The paper deals with some approaches to solving linear and nonlinear boundary-value stress problems for elastic bodies with complex geometry and structure. The problems are described by partial differential equations solved using discrete Fourier series. The results obtained are presented in the form of plots and tables
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. A. Ambartsumyan, General Theory of Anisotropic Shells [in Russian], Nauka, Moscow (1974).
R. E. Bellman and R. E. Kalaba, Quasilinearization and Nonlinear Boundary-Value Problems, Elsevier, New York (1965).
V. Z. Vlasov, General Theory of Shells and Its Application in Engineering [in Russian], Gostekhizdat, Moscow–Leningrad (1949).
K. Z. Galimov, Fundamentals of the Nonlinear Theory of Thin Shells [in Russian], Izd. Kazan. Univ., Kazan’ (1975).
K. Z. Galimov and V. N. Paimushin, Theory of Shells with Complex Geometry [in Russian], Izd. Kazan. Univ., Kazan’ (1985).
S. K. Godunov, “Numerical solution of boundary-value problems for systems of linear ordinary differential equations,” Usp. Mat. Nauk, 16, No. 3, 171–174 (1961).
A. L. Gol’denveizer, Theory of Thin Elastic Shells [in Russian], Nauka, Moscow (1976).
Ya. M. Grigorenko, Isotropic and Anisotropic Laminated Shells of Revolution of Varying Stiffness [in Russian], Naukova Dumka, Kyiv (1973).
Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells of Varying Stiffness, Vol. 4 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1981).
Ya. M. Grigorenko, G. G. Vlaikov, and A. Ya. Grigorenko, Numerical and Analytic Solution of Problems for Shells Using Various Models [in Russian], Akademperiodika, Kyiv (2006).
Ya. M. Grigorenko and A. P. Mukoed, Computer Solution of Linear and Nonlinear Problems of Shell Theory [in Ukrainian], Lybid’, Kyiv (1992).
Ya. M. Grigorenko and N. D. Pankratova, Computational Methods in Problems of Applied Mathematics [in Ukrainian], Lybid’, Kyiv (1995).
Ya. M. Grigorenko and L. S. Rozhok, “Using discrete Fourier series to solve static problems for noncanonical elastic bodies,” Mat. Met. Fiz.-Mekh. Polya, 48, No. 2, 79–100 (2005).
Ya. M. Grigorenko and A. M. Timonin, “An approach to the numerical solution of two-dimensional problems of plate and shell theory with variable parameters,” Int. Appl. Mech., 23, No. 6, 557–563 (1987).
Ya. M. Grigorenko and A. M. Timonin, “Solution of bending problems for complex-shaped plates in orthogonal curvilinear coordinates,” Dokl. AN USSR, Ser. A, No. 2, 51–54 (1987).
Ya. M. Grigorenko and A. M. Timonin, “Solution of static boundary-value problems for anisotropic shells with curved coordinate surfaces,” Dokl. AN USSR, Ser. A, No. 5, 32–34 (1988).
Ya. M. Grigorenko and A.M. Timonin, “Deformation of flexible anisotropic plates with complex geometry: Numerical problem solving,” Dokl. AN USSR, Ser. A, No. 6, 43–47 (1990).
Ya. M. Grigorenko and A. M. Timonin, “An approach to numerical solution of boundary-value problems for shells with complex geometry in nonorthogonal curvilinear coordinates,” Dokl. NAN Ukrainy, No. 4, 42–45 (1991).
Ya. M. Grigorenko and A. M. Timonin, “Numerical solution of boundary-value problems of the mechanics of shells of complex geometry with the use of general coordinate systems,” Int. Appl. Mech., 28, No. 7, 449–455 (1992).
Ya. M. Grigorenko and A. M. Timonin, “Numerical solution of nonlinear boundary-value problems for flexible shells with complex geometry,” Dokl. NAN Ukrainy, No. 12, 3–10 (1992).
Ya. M. Grigorenko and A. M. Timonin, “Approach to the numerical solution of boundary-value problems in the theory of shells in coordinates of general form,” Int. Appl. Mech., 30, No. 4, 257–263 (1994).
A. N. Guz and Yu. N. Nemish, Statics of Noncanonical Elastic Bodies, Vol. 2 of the six-volume series Spatial Problems of the Theory of Elasticity and Plasticity [in Russian], Naukova Dumka, Kyiv (1984).
G. A. Korn and T. M. Korn, Mathematical Handbook for Scientists and Engineers. Definitions, Theorems, and Formulas for Reference and Review, McGraw-Hill Book Company (1968).
S. G. Lekhnitskii, Anisotropic Elasticity Theory [in Russian], Nauka, Moscow (1977).
V. V. Novozhilov, Theory of Thin Shells [in Russian], Sudostroenie, Leningrad (1962).
P. K. Rashevskii, A Course of Differential Geometry [in Russian], Gostekhizdat, Moscow (1950).
S. P. Timoshenko, A Course of the Theory of Elasticity [in Russian], Naukova Dumka, Kyiv (1972).
S. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells, McGraw-Hill, New York (1959).
G. M. Fikhtengol’ts, A Course of Integral and Differential Calculus [in Russian], Gostekhizdat, Moscow–Leningrad (1949).
R. W. Hamming, Numerical Methods for Scientists and Engineers, McGraw-Hill, New York (1962).
K. F. Chernykh, Linear Theory of Shells [in Russian], Izd. Leningr. Univ., Leningrad (1962).
Ya. M. Grigorenko, “Approaches to the numerical solution of linear and nonlinear problems in shell theory in classical and refined formulations”, Int. Appl. Mech., 32, No. 6, 409–442 (1996).
Ya. M. Grigorenko, “Nonconventional approaches to static problems for noncircular cylindrical shells in different formulations,” Int. Appl. Mech., 43, No. 1, 35–53 (2007).
Ya. M. Grigorenko and O. A. Avramenko,” Influence of geometrical and mechanical parameters on the stress–strain state of closed nonthin conical shells,” Int. Appl. Mech., 44, No. 10, 1119–1127 (2008).
Ya. M. Grigorenko, O. A. Avramenko, and S. N. Yaremchenko, “Spline-approximation solution of two-dimensional problems of statics for orthotropic conical shells in a refined formulation,” Int. Appl. Mech., 43, No. 11, 1218–1227 (2007).
Ya. M. Grigorenko and O. A. Avramenko, “Stress–strain analysis of closed nonthin orthotropic conical shells of varying thickness,” Int. Appl. Mech., 44, No. 6, 635–643 (2008).
Ya. M. Grigorenko and L. S. Rozhok, “Stress–strain analysis of rectangular plates with a variable thickness and constant weight,” Int. Appl. Mech., 38, No. 2, 167–173 (2002).
Ya. M. Grigorenko and L. S. Rozhok, “On one approach to the solution of stress problems for noncircular hollow cylinders,” Int. Appl. Mech., 38, No. 5, 562–572 (2002).
Ya. M. Grigorenko and L. S. Rozhok, “Stress analysis of hollow elliptic cylinders with variable eccentricity and thickness,” Int. Appl. Mech., 38, No. 8, 954–966 (2002).
Ya. M. Grigorenko and L. S. Rozhok, “The stress state of laminated inhomogeneous hollow elliptic cylinders under a surface load,” Int. Appl. Mech., 38, No. 9, 1103–1113 (2002).
Ya. M. Grigorenko and L. S. Rozhok, “Stress analysis of corrugated hollow cylinders,” Int. Appl. Mech., 38, No. 12, 1473–1481 (2002).
Ya. M. Grigorenko and L.S. Rozhok, “Discrete Fourier-series method in problems of bending of variable thickness rectangular plates,” J. Eng. Math., 46, No. 3–4, 269–280 (2003).
Ya. M. Grigorenko and L. S. Rozhok, “Solving the stress problem for hollow cylinders with corrugated elliptical cross section,” Int. Appl. Mech., 40, No. 2, 169–175 (2004).
Ya. M. Grigorenko and L. S. Rozhok, “Stress analysis of orthotropic hollow noncircular cylinders,” Int. Appl. Mech., 40, No. 6, 679–685 (2004).
Ya. M. Grigorenko and L. S. Rozhok, “Influence of corrugation frequency and amplitude on the stress state of hollow elliptic cylinders,” Int. Appl. Mech., 40, No. 9, 1012–1017 (2004).
Ya. M. Grigorenko and L. S. Rozhok, “Stress solution for transversely isotropic corrugated hollow cylinders,” Int. Appl. Mech., 41, No. 3, 277–282 (2005).
Ya. M. Grigorenko and L. S. Rozhok, “Equilibrium of elastic hollow inhomogeneous cylinders of corrugated elliptic cross-section,” J. Eng. Math., 54, No. 2, 145–157 (2006).
Ya. M. Grigorenko and L. S. Rozhok, “Stress analysis of circumferentially corrugated hollow orthotropic cylinders,” Int. Appl. Mech., 42, No. 12, 1389–1397 (2006).
Ya. M. Grigorenko and L. S. Rozhok, “Influence of orthotropy parameters on the stress state of hollow cylinders with elliptic cross-section,” Int. Appl. Mech., 43, No. 12, 1372–1379 (2007).
Ya. M. Grigorenko and V. A. Tsybul’nik, “Application of discrete Fourier series in the stress analysis of cylindrical shells of variable thickness with arbitrary end conditions,” Int. Appl. Mech., 41, No. 6, 657–665 (2005).
Ya. M. Grigorenko and V. A. Tsybul’nik, “On a discrete Fourier series solution to static problems for conical shells of circumferentially varying thickness,” Int. Appl. Mech., 41, No. 9, 976–987 (2005).
Ya. M. Grigorenko and V. A. Tsybul’nik, “Stress–strain analysis of conical shells with different boundary conditions and thickness varying in two directions at constant mass,” Int. Appl. Mech., 42, No. 3, 308–317 (2006).
Ya. M. Grigorenko, G. P. Urusova, and L. S. Rozhok, “Stress analysis of nonthin cylindrical shells in refined and spatial formulations,” Int. Appl. Mech., 42, No. 8, 886–894 (2006).
Ya. M. Grigorenko and S. N. Yaremchenko, “Refined analysis of the stress state of orthotropic elliptic cylindrical shells with variable geometrical parameters,” Int. Appl. Mech., 44, No. 9, 998–1005 (2008).
K. P. Soldatos, “Mechanics of cylindrical shells with non-circular cross-section. A survey,” Appl. Mech. Rev., 52, No. 8, 237–274 (1999).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 45, No. 5, pp. 3–52, May 2009.
Rights and permissions
About this article
Cite this article
Grigorenko, Y.M. Using discrete fourier series to solve boundary-value stress problems for elastic bodies with complex geometry and structure. Int Appl Mech 45, 469–513 (2009). https://doi.org/10.1007/s10778-009-0208-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-009-0208-5