Evaluation of Materials, Nanoscale Science and Technology, Quality Control, Reliability, Safety and Risk