Studies on the static and dynamic deformation of isotropic and anisotropic elastic shell-like bodies of complex shape performed using classical and refined problem statements are reviewed. To solve two-dimensional boundary-value problems and eigenvalue problems, use is made of a nontraditional discrete-continuum approach based on the spline-approximation of the unknown functions of partial differential equations with variable coefficients. This enables reducing the original problem to a system of one-dimensional problems solved with the discrete-orthogonalization method. An analysis is made of numerical results on the distribution of stress and displacement fields and dynamic characteristics depending on the loading and boundary conditions, geometrical and mechanical parameters of elastic bodies. Emphasis is placed on the accuracy of the results
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. H. Ahlberg, E. N. Nilson, and J. L. Walsh, The Theory of Splines and Their Applications, Academic Press, New York (1967).
S. A. Ambartsumyan, General Theory of Anisotropic Shells [in Russian], Nauka, Moscow (1974).
R. E. Bellman and R. E. Kalaba, Quasilinearization and Nonlinear Boundary-Value Problems, Elsevier, New York (1965).
V. L. Biderman, Mechanics of Thin-Walled Structures [in Russian], Mashinostroenie, Moscow (1977).
V. Z. Vlasov, General Theory of Shells and Its Applications in Engineering, NASA TTF 99, April (1964).
S. K. Godunov, “Numerical solution of boundary-value problems for systems of linear ordinary differential equations,” Usp. Mat. Nauk, 16, No. 3, 171–174 (1961).
S. K. Golushko and Yu. V. Nemirovskii, Direct and Inverse Problems in the Mechanics of Elastic Composite Plates and Shells [in Russian], Fiz.-Mat. Lit., Moscow (2008).
A. L. Goldenveizer, Theory of Elastic Thin Shells [in Russian], Nauka, Moscow (1976).
E. I. Grigolyuk and E. A. Kogan, Statics of Elastic Layered Shells [in Russian], NII Mekh. MGU, Moscow (1999).
A. Ya. Grigorenko, “Calculation of natural vibrations of rectangular plates of variable thickness by the spline-collocation method,” Prikl. Mekh., 27, No. 2, 123–126 (1990).
A. Ya. Grigorenko, T. L. Efimova, and L. V. Sokolov, “Free vibrations of nonclosed orthotropic shells of variable thickness,” Methods for Solving Applied Problems in Solid Mechanics [in Russian], 13, (2012), pp. 99–105.
A. Ya. Grigorenko, T. L. Efimova, and S. V. Puzyrev, “Analysis of the free vibrations of orthotropic rectangular plates with linearly varying thickness,” Mat. Metody Fiz.-Mekh. Polya, 49, No. 3, 153–161 (2006).
A. Ya. Grigorenko and S. A. Mal’tsev, “Solving problems of the free vibrations of conical shells of variable thickness,” Dop. NAN Ukrainy, No. 7, 63–69 (2009).
A. Ya. Grigorenko and S. A. Mal’tsev, “Free vibrations of conical shells with thickness varying in two directions,” Dop. NAN Ukrainy, No. 11, 60–69 (2009).
A. Ya. Grigorenko and A. Yu. Parkhomenko, ”Free vibrations of shallow shells of variable thickness: Refined numerical solution,” Dop. NAN Ukrainy, No. 12, 50–54 (2009).
Ya. M. Grigorenko, Isotropic and Anisotropic Layered Shells of Revolution with Variable Stiffness [in Russian], Naukova Dumka, Kyiv (1973).
Ya. M. Grigorenko and M. N. Berenov, “Solving two-dimensional problems of the bending of rectangular plates using spline-approximation,” Dop. AN URSRm Ser. A, No. 8, 22–25 (1987).
Ya. M. Grigorenko, E. I. Bespalova, A. T. Vasilenko, and L. N. Petrova, “Computer solution of static problems for shells of revolution under arbitrary loadingm” in: Proc. 4th All-Union Conf. on the Use of Computers in Structural Engineering [in Russian], Naukova Dumka, Kyiv (1968), pp. 46–51.
Ya. M. Grigorenko and A. T. Vasilenko, “Numerical solution of boundary-value problems of the stress state of shells of revolution,” in: Abstracts of 5th All-Union Conf. on the Theory of Plates and Shells [in Russian], Nauka, Moscow (1965), pp. 18–19.
Ya. M. Grigorenko and A. T. Vasilenko, Static Problems for Anisotropic Inhomogeneous Shells [in Russian], Nauka, Moscow (1992).
Ya. M. Grigorenko, A. T. Vasilenko, and G. P. Golub, Statics of Anisotropic Shells with Finite Shear Stiffness [in Russian], Naukova Dumka, Kyiv (1987).
Ya. M. Grigorenko, G. G. Vlaikov, and A. Ya. Grigorenko, Numerical Analytic Solution of Shell Problems Based on Various Models [in Russian], Akademperiodika, Kyiv (2006).
A. N. Guz, Stability of Three-Dimensional Deformable Bodies [in Russian], Naukova Dumka, Kyiv (1971).
A. N. Guz, I. S. Chernyshenko, V. N. Chekhov, et al., Theory of Thin Shells Weakened by Holes, Vol. 1 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1980).
Yu. S. Zav’yalov, Yu. I. Kvasov, and V. L. Miroshnichenko, Spline-Function Methods [in Russian], Nauka, Moscow (1980).
A. V. Karmishin, V. A. Lyaskovets, V. I. Myachenkov, and A. N. Frolov, Statics and Dynamics of Thin-Walled Shell Structures [in Russian], Mashinostroenie, Moscow (1975).
S. G. Lekhnitskii, Theory of Elasticity of an Anisotropic Body, Mir, Moscow (1981).
Kh. M. Mushtari, “Some generalizations of the theory of thin shells with application to problems of the stability of elastic equilibrium,” Prikl. Mat. Mekh., 2, No. 14, 439–456 (1939).
Kh. M. Mushtari and K. Z. Galimov, Nonlinear Theory of Elastic Shells [in Russian], Tatknigoizdat, Kazan (1957).
V. V. Novozhilov, Thin Shell Theory, Noordhoff, Groningen (1964).
B. L. Pelekh, Theory of Shells with Finite Shear Stiffness [in Russian], Naukova Dumka, Kyiv (1973).
O. A. Avramenko, “Stress–strain analysis of nonthin conical shells with thickness varying in two coordinate directions,” Int. Appl. Mech., 48, No. 3, 332–342 (2012).
V. Birman, Plate Sructures, Ser. Solids Mechanics and Applications, Spinger, Berlin (2011).
V. D. Budak, A. Ya. Grigorenko, and S. V. Puzyrev, “Solution describing the natural vibrations of rectangular shallow shells with varying thickness,” Int. Appl. Mech., 43, No. 4, 432–441 (2007).
V. D. Budak, A. Ya. Grigorenko, and S. V. Puzyrev, “Free vibrations of rectangular orthotropic shallow shells with varying thickness,” Int. Appl. Mech., 43, No. 6, 670–682 (2007).
L. H. Donnel, Beams, Plates, and Shells, McGraw-Hill, New York (1976).
W. Flugge, Stresses in Shells, Springer, Berlin (1967).
A. Ya. Grigorenko, “Investigation of the dynamical characteristics of anisotropic in homogeneous cylinders with circular and non-circular cross section on the base of the numerical research,” in: 2nd Eur. Conf. Comput. Mech. (Cracow, Poland, June 26–29), Abstract and Full Paper on Enclosed CD-ROM (2001), pp. 846–847.
A. Ya. Grigorenko and T. L. Efimova, “Spline-approximation method applied to solve natural-vibration problems for rectangular plates of varying thickness,” Int. Appl. Mech., 41, No. 10, 1161–1169 (2005).
A. Ya. Grigorenko and T. L. Efimova, “Application of the spline-approximation method for solving the problems on axisymmetric natural vibrations of thick-wall orthotropic cylinders,” Int. Appl. Mech., 44, No. 10, 1137–1147 (2008).
A. Ya. Grigorenko and T. L. Efimova, “Free axisymmetric vibrations of solids cylinders: Numerical problem solving,” Int. Appl. Mech., 46, No. 5, 499–508 (2010).
A. Ya. Grigorenko, T. L. Efimova, and L. V. Sokolova, “On the approach to studying free vibrations of cylindrical shells of variable thickness in the circumferential direction within a refined statement” J. Math. Sci., 181, No. 4, 548–563 (2010).
A. Ya. Grigorenko, I. I. Dyyak, and V. M. Makar, “Influence of anisotropy on the response characteristics of finite cylinders under free vibrations,” Int. Appl. Mech., 37, No. 5, 628–637 (2001).
A. Ya. Grigorenko and I. A. Loza, “Axisymmetric waves in layered hollow cylinders with axially polarized piezoceramic layers,” Int. Appl. Mech., 47, No. 6, 707–713 (2011).
A. Grigorenko and V. Makar, “Free vibrations of the thick hollow anisotropic cylinders,” in: Abstracts of 8th Int. Conf. on Modern Building Materials, Structures and Techniques (May 19–21, 2004), Technika, Vilnius (2004), pp. 759–764.
A. Ya. Grigorenko and S. A. Mal’tsev, “Natural vibrations of thin conical panels of variable thickness,” Int. Appl. Mech., 45, No. 11, 1221–1231 (2009).
A. Ya. Grigorenko, W. H. Muller, R. Wille, and S. N. Yaremchenko, “Numerical solution of the problem on the stress-strain state in hollow cylinders using spline-approximations,” J. Math. Sci., 180, No. 2, 135–145 (2012).
A. Ya. Grigorenko and A. Yu. Parkhomenko, “Free vibrations of shallow nothin shells with variable thickness and rectangular planform,” Int. Appl. Mech., 46, No. 7, 776–789 (2010).
A. Ya. Grigorenko and A. Yu. Parkhomenko, “Free vibrations of orthotropic shallow shells with variable thickness and rectangular planform,” Int. Appl. Mech., 46, No. 8, 877–889 (2010).
A. Ya. Grigorenko and T. V. Tregubenko, “Numerical and experimental analysis of natural vibration of rectangular plates with variable thickness,” Int. Appl. Mech., 36, No. 2, 268–271 (2000).
A. Ya. Grigorenko and G. G. Vlaikov, “Some problems of the theory of elasticity for anisotropic shells of noncircular cross-section,” in: Proc. 7th Conf. on Shell Structures, Theory and Applications, Golansk-Jurata (Poland) (2002), pp. 97–98.
A. Ya. Grigorenko and G. G. Vlaikov, Some Problems of the Theory of Elasticity for Anisotropic Bodies of Cylindrical Form, Inst. Mekh. NAN Ukrainy i Teckn. Tsentr NAN Ukrainy, Kyiv (2002).
A. Ya. Grigorenko and G. G. Vlaikov, “Numerical analysis of anisotropic circular and non-circular cylinder,” in: CMM-2003-Computer Methods in Mechanics (June 3–6, Gliwice, Poland): Abst. and Full Paper on Enclosed CD-ROM (2003), pp. 141–142.
A. Ya. Grigorenko and G. G. Vlaikov, “Investigation of the static and dynamic behaviour of anisotropic cylindrical bodies with noncircular cross-section,” Int. J. Solids Struct., 41, 2781–2798 (2004).
A. Ya. Grigorenko, O.V. Vovkodav, and S. N. Yaremchenko, “Stress–strain state of nothing orthotropic spherical shells of variable thickness,” Int. Appl. Mech., 48, No. 1, 80–93 (2012).
A. Ya. Grigorenko and N. P. Yaremchenko, “Stress–strain state of shallow shells with rectangular planform and varying thickness: Refined formulation,” Int. Appl. Mech., 43, No. 10, 1132–1141 (2007).
A. Ya. Grigorenko and N. P. Yaremchenko, “Stress–state of nothin orthotropic shells with varying thickness and rectangular planform,” Int. Appl. Mech., 44, No. 8, 905–915 (2008).
A. Grigorenko, N. Yaremchenko, and S. Yaremchenko, “Spline–based investigation of stress–strain of anisotropic rectangular shallow shells of variable thickness in refined formulation,” in: Proc. Int. Symp. on Advances in Applied Mechanics and Modern Information Technology, Baku, Azerbaijan (2011), pp. 171–175.
A. Grigorenko and S. Yaremchenko, “Spline-approximation method for investigation of mechanical behavior of anisotropic inhomogeneous shells,” in: Proc. 9th Int. Conf. on Modern Building Materials, Strucruct. and Techniques, Technika, Vilnius (2007), pp. 918–924.
A. Grigorenko and S. Yaremchenko, “Investigation of static and dynamic behaviour of anisotropic inhomogeneous shallow shells by spline approximation method,” J. Civ. Eng. Manag., 15, No. 1, 87–93 (2009).
A. Grigorenko and S. Yaremchenko, “Static problems for noncircular cylindrical shells: Classical and refined theories,” in: Proc. 9th Conf. on Shell Structures and Applications, 2, Gdansk-Jurata, Taylor and Francis Group, London, UK (2009), pp. 241–244.
A. Grigorenko and S. Yaremchenko, “Solution of stress-strain problems for noncircular cylindrical shells based upon different models,” in: Proc. 10th Int. Conf. on Modern Building Materials Structures and Techniques, II, VGTV leidyklos, Technika, Lithuania (2010), pp. 885–889.
Ya. M. Grigorenko, “Solution of problems in the theory of shells by numerical-analysis methods,” Int. Appl. Mech., 20, No. 10, 881–897 (1984).
Ya. M. Grigorenko, “Some approaches to modelling and numerical solution of the deformation problems of the flexible shells of revolution,” in: Eur. Mech. Colloq. EUROMECH 292, Modelling of Shells with Nonlinear Behaviour, Germany, September 2–4 (1992), pp. 12.1–12.2.
Ya. M. Grigorenko, “Influence of anistropy and non-homogeneity on the deformation of flexible shells,” in: Euromech Colloq. 317, Buckling Strength of Imperfection-Sensitive Shells (March 21–23, 1994), Liverpool (1994), p. 44.
Ya. M. Grigorenko, “Some approaches to the numerical solution of linear and nonlinear problems on deforming of elastic shell systems,” in: Proc. 3rd Int. Congr. Industr. and Appl. Math., Germany, Hamburg, July 3–7 (1995), p. 294.
Ya. M. Grigorenko, “Nonconvential approaches to static problems for noncircular cylindrical shells in different formulations,” Int. Appl. Mech., 43, No. 1, 35–53 (2007).
Ya. M. Grigorenko, “Using discrete Fourier series to solve boundary-value stress problems for elastic bodies with complex geometry and structures,” Int. Appl. Mech., 45, No. 5, 470–513 (2009).
Ya. M. Grigorenko and O. A. Avramenko, “Stress–strain analysis of closed nonthin orthotropic conical shells of varying thickness,” Int. Appl. Mech., 44, No. 6, 635–643 (2008).
Ya. M. Grigorenko and O. A. Avramenko, “Influence of geometrical and mechanical parameters on the stress-strain state of closed nothin conical shells stress–strain analysis of closed nonthin orthotropic conical shells of varying thickness,” Int. Appl. Mech., 44, No. 10, 1119–1127 (2008).
Ya. M. Grigorenko, O. A. Avramenko, and S. N. Yaremchenko, “Spline-approximation solution of two-dimensional problems of statics for orthotropic conical shells in a refined formulation,” Int. Appl. Mech., 43, No. 11, 1218–1227 (2007).
Ya. M. Grigorenko and M. N. Berenov, “Numerical solution of problems in the statics of flattened shells on the basis of the spline collocation method,” Int. Appl. Mech., 24, No. 5, 458–463 (1988).
Ya. M. Grigorenko and M. N. Berenov, “Solution of problems of the statics of shallow shells and plates with hinged and rigidly–fastened opposing edges,” Int. Appl. Mech., 26, No. 1, 25–31 (1990).
Ya. M. Grigorenko, A. Ya. Grigorenko, and T. L. Efimova, “Spline-based investigation of natural vibrations of orthotropic rectangular plates of variable thickness within classical and refined theories,” J. Mech. Struct., 3, No. 5, 929–952 (2008).
Ya. M. Grigorenko, A. Ya. Grigorenko, and L. S. Rozhok, “Solving the stress problem for solid cylinders with different end conditions,” Int. Appl. Mech., 42, No. 6, 629–635 (2006).
Ya. M. Grigorenko, A. Ya. Grigorenko, and G. G. Vlaikov, Problems of Mechanics for Anisotropic Inhomogeneous Shells on the Basis of Different Models, Akademperiodika, Kyiv (2009).
Ya. M. Grigorenko, A. Ya. Grigorenko, and L. I. Zakhariichenko, “Stress–strain analysis of orthotropic closed and open noncircular cylindrical shells,” Int. Appl. Mech., 41, No. 7, 778–785 (2005).
Ya. M. Grigorenko, A. Ya. Grigorenko, and L. I. Zakhariichenko, “Stress analysis of noncircular cylindrical shells with cross-section in the form of connected convex half-corrugations,” Int. Appl. Mech., 42, No. 4, 431–438 (2006).
Ya. M. Grigorenko, A. Ya. Grigorenko, and L. I. Zakhariichenko, “Influence of geometrical parameters on the stress–strain state of longitudinally corrugated cylindrical shells,” Int. Appl. Mech., 45, No. 2, 778–785 (2009).
Ya. M. Grigorenko and N. N. Kryukov, “Solution of problems of the theory of plates and shells with spline functions (survey),” Int. Appl. Mech., 31, No. 6, 413–434 (1995).
Ya. M. Grigorenko and N. N. Kryukov, “Investigation of the asymmetric stressed–strained state of transversely isotropic cylinders under different boundary conditions at the ends,” Int. Appl. Mech., 34, No. 7, 607–614 (1998).
Ya. M. Grigorenko, N. N. Kryukov, and Yu. I. Ivanova, “Solution of two-dimensional problems of the statics of flexible shallow shells by spline approximation,” Int. Appl. Mech., 31, No. 4, 255–261 (1995).
Ya. M. Grigorenko, N. N. Kryukov, and Yu. I. Ivanova, “Spline-approximation solution of problems of the statics of orthotropic shallow shells with variable parameters,” Int. Appl. Mech., 36, No. 7, 888–897 (2000).
Ya. M. Grigorenko, N. N. Kryukov, and N. S. Yakovenko, “Using spline-functions to solve boundary-value problems for laminated orthotropic trapezoidal plates of variable thickness,” Int. Appl. Mech., 41, No. 4, 413–420 (2005).
Ya. M. Grigorenko and O. V. Tumashova, “Stress–strain state of flexible cylindrical panels with variable geometric parameters,” Int. Appl. Mech., 25, No. 5, 454–461 (1989).
Ya. M. Grigorenko and O. V. Tumashova, “Computation of flexible finite-size cylindrical panels of noncircular cross section,” Int. Appl. Mech., 28, No. 12, 839–842 (1992).
Ya. M. Grigorenko and S. N. Yaremchenko, “Stress analysis of orthotropic noncircular cylindrical shells of variable thickness in a refined formulation,” Int. Appl. Mech., 40, No. 3, 266–274 (2004).
Ya. M. Grigorenko and S. N. Yaremchenko, “Influence of variable thickness on displacements and stresses in nonthin cylindrical orthotropic shells with elliptic cross-section,” Int. Appl. Mech., 40, No. 8, 900–907 (2004).
Ya. M. Grigorenko and S. N. Yaremchenko, “Refined design of corrugated noncircular cylindrical shells,” Int. Appl. Mech., 41, No. 1, 7–13 (2005).
Ya. M. Grigorenko and S. N. Yaremchenko, “Spline-approximation solution of two-dimensional problems of statics for orthotropic conical shells in a refined formulation,” Int. Appl. Mech., 43, No. 11, 1218–1227 (2007).
Ya. M. Grigorenko and S. N. Yaremchenko, “Refined design of longitudinally corrugated cylindrical shells,” Int. Appl. Mech., 48, No. 2, 205–211 (2012).
Ya. M. Grigorenko and L. I. Zakhariichenko, “Solution of the problem of the stress state of noncircular cylindrical shells of variable thickness,” Int. Appl. Mech., 34, No. 12, 1196–2003 (1998).
Ya. M. Grigorenko and L. I. Zakhariichenko, “Analysis of the stress-strain state of non-circular cylindrical shells subject to thickness variation and weight retention,” Int. Appl. Mech., 35, No. 6, 567–576 (1999).
Ya. M. Grigorenko and L. I. Zakhariichenko, “Design of corrugated cylindrical shells under different end conditions,” Int. Appl. Mech., 35, No. 9, 897–905 (1999).
Ya. M. Grigorenko and L. I. Zakhariichenko, “Studying the effect of the spatial frequency and amplitude of corrugation on the stress-strain state of cylindrical shells,” Int. Appl. Mech., 39, No. 12, 1429–1435 (2003).
L. Librescu, Elastostatics and Kinetics of Anisotropic and Heterogeneous Shell-Type Structures, Noordhoff Inter. Publishing, Leyden, Netherlands (1975).
A. E. H. Love, Mathematical Theory of Elasticity, Cambridge Univer. Press (1952).
E. Ramm and W. A. Wall, “Shell structures — a sensitive interrelation between physics and numerics,” Int. J. Numer. Meth. Eng., 60, 381–427 (2002).
E. Ramm and W. A. Wall, “Computational methods for shells,” Special Issue of Comp. Meth. Appl. Mech. Eng., 184, 2285–2707 (2005).
K. P. Soldatos, “Mechanics of cylindrical shells with non-circular cross-section. A survey,” Appl. Mech. Rev., 52, No. 8, 237–274 (1999).
S. P. Timoshenko, History of the Strength of Materials, McGraw-Hill, New York (1953).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 49, No. 2, pp. 3–70, March–April 2013.
Rights and permissions
About this article
Cite this article
Grigorenko, Y.M., Grigorenko, A.Y. Static and Dynamic Problems for Anisotropic Inhomogeneous Shells with Variable Parameters and Their Numerical Solution (Review). Int Appl Mech 49, 123–193 (2013). https://doi.org/10.1007/s10778-013-0558-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-013-0558-x