The stress–strain state of nonthin conical shells with thickness varying in two coordinate directions is examined using the approach developed to solve boundary-value problems. Displacement and stress fields in such shells are determined and analyzed
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
E. I. Grigolyuk and E. A. Kogan, Statics of Elastic Layered Shells [in Russian], NII Mekh. MGU, Moscow (1999).
Ya. M. Grigorenko, “Stress state of isotropic and anisotropic shells of revolution,” in: Reinforced Materials and Structures Thereof [in Russian], Naukova Dumka, Kyiv (1970), pp. 106–127.
Ya. M. Grigorenko, O. A. Avramenko, and S. N. Yaremchenko, ”Spline-approximation solution of two-dimensional problems of statics for ortotropic conical shells in a refined formulation,” Int. Appl. Mech., 43, No. 11, 1218–1227 (2007).
Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells with Variable Stiffness, Vol. 4 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1981).
Ya. M. Grigorenko, A. T. Vasilenko, and G. P. Golub, Statics of Anisotropic Shells with Finite Shear Stiffness [in Russian], Naukova Dumka, Kyiv (1987).
Ya. M. Grigorenko, G. G. Vlaikov, and A. Ya. Grigorenko, Numerical Analytic Solution of Shell Problems Based on Various Models [in Russian], Akademperiodika, Kyiv (2006).
Ya. M. Grigorenko and N. N. Kryukov, ”Solution of problems of the theory of plates and shells with spline functions (survey),” Int. Appl. Mech., 31, No. 6, 413–434 (1995).
Ya. M. Grigorenko and L. V. Mol’chenko, Fundamentals of the Theory of Plates and Shells [in Ukrainian], Lybid’, Kyiv (1993).
Yu. S. Zav’yalov, Yu. I. Kvasov, and V. L. Miroshnichenko, Spline-Function Methods [in Russian], Nauka, Moscow (1980).
A. D. Kovalenko, Ya. M. Grigorenko, and L. A. Il’in, Theory of Thin Conical Shells and Its Application in Mechanical Engineering [in Russian], Izd. AN USSR, Kyiv (1963).
S. G. Lekhnitskii, Theory of Elasticity of an Anisotropic Body, Mir, Moscow (1981).
A. K. Malmeister, V. P. Tamusz, and G. A. Teters, Resistance of Polymeric and Composite Materials [in Russian], Zinatne, Riga (1980).
B. L. Pelekh, Theory of Shells with Finite Shear Stiffness [in Russian], Naukova Dumka, Kyiv (1973).
Ya. M. Grigorenko, ”Nonconvential approaches to static problems for noncircular cylindrical shells in different formulations,” Int. Appl. Mech., 43, No. 1, 35–53 (2007).
Ya. M. Grigorenko and V. A. Tsybul’nik, ”Stress–strain analysis of conical shells with different boundary conditions and thickness varying in two directions at constant mass,” Int. Appl. Mech., 42, No. 3, 308–317 (2006).
Ya. M. Grigorenko, G. P. Urusova, and L. S. Rozhok, ”Stress analysis of nonthin cylindrical shells in refined and spatial formulations,” Int. Appl. Mech., 42, No. 8, 886–894 (2006).
Ya. M. Grigorenko and S. N. Yaremchenko, ”Influence of orthotropy on displacements and stresses in nonthin cylindrical shells with elliptic cross section,” Int. Appl. Mech., 43, No. 6, 654–661 (2007).
V. G. Piskunov and A. O. Rasskazov, ”Evolution of the theory of laminated plates and shells,” Int. Appl. Mech., 38, No. 2, 135–166 (2002).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 48, No. 3, pp. 117–126, May–June 2012
Rights and permissions
About this article
Cite this article
Avramenko, O.A. Stress–strain analysis of nonthin conical shells with thickness varying in two coordinate directions. Int Appl Mech 48, 332–342 (2012). https://doi.org/10.1007/s10778-012-0524-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-012-0524-z