Abstract
Chitosanases can catalyze the release of chitooligosaccharides which have a number of medical applications. Therefore, Chitosanases are good candidates for large-scale enzymatic synthesis due to their favorable thermostability properties and high catalytic efficiency. To further improve the thermostability of a chitosanase from Bacillus sp. TS, which has a half-life of 5.32 min, we mutated specific serine residues that we identified as potentially relevant through structure comparison with thermophilic CelA from Clostridium thermocellum. Out of a total of 15 mutants, three, namely S265G, S276A, and S347G, show higher thermostability. Their half-lives at 60 °C were calculated as 34.57 min, 36.79 min and 7.2 min. The Km values of S265G, S276A and S347G mutants show substrate binding ability comparable to that of the wild-type enzyme, while the S265G mutant displays a significant decrease of enzymatic activities. Additionally, we studied the synergistic effects of combined mutations, observing that all double mutants and the triple mutant are more stable than the wild-type enzyme and single mutants. Finally, we investigated the mechanisms which might give a reasonable explanation for the improved thermostability via comparative analysis of the resulting 3D structures.
Similar content being viewed by others
Introduction
Chitosanase (EC 3.2.1.132) is a kind of enzyme that can degrade chitosan and produce chitooligosaccharides1, which are mainly composed of D-glucosamine and occasionally incorporation of N-acetylglucosamine. The chitooligosaccharides exhibit a wide range of interesting biological activities. A number of potential applications of chitooligosaccharides have been suggested in medical contexts, including their use as inhibitors of tumor growth and metastasis, anti-inflammation therapeutics against asthma, facilitators of bone-tissue formation, wound healing accelerators and antibacterial, antifungal, and anti-malaria agents2,3,4.
Degradation of chitosan requires cleavage of its β-1,4-glycosidic link between monomers. The thermostability of chitosanases is key to their industrial applicability; a thermostable chitosanase is beneficial for the bioconversion of chitosan because of the improved reaction rate, reduced substrate viscosity and the minimized risk of microbial contamination. In addition, it allows enzyme feeding to be decreased, which can cut down the costs and increases the flexibility of manufacture process during industrial scale-up.
Previously, we cloned and over-expressed a chitosanase gene of Bacillus sp. TS in E. coli and the enzymatic properties were also characterized5. This recombinant CsnTS belonged to the GH-8 family and displayed a maximal activity at 60 °C and pH 5.0 with (GlcN)3–6 as its main hydrolytic product5. In principle, these properties would make CsnTS a suitable candidate for industrial applications. However, CsnTS becomes unstable at temperatures above 60 °C. Therefore, improving the thermostability of CsnTS is essential to make this system useful for industrial products, such as large-scale production of chitooligosaccharides.
Increasing the thermostability of proteins generally requires mutations to the peptide chain of amino acid residuals composing the protein6. Direct evolution followed by candidates screening has been commonly used to improve an enzyme’s thermostability and catalytic properties7,8. Other than these methods, structure-based rational design has emerged as yet another useful method9,10,11,12,13. For instance, comparison of an enzyme’s amino acid sequence or structure with that of thermostable and highly homologous counterparts has given important clues and led to several novel thermostable enzymes14,15,16,17,18. The thermostability of proteins was controlled by various factors19,20, including electrostatic interactions, amino acid charges, aromatic interactions, and compactness. Moreover, statistical analyses have shown that serine residues appear in thermophilic proteins only with low frequency and that glycine and alanine are beneficial for protein stability21,22.
Accordingly, in this study, we employ structure and sequence comparison of CsnTS with the thermophilic homologous protein (CelA) from Clostridium thermocellum23, and introduce mutations of serine residues24 to improve the thermostability of CsnTS. A total of 15 variants with single-site mutation were screened, from which mutants S265G, S276A and S347G exhibited a higher thermostability than the wild-type CsnTS. We examine the biochemical properties of these mutants and elucidate potential reasons for their improved thermostability. Furthermore, we show that combinations of selected single-site mutations lead to double mutants and a triple mutant that are even more stable than the single-site mutants. Our intramolecular interaction analysis shows that the number of interactions among residues decreases in the triple mutant S265G/S276A/S347G compared to the wild-type CsnTS. Our results do not only provide thermostable chitosanases for industrial applications but also demonstrate a useful approach for rational protein engineering.
Materials and methods
General
The chitosanase gene of Bacillus sp. TS (GenBank AC No.: KU363821) was obtained from the plasmid produced in our previous study5,25. The Escherichia coli Trans10 and BL21 (DE3) strains were commercial products of TransGen Biotech (Beijing, China) and the strains were cultured in LB medium at 37 °C with kanamycine (50 μg/mL). Chitosan (degree of deacetylation > 90%) was also commercial products (Weihai Disha Marine Biological Products Co., LTD).
Computer-aided modeling of CsnTS and the mutants
The theoretical structure of CsnTS and its mutants were constructed using Swiss-Model (http://swissmodel.expasy.org/), an online protein structure homology modeling server based on the reported structure of the chitosanase Chok (1V5C) of Bacillus sp. K17 as template26. CsnTS displayed highly homologous sequence (98% identity) as that of Chok. The final models herein displayed an excellent geometry without any disallowed residuals. Structure alignment was performed with the software BIOVIA DS (Accelrys, USA). Intramolecular interactions in both wild-type and mutant proteins were also calculated with DS software.
Site-directed mutagenesis
The previously reported CsnTS gene was cloned into pET29a (+) vector between the unique restriction sites NdeI and XhoI to make the expression plasmid. We used this plasmid as template in site-directed mutagenesis PCR. PCR-amplification was performed to get the mutagenesis with the Fast Mutagenesis System kit from Transgen Biotech Co. LTD using primers that are listed in Table 1. The PCR products were digested by DMT enzyme for 1 h, then transformed into the competent E. coli supplied in the kit. For multiple site mutants, the constructed plasmids in the first PCR mutagenesis were used as templates. The correctness of all plasmids was confirmed via DNA sequencing. Finally, the sequence confirmed plasmids would be over-expressed in E. coli BL21 (DE3).
Enzymatic activity assay
Chitosanase activity was evaluated by the method described below. 1 g of chitosan was dissolved in reaction buffer (100 mM sodium acetate, pH 5.0) to make substrate solution. Chitosanase was added to the substrate solution to start the hydrolysis reaction. The hydrolysis of chitosan reaction was carried out at 50 °C for a quarter. The released reducing sugar was quantified by the dinitrosalicylic acid method5. In one minutes, the amount of chitosanase required to release 1 μmol reducing sugar was defined as 1 unit enzyme. D-glucosamine was used to make calibration curve. The reaction mixture without enzyme was measured in a control experiment.
Screening for mutants with increased thermostability
All plasmids to expression proteins mutants were transformed into expression host and spread on LB plates with 25 µg mL−1 of kanamycin. Fresh monocolonies were picked out and cultured in 50 mL of LB medium with according antibiotics at 37 °C with rotatory shaker. The induction was started by putting 0.1 mM IPTG at the culture OD600 of 0.5–0.8. The cultures were centrifuged at 3000g for 15 min. The cell pellets were suspended with HT buffer that contains 10 mM MgCl2 and 100 mM KCl dissolved in 50 mM HEPES–KOH (pH 7.6) and then disrupted by sonication. The crude enzyme solutions were obtained by centrifugation at 20,000g for 45 min at 4 °C. Crude enzyme solutions were then incubated at 55 °C for 30 min. 100 µL of each sample was used for enzymatic activity measurements.
Protein expression and purification
The protein expression was similar to the process described above but scale up the culture volume to 500 mL. Crude enzyme solutions were also obtained by sonification of E. coli pellets.
The over-expressed proteins were purified by NTA-Ni affinity chromatography resin using GE commercial His-Trap FF columns as reported previously5,25. The purified proteins were stored in a HT buffer at − 20 °C. The protein purity was determined to 98% by SDS-PAGE (12% gel), and the protein concentrations were evaluated using a Bradford protein assay kit.
Biochemical characteristics of the enzymes
The thermostabilities of purified wild-type CsnTS and its variants were determined by pre-incubating the proteins at 60 °C for various periods and then measuring the residual enzymatic activities under the standard assay conditions. The enzyme’s half-life (t1/2) was used to evaluate its thermostability.
To determine the optimal temperature, enzymatic activity was investigated at temperatures from 40 to 80 °C with 5 °C increments. For each protein, the maximal enzymatic activity under optimal temperature was defined to 100%, relative activity was the ratio of the enzymatic activity at an appointed temperature to the maximal activity.
The optimal pH was also investigated over a pH range of 3.5–7.5. pH 3.5–5.8 range was achieved using buffer with 100 mM sodium acetate and pH 6.0–7.5 range was achieved using 100 mM sodium phosphate buffer. All the reactions were performed at 50 °C. Like calculation in optimal temperature, the maximal activity at the optimal pH was defined to 100%, then relative activity was the ratio of the enzyme activity to the maximal activity at an indicated pH.
The reaction to obtain kinetic parameters of the wild-type CsnTS and its variants were carried out under standard enzymatic assay conditions. In the reactions, the concentration of enzyme was 0.5 U/mL enzymes, while chitosan concentrations ranged from 0.1 to 10 mg/mL. The experiment results were analyzed by fitting data sets to the enzyme kinetic equation of the Michaelis–Menten model using GraphPad Prism.
Thermal unfolding of the enzymes
The Tm values of proteins was determined using Differential Scanning Calorimetry (DSC) measurements with a Nano DSC scanning microcalorimeter (Model 5100, Calorimetry Science Corporation, Utah, USA). The concentration of each protein sample was 0.2 mg/mL in HT buffer. And increased the temperature from 40 to 80 °C at a heating rate of 1 °C per min, with pressure set to 3.0 atm. The data were analyzed using the self-contained software NanoAnalyze.
Results
Identification of mutants with increased thermostability
Clostridium thermocellum is a thermophilic bacterium. Its protein CelA possesses an optimal enzymatic temperature of 75 °C23,27. The structure alignment of CsnTS and CelA from Clostridium thermocellum was performed in order to determine potential target residues for subsequent engineering of mutations (Fig. 1). 15 serine residues were selected and mutated to alanine or glycine. The mutants were overexpressed in E. coli BL21 (DE3) strain. The harvested cells were crushed by ultra-sonication and lysates were used for activity measurement. The activities of the wild-type CsnTS and 15 mutations were evaluated with or without heat treatment. The retention of enzymatic activity was measured after incubating the samples for 30 min at 55 °C. The wild-type CsnTS retained approximately 20% of its activity after heating treatment. As shown in Fig. 2, the preliminary screening results showed that mutants S265G, S276A and S347G displayed enhanced thermostability. Consequently, these three mutants were purified for further studies.
Thermostability of CsnTS variants
The CsnTS variants were purified by Ni2+-chelating affinity columns and determined by SDS-PAGE. All variants as well as the wild-type CsnTS have a molecular mass of about 46 kDa. The half-lives of the wild-type CsnTS and its variants were measured at 60 °C. As shown in Table 2, the half-life of the wild-type CsnTS was 5.32 min while that of the three mutants S265G, S276A and S347G displayed longer half-lives of 34.57 min, 36.79 min and 7.2 min, respectively. Temperature profiles of the wild-type and all single-site mutants are shown in Fig. 3a. All mutants display a wider range of temperature stability than the wild-type CsnTS. Notably, the mutant S276A exhibits an enzymatic activity of 70%, even at a high temperature of 80 °C while the wild-type enzyme has completely lost its activity at this temperature. The optimal temperature of S347G is 55 °C, which is lower than that of the wild-type enzyme. To study the relationship between the thermal stability and protein conformation, a DSC assay was applied to measure the Tm values of the wild-type and all mutated enzymes. The results are shown in Table 2 and Figure S1. The Tm values of mutants S265G and S276A are increased by 3 °C and 2 °C, respectively, as compared to the Tm of 62 °C of the wild-type enzyme, while S347G displays the decreased Tm value. The optimal pH values of the mutated enzymes are identical to that of the wild-type CsnTS (data not shown).
The specific activities of mutants S276A and S347G are 456 and 602 U/mg and thus similar to the specific activity of wild-type CsnTS of 566 U/mg, whereas the specific activity of mutant S265G is 279 U/mg and hence significantly lower. The Km values of all three mutants are slightly increased. The Kcat of mutant S276A is increased while the Kcat of mutant S265G is significantly decreased. Lastly, the S347G mutant has a Kcat value similar to that of wild-type CsnTS (Table 3).
Combinations of beneficial mutations
Recent studies have shown that combining two or more beneficial mutations can further improve the thermostability of proteins7,10,28. Therefore, we constructed mutant combinations from the identified three mutants to further improve the thermostability of CsnTS.
Our experimental results are as follows: The half-lives of the purified combined mutants S265G/S276A, S265G/S347G, S276A/S347G and S265G/S276A/S347G are 51.84 min, 34.62 min, 44.88 min and 55.31 min at 60 °C (Table 2), respectively. Except for the S265G/S347G mutant, all other combined mutants display a significantly higher thermostability than those of the single mutants. The Tm values of these combined mutants are about 6 °C higher than the Tm of wild-type CsnTS. In addition, all combined mutants display stability over a much wider temperature range (Fig. 3b); they all remain enzymatically active on a 80% level for temperatures between 45 and 75 °C. Remarkably, mutant S276A/S347G performed best by exhibiting enzymatic activity between 40 and 80 °C, with an optimal temperature between 50 and 65 °C.
Moreover, the optimal pH values and pH stabilities of the double and triple mutated enzymes are similar to those of wild-type CsnTS and single-site mutants (data not shown). Although the S265G single-site mutant has a significantly reduced enzymatic activity, all other multi-site mutants that include S265G display catalytic abilities similar to that of wild-type CsnTS.
We anticipate our thermostable mutations will become very useful for industrial applications, and may also be further improved by using a methodology similar as presented herein.
Structural interpretation for increased thermostability in mutants
To better understand the factors that affect the thermostability of these mutants, we compared the generated structures of CsnTS and mutants. As has been previously confirmed, Ser265 forms hydrogen bonds with nearby residues in the endoglucanase CelA23. With Gly replacing Ser265, the mutated enzyme has now a half-life of 34.57, which is ~ 7 times longer than the half-life of wild-type chitosanase. On the other hand, the specific activity and catalytic ability of the S265G mutant decreased compared to that of the wild type. Ser265 is on the flexible loop adjacent to the substrate binding position (Fig. 1). Intramolecular interaction analysis revealed that the interaction between S265 and Y267 in wild-type CsnTS is replaced by the interaction between G265 and T268 in the S265G mutant (Fig. 4, Table S1). This change in interactions may stabilize the loop. Moreover, the number of intramolecular interactions increased in the S265G mutant as compared to that in the wild-type enzyme. These interactions reduce the flexibility of the loop, thus improving the mutant’s thermostability while resulting in a loss of its catalytic ability. This is in line with previous observations where site-directed mutagenesis of proteins failed to simultaneously improve thermostability and enzymatic activity29,30.
The Ala276–Phe335 interaction in the S276A mutant substitutes the Ser276–Tyr273 interaction in the wild-type chitosanase (Fig. 5, Table S3). The Ser/Ala276 residue is on the α-helix adhered to the enzymatic activity site, Tyr273 is on the loop at the end of the same α-helix, and Phe335 is nearby but on another α-helix. The substituted intramolecular interaction stabilizes the tertiary structure of the protein. Additionally, it also has been reported that alanine residues are beneficial for the α-helix stability31.
Lastly, our analysis of the S265G/S276A/S347G mutant revealed that its intramolecular interactions show many re-arrangements (Table S4). Notably, far more interactions disappeared as compared with those that were created because of the mutation. This could indicate that proper structure arrangements rather than individual intramolecular interactions stabilize the proteins.
Discussion
The thermostability of proteins can be determined by many important structural features32, including hydrogen bonds33, salt bridges19,34, aromatic π–π interactions, and cation–π interactions. Thermostability can be improved by a number of methods6. One such method compares the sequence of a protein with that of a thermostable and highly homologous counterpart. This can suggest residues that are potentially influencing thermostability and may be modified in the original protein. By engineering and screening of enzymes with mutations at such residues, mutants with improved thermostability have been identified for several enzymes already14,15,35,36.
In this study, we successfully adopted this method and engineered CsnTS mutants with improved thermostability. We selected several serines as mutation targets through structure comparison of CsnTS and CelA from Clostridium thermocellum and simultaneously considering statistical data revealing that serine residues are not favorable for thermostability23,24. By screening a total of 15 mutants with a single mutation in one serine residue, we identified three mutations, namely S265G, S276A and S347G, which are particularly beneficial for our purpose. Our study shows that all mutants, with single-site mutations and with combined mutations, exhibit a higher thermostability than the wild-type chitosanase. Moreover, all combined mutants outperformed the single-site mutants.
Statistical analysis of structural distribution of amino acids between thermophilic and mesophilic proteins revealed that serine was observed at low frequency at the surface21,22,37. In single serine mutants, the increased intramolecular interactions were found to be the main factors that could enhance thermal stability38. However, the number of intramolecular interactions of the multiple mutant S265G/S276A/S347G, is lower than that of the wild-type CsnTS. Thus, we hypothesize the re-arrangements in intramolecular interactions may contribute most toward the enhanced thermostability of the multiple mutant S265G/S276A/S347G.
In summary, we engineered mutants of chitosanase from Bacillus sp. TS following structure comparison with CelA from Clostridium thermocellum. Mutants S276A and S347G were identified as those that exhibit a higher thermostability in comparison to the wild-type chitosanase without losing catalytic activity. In addition, most of combinations of these mutations enhanced the thermostability of the enzyme further, making these mutants more enzymatically active during hydrolysis of chitosan than wild-type chitosanase. We presented a promising avenue for rational design and anticipate our recombinant mutants will have great potential for industrial applications.
Data availability
The datasets used and/or analysed during the current study available from the corresponding author on reasonable request.
References
Weikert, T., Niehues, A., Cord-Landwehr, S., Hellmann, M. J. & Moerschbacher, B. M. Reassessment of chitosanase substrate specificities and classification. Nat. Commun. 8, 1698. https://doi.org/10.1038/s41467-017-01667-1 (2017).
Xia, W. S., Liu, P., Zhang, J. L. & Chen, J. Biological activities of chitosan and chitooligosaccharides. Food Hydrocolloid 25, 170–179. https://doi.org/10.1016/j.foodhyd.2010.03.003 (2011).
Jung, W. J. & Park, R. D. Bioproduction of chitooligosaccharides: Present and perspectives. Mar. Drugs 12, 5328–5356. https://doi.org/10.3390/md12115328 (2014).
Thadathil, N. & Velappan, S. P. Recent developments in chitosanase research and its biotechnological applications: A review. Food Chem. 150, 392–399. https://doi.org/10.1016/j.foodchem.2013.10.083 (2014).
Zhou, Z. et al. Extracellular overexpression of chitosanase from Bacillus sp. TS in Escherichia coli. Appl. Biochem. Biotechnol. 175, 3271–3286. https://doi.org/10.1007/s12010-015-1494-5 (2015).
Rigoldi, F., Donini, S., Redaelli, A., Parisini, E. & Gautieri, A. Review: Engineering of thermostable enzymes for industrial applications. APL Bioeng. 2, 011501. https://doi.org/10.1063/1.4997367 (2018).
Liang, C. et al. Improving the thermoactivity and thermostability of pectate lyase from Bacillus pumilus for ramie degumming. Appl. Microbiol. Biotechnol. 99, 2673–2682. https://doi.org/10.1007/s00253-014-6091-y (2015).
Yi, Z. L. & Wu, Z. L. Mutations from a family-shuffling-library reveal amino acid residues responsible for the thermostability of endoglucanase CelA from Clostridium thermocellum. Biotechnol. Lett. 32, 1869–1875. https://doi.org/10.1007/s10529-010-0363-0 (2010).
Deng, Z. et al. Structure-based engineering of alkaline alpha-amylase from alkaliphilic Alkalimonas amylolytica for improved thermostability. Appl. Microbiol. Biotechnol. 98, 3997–4007. https://doi.org/10.1007/s00253-013-5375-y (2014).
Deng, Z., Yang, H., Shin, H. D., Li, J. & Liu, L. Structure-based rational design and introduction of arginines on the surface of an alkaline alpha-amylase from Alkalimonas amylolytica for improved thermostability. Appl. Microbiol. Biotechnol. 98, 8937–8945. https://doi.org/10.1007/s00253-014-5790-8 (2014).
Li, G. et al. Improvement of GH10 family xylanase thermostability by introducing of an extra α-helix at the C-terminal. Biochem. Biophys. Res. Commun. 515, 417–422. https://doi.org/10.1016/j.bbrc.2019.05.163 (2019).
Han, Y., Gao, P., Yu, W. & Lu, X. Thermostability enhancement of chitosanase CsnA by fusion a family 5 carbohydrate-binding module. Biotechnol. Lett. 39, 1895–1901. https://doi.org/10.1007/s10529-017-2406-2 (2017).
Han, Y., Gao, P., Yu, W. & Lu, X. N-terminal seven-amino-acid extension simultaneously improves the pH stability, optimal temperature, thermostability and catalytic efficiency of chitosanase CsnA. Biotechnol. Lett. 40, 75–82. https://doi.org/10.1007/s10529-017-2436-9 (2018).
Zhou, C., Xue, Y. & Ma, Y. Enhancing the thermostability of alpha-glucosidase from Thermoanaerobacter tengcongensis MB4 by single proline substitution. J. Biosci. Bioeng. 110, 12–17. https://doi.org/10.1016/j.jbiosc.2009.12.002 (2010).
Xiao, Z. et al. Improvement of the thermostability and activity of a pectate lyase by single amino acid substitutions, using a strategy based on melting-temperature-guided sequence alignment. Appl. Environ. Microbiol. 74, 1183–1189. https://doi.org/10.1128/AEM.02220-07 (2008).
Zouari Ayadi, D. et al. Improvement of Trichoderma reesei xylanase II thermal stability by serine to threonine surface mutations. Int. J. Biol. Macromol. 72, 163–170. https://doi.org/10.1016/j.ijbiomac.2014.08.014 (2015).
Boonyapakron, K., Chitnumsub, P., Kanokratana, P. & Champreda, V. Enhancement of catalytic performance of a metagenome-derived thermophilic oligosaccharide-specific xylanase by binding module removal and random mutagenesis. J. Biosci. Bioeng. 131, 13–19. https://doi.org/10.1016/j.jbiosc.2020.09.008 (2021).
Han, N. et al. Enhancing thermal tolerance of a fungal GH11 xylanase guided by B-factor analysis and multiple sequence alignment. Enzyme Microb. Technol. 131, 109422. https://doi.org/10.1016/j.enzmictec.2019.109422 (2019).
Du, J. et al. Understanding thermostability factors of barley limit dextrinase by molecular dynamics simulations. Front. Mol. Biosci. 7, 51. https://doi.org/10.3389/fmolb.2020.00051 (2020).
Wang, Q. Y. et al. Active hydrogen bond network (AHBN) and applications for improvement of thermal stability and pH-sensitivity of pullulanase from Bacillus naganoensis. PLoS One 12, e0169080. https://doi.org/10.1371/journal.pone.0169080 (2017).
Yokota, K., Satou, K. & Ohki, S.-Y. Comparative analysis of protein thermostability: Differences in amino acid content and substitution at the surfaces and in the core regions of thermophilic and mesophilic proteins. Sci. Technol. Adv. Mater. 7, 255–262. https://doi.org/10.1016/j.stam.2006.03.003 (2006).
Pack, S. P. & Yoo, Y. J. Protein thermostability: Structure-based difference of amino acid between thermophilic and mesophilic proteins. J. Biotechnol. 111, 269–277. https://doi.org/10.1016/j.jbiotec.2004.01.018 (2004).
Alzari, P. M., Souchon, H. & Dominguez, R. The crystal structure of endoglucanase CelA, a family 8 glycosyl hydrolase from Clostridium thermocellum. Structure 4, 265–275. https://doi.org/10.1016/S0969-2126(96)00031-7 (1996).
Stojanoski, V. et al. Removal of the side chain at the active-site serine by a glycine substitution increases the stability of a wide range of serine β-lactamases by relieving steric strain. Biochemistry 55, 2479–2490. https://doi.org/10.1021/acs.biochem.6b00056 (2016).
Zhou, Z. et al. A highly conserved aspartic acid residue of the chitosanase from Bacillus sp. TS is involved in the substrate binding. Appl. Biochem. Biotechnol. 180, 1167–1179. https://doi.org/10.1007/s12010-016-2159-8 (2016).
Adachi, W. et al. Crystal structure of family GH-8 chitosanase with subclass II specificity from Bacillus sp. K17. J. Mol. Biol. 343, 785–795. https://doi.org/10.1016/j.jmb.2004.08.028 (2004).
Schwarz, W. H., Grabnitz, F. & Staudenbauer, W. L. Properties of a Clostridium thermocellum endoglucanase produced in Escherichia coli. Appl. Environ. Microbiol. 51, 1293–1299 (1986).
Yi, Z. L., Pei, X. Q. & Wu, Z. L. Introduction of glycine and proline residues onto protein surface increases the thermostability of endoglucanase CelA from Clostridium thermocellum. Bioresour. Technol. 102, 3636–3638. https://doi.org/10.1016/j.biortech.2010.11.043 (2011).
Liang, C. et al. Directed evolution of a thermophilic endoglucanase (Cel5A) into highly active Cel5A variants with an expanded temperature profile. J. Biotechnol. 154, 46–53. https://doi.org/10.1016/j.jbiotec.2011.03.025 (2011).
Tang, S. Y. et al. Enhancing thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2 by DNA shuffling. FEBS J. 273, 3335–3345. https://doi.org/10.1111/j.1742-4658.2006.05337.x (2006).
Chou, P. Y. & Fasman, G. D. Empirical predictions of protein conformation. Annu. Rev. Biochem. 47, 251–276. https://doi.org/10.1146/annurev.bi.47.070178.001343 (1978).
Karshikoff, A., Nilsson, L. & Ladenstein, R. Rigidity versus flexibility: The dilemma of understanding protein thermal stability. FEBS J. 282, 3899–3917. https://doi.org/10.1111/febs.13343 (2015).
Sheng, J., Ji, X., Zheng, Y., Wang, Z. & Sun, M. Improvement in the thermostability of chitosanase from Bacillus ehimensis by introducing artificial disulfide bonds. Biotechnol. Lett. 38, 1809–1815. https://doi.org/10.1007/s10529-016-2168-2 (2016).
Lebbink, J. H., Consalvi, V., Chiaraluce, R., Berndt, K. D. & Ladenstein, R. Structural and thermodynamic studies on a salt-bridge triad in the NADP-binding domain of glutamate dehydrogenase from Thermotoga maritima: Cooperativity and electrostatic contribution to stability. Biochemistry 41, 15524–15535 (2002).
Zhao, Q., Liu, H., Zhang, Y. & Zhang, Y. Engineering of protease-resistant phytase from Penicillium sp.: High thermal stability, low optimal temperature and pH. J. Biosci. Bioeng. 110, 638–645. https://doi.org/10.1016/j.jbiosc.2010.08.003 (2010).
de Souza, A. R. et al. Engineering increased thermostability in the GH-10 endo-1,4-beta-xylanase from Thermoascus aurantiacus CBMAI 756. Int. J. Biol. Macromol. 93, 20–26. https://doi.org/10.1016/j.ijbiomac.2016.08.056 (2016).
Szilagyi, A. & Zavodszky, P. Structural differences between mesophilic, moderately thermophilic and extremely thermophilic protein subunits: Results of a comprehensive survey. Structure 8, 493–504 (2000).
Ibrahim, B. S. & Pattabhi, V. Role of weak interactions in thermal stability of proteins. Biochem. Biophys. Res. Commun. 325, 1082–1089. https://doi.org/10.1016/j.bbrc.2004.10.128 (2004).
Acknowledgements
We thank the Tianjin Institute of Industrial Biotechnology, CAS for the kind help of using instruments.
Funding
This work was supported by Ph.D. Fellowship Research Foundation of Nanfang College of Sun Yat-sen University (No. 2020BQ05).
Author information
Authors and Affiliations
Contributions
Z.Z. and X.W. conceived and designed the experiments. Z.Z. performed the experiments. Z.Z. and X.W. analyzed experimental data and wrote the main manuscript. All authors reviewed the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhou, Z., Wang, X. Improve thermostability of Bacillus sp. TS chitosanase through structure-based alignment. Sci Rep 11, 15846 (2021). https://doi.org/10.1038/s41598-021-95369-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-021-95369-w
- Springer Nature Limited
This article is cited by
-
Gene cloning and molecular characterization of a thermostable chitosanase from Bacillus cereus TY24
BMC Biotechnology (2022)