The search for a global Pb-free replacement for Sn-Pb eutectic alloy has been an evolving process as the threat of a regional lead ban became a reality in July 2006. Over the twelve years from 1994 through 2006, the manufacturing, performance, and reliability criteria for Pb-free solder joints have become increasingly complex as relationships between the solder alloy, the circuit board materials and construction, and the component designs and materials have been revealed through widespread experimentation by companies, industrial consortia, and university researchers. The focus of this chapter is to examine the primary criteria used to develop the current generation of Pb-free solder alloys, the tradeoffs made between various properties once these primary criteria were satisfied, and the open questions regarding materials and processes that are as yet unanswered.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
NCMS Lead-Free Solder Project Final Report, NCMS, National Center for Manufacturing Sciences, 3025 Boardwalk, Ann Arbor, Michigan 48108-3266, Report 0401RE96, August 1997, and CD-ROM database of complete dataset, including micrographs and raw data, August, 1999. Information on how to order these can be obtained from: http://www.ncms.org/
I. Artaki, D. Noctor, C. Desantis, W. Desaulnier, L. Felton, M. Palmer, J. Felty, J. Greaves, C.A. Handwerker, J. Mather, S. Schroeder, D. Napp, T.Y. Pan, J. Rosser, P. Vianco, G. Whitten, and Y. Zhu. Research trends in leadfree soldering in the US: NCMS lead-free solder project (Keynote). 602-605. 1999. IEEE Computer Society. Proceedings-EcoDesign ’99: First International Symposium on Environmentally Conscious Design and Inverse Manufacturing; February 1-3, 1999; Tokyo, Japan.
C.A. Handwerker, E.E. de Kluizenaar, K. Suganuma, F.W. Gayle, Major International Lead-Free Solder Studies, Eds., Puttlitz K.J., Stalter K.A. Handbook of Lead-Free Solder Technology and Microelectronic Assemblies. New York: Marcel Dekker. In press.
C.A. Handwerker, NCMS lead-free solder project: a summary of results, conclusions and recommendations. 1999. IPC. IPC Work ’99: An International Summit on Lead-Free Electronics Assemblies; Proceedings; October 23-28, 1999; Minneapolis, MN.
F. Gayle, G. Becka, A. Syed, J. Badgett, G. Whitten, T.-Y. Pan, A. Grusd, B. Bauer, R. Lathrop, J. Slattery, I. Anderson, J. Foley, A. Gickler, D. Napp, J. Mather, C. Olson, High temperature lead-free solder for microelectronics J. Minerals, Metals & Materials Soc. 53 (6): 17-21 June 2001.
F.W. Gayle, Fatigue-Resistant, High Temperature Solder, Advanced Materials & Processes 159 (4), April 2001, p. 43-44.
F.W. Gayle, G. Becka, A. Syed, J. Badgett, G. Whitten, T.-Y. Pan, A. Grusd, B. Bauer, R. Lathrop, J. Slattery, I. Anderson, J. Foley, A. Gickler, D. Napp, J. Mather, C. Olson, High temperature lead-free solder for microelectronics, NCMS, Ann Arbor, MI, 2001 (published on CD-ROM).
J.H. Vincent, B.P. Richards, D.R. Wallis, I. Gunter, M. Warwick, H.A.H. Steen, P.G. Harris, M.A. Whitmore, S. Billington, A.C. Harman, and E. Knight, “Alternative solders for electronics assemblies. Part 2: UK progress and preliminary trials,” Circuit World, 19: pp.32-34, 1993.
Alternative Solders for Electronic Assemblies - Final Report of DTI Project 1991-1993, GEC Marconi, ITRI, BNR Europe, and Multicore Solders. DTI Report MS/20073, issued 10.26.93.
H. Vincent and G. Humpston, “Lead-free solders for electronic assembly,” GEC Journal of Research, 11: pp.76-89, 1994.
M. Harrison and J.H. Vincent, “Improved Design Life and Environmentally Aware Manufacturing of Electronic Assemblies by Lead-Free Soldering,” http://www.lead-free.org/research/index.html.
M.R. Harrison and J. Vincent, “IDEALS: Improved design life and environmentally aware manufacturing of electronics assemblies by lead-free soldering”, Proc. IMAPS Europe ’99, (Harrogate, GB), June 1999.
C.A. Handwerker, F.W. Gayle, E. de Kluizenar, K. Suganama, Major International Lead (Pb)- Free Solder Studies, in Handbook of Lead-free Solder Technology for Microelectronics Assemblies, Eds. K.J. Puttlitz and K.A. Stalter, Marcel Dekker, 2004.
M.H. Biglari, M. Oddy, M.A. Oud, P. Davis, E.E. de Kluizenaar, P. Langeveld, and D. Schwarzbach, “Pb-free solders based on SnAgCu, SnAgBi, SnAg, and SnCu, for wave soldering of electronic assemblies,” Proc. Electronics Goes Green 2000+, (Berlin, Germany) September 2000.
J. Bath, C.A. Handwerker, E. Bradley, Research Update: Lead-Free Solder Alternatives, Circuits Assembly, May 2000, 31-40.
E. Bradley, NEMI Pb-free interconnect task group report. 1999. IPC Works ’99: An International Summit on Lead-Free Electronics Assemblies; Proceedings; October 23-28, 1999; Minneapolis, MN.
A. Rae and C.A. Handwerker, Circuits Assembly, April 2004, 20-25.
E. Bradley, J. Bath, C.A. Handwerker, R.D. Parker, Lead-Free Electronics: iNEMI Projects Lead to Successful Manufacturing, 2007, in press.
K. Suganuma, Research and development for lead-free soldering in Japan. 1999. IPC. IPC Work ’99: An International Summit on Lead-Free Electronics Assemblies; Proceedings; October 23-28, 1999; Minneapolis, MN.
JEITA Lead-free Roadmap 2002 for Commercialization of Lead-free Solder, September 2002, Lead-Free Soldering Roadmap Committee, Technical Standardization Committee on Electronics Assembly Technology, JEITA (Japan Electronics and Information Technology Industries Association).
NEDO Research and Development on Lead-Free Soldering, Report No.00-ki-17, JEIDA, Tokyo, Japan, 2000.
Lead-Free Soldering - An Analysis of the Current Status of Lead-Free Soldering, Report from the UK Department of Trade and Industry. Copies can be obtained from the ITRI website: http://www.lead-free.org/
Second European Lead-Free Soldering Technology Roadmap, February 2003 and Framework for an International Lead-Free Soldering Roadmap, December 2002, Soldertec, available at http://www.lead-free.org.
ASM Binary Alloy Phase Diagrams, Eds. T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak, ASM International, 1990.
U.R. Kattner, Phase diagrams for lead-free solder alloys, JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 54 (12): 45-51, 2002.
U.R. Kattner, C.A. Handwerker. Calculation of phase equilibria in candidate solder alloys. Zeitschrift fur Metallkunde 2001; 92(7): 740-746.
K.W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, C.A. Hand-werker. Experimental and thermodynamic assessment of Sn-Ag-Cu solder alloys. Journal of Electronic Materials 2000; 29(10): 1122-1136.
U.R. Kattner and W.J. Boettinger, “On the Sn-Bi-Ag ternary phase-diagram,” Journal of Electronic Materials 23 (1994) 603-10.
K.W. Moon, W.J. Boettinger, U.R. Kattner, C.A. Handwerker, D.J. Lee, The effect of Pb contamination on the solidification behavior of Sn-Bi solders, J Elec. Mater. 30 (1): 45-52 (2001).
S. Chada, W. Laub, R.A. Fournelle, and D. Shangguan, Copper substrate dissolution in eutectic Sn-Ag Solder and its Effect on Microstructure, J. Electronic Mater. 29, 1214-1221 (2000).
T.M. Korhonen, P. Su, S.J. Hong, M.A. Korhonen, and C.-Y. Li, Reactions of Lead-Free Solders with CuNi Metallizations, J. Electronic Mater. 29 1194-1199 (2000).
D. Swenson, The effects of suppressed beta tin nucleation on the microstructural evolution of lead-free solder joints, J. Mater. Sci. Mater. Electronics, 18 39-54 (2007).
J.W. Jang and D. Frear, unpublished research.
JCAA/JG-PP No-Lead Solder Project: -55°C to +125°C Thermal Cycle Testing Final Project, Rockwell Collins, D. Hillman and R. Wilcoxon, May 28, 2006.
K.S. Kim, S.H. Huh, and K. Suganuma, Effects of cooling speed on microstructure and tensile properties of Sn-Ag-Cu alloys, Mater. Sci. Eng. A. 333 106-114 (2002).
D.W. Henderson, T. Gosselin, A. Sarkhel, S.K. Kang, W.K. Choi, D.Y. Shih, C. Goldsmith, and K.J. Puttlitz, Ag3Sn plate formation in the solidification of near ternary eutectic Sn-Ag-Cu alloys, J. Mater. Res., 17 2775-2778 (2002).
I.E. Anderson, J.C. Foley, B.A. Cook, J. Harringa, R.L. Terpstra, O. Unal, Alloying effects in near-eutectic Sn-Ag-Cu solder alloys for improved microstructural stability, J. Electron. Mater. 30 (9): 1050-1059 (2001).
I.E. Anderson, B.A. Cook, J. Harringa, R.L. Terpstra, Microstructural modifications and properties of Sn-Ag-Cu solder joints induced by alloying, J. Electron.Mater. 31, 1166-1174 (2002).
K.L. Buckmaster, J.J. Dziedzic, M.A. Masters, B.D. Poquette, G.W. Tormoen, D. Swenson, D.W. Henderson, T. Gosselin, S.K. Kang, D.Y. Shih and K.J. Put-tlitz, Presented at the TMS 2003 Fall Meeting, Chicago, IL, November, 2003.
M.A. Dudek, R.S. Sidhu, and N. Chawla, Novel rare-earth-containing lead-free solders with enhanced ductility, J. Metals 58 (6) 57-62 (2006).
K. Suganuma, Microstructural features of lift-off phenomenon in through hole circuit soldered by Sn-Bi. Scripta Materialia 1998; 38(9):1333-1340.
W.J. Boettinger, C.A. Handwerker, B. Newbury, T.Y. Pan, J.M. Nicholson, Mechanism of fillet lifting in Sn-Bi alloys, J. Elec. Mater., 31 (5): 545-550 MAY 2002.
H. Takao, H. Hasegawa, Influence of alloy composition on fillet-lifting phenomenon in Sn-Ag-Bi alloys, J. Elec. Mater., 30(2001), 513-520.
P. Biocca, Solder Paste: What are the process requirements to achieve reliable lead-free wave soldering?, http://www.leadfreemagazine.com/pages/papers/Q_A_Kester.pdf.
P. Biocca, Reliable Lead-Free Wave Soldering and SMT Processes, http://ap.pennnet.com/Articles/Article_Display.cfm?Section=Articles&Subsection= Display&ARTICLE_ID=216210.
K.-W. Moon, U.R. Kattner, and C.A. Handwerker, The Effect of Bi Contamination on the Solidification Behavior of Sn-Pb Solder, J. Elec. Mater. Nov. 2006.
NIST Thermodynamic Database for Solder Alloys, http://www.metallurgy.nist. gov/phase/solder/
J.-O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman, Thermo-Calc and DICTRA, Computational Tool for Materials Science, Calphad 26 (2002) 273-312.
W.J. Boettinger, U.R. Kattner, S.R. Coriell, Y.A. Chang and B.A. Mueller, A Development of Multicomponent Solidification Micromodels Using a Thermodynamic Phase Diagram Data Base, in Modeling of Casting, Welding and Advanced Solidification Processes, VII, Eds. M. Cross and J. Campbell, TMS, Warrendale, PA, 1995, 649-656.
D.W.G. White, Surface tensions of Pb, Sn, and Pb-Sn alloys, Metallurgical Transactions, 2 (1971) 3067-3071.
I. Ohnuma, X.J. Liu, H. Ohtani, K. Anzai, R. Kainuma, K. Ishida, Development of thermodynamic database for micro-soldering alloys, Electronics Packaging Technology Conference, 2000. (EPTC 2000). Proceedings of 3rd Conference, 2000, 91-96.
I. Ohnuma, M. Miyashita, K. Anzai, X.J. Liu, H. Ohtani, R. Kainuma, Phase equilibria and the related properties of Sn-Ag-Cu based Pb-free solder alloys. J. Elec. Mater. 2000; 29(10): 1137-1144.
N.-C. Lee. Prospect of lead-free alternatives for reflow soldering. 1999. ICP. IPC Work ’99: An International Summit on Lead-Free Electronics Assemblies; Proceedings; October 23-28, 1999; Minneapolis, MN.
E. Bradley and J. Hranisavljevic, ECTC, 50th Electronic Components & Technology Conference, IEEE Transactions on Electronics Packaging Manufacturing 24:4 (10/2001) 255-260.
J.P. Clech, Report to NIST on Review and Analysis of Lead-Free Solder Ma- terial Properties, 2002, http://www.metallurgy.nist.gov/solder/clech/Introduction.htm.
M. Kerr and N. Chawla, Creep deformation behavior of Sn-3.5Ag solder/Cu couple at small length scales, Acta Mater. 52 4527-4535 (2004).
X. Deng, N. Chawla, K.K. Chawla, and M. Koopman, Deformation behavior of (Cu,Ag)-Sn intermetallics by nanoindentation, Acta. Mater. 52 4291-4303 (2004).
F. Ochoa, X. Deng, and N. Chawla, Effects of cooling rate on creep behavior of a Sn-3.5Ag alloy, J. Electron. Mater. 33 1596-1607 (2004).
Personal Communication D. Frear and E. Bradley (2000).
F. Guo, S. Choi, K.N. Subramanian, T.R. Bieler, J.P. Lucas, A. Achari, M. Paruchuri, Evaluation of creep behavior of near-eutectic Sn-Ag solders containing small amounts of alloy additions, Mater. Sci. Eng. A 35: 190-199 (2003).
R. Darveaux and K. Banerji, IEEE Trans. Components, Hybrid and Manufacturing Technology 15 1013-1024 (1992).
J. Bartelo, S.R. Cain, D. Caletka, K. Darbha, T. Gosselin, D.W. Henderson, D. King, K. Knadle, A. Sarkhel, G. Thiel, C. Woychik, “Thermomechanical fatigue behavior of selected lead-free solders”, Proceedings, IPC SMEMA Council APEX 2001, Paper # LF2-2.
G. Swan, A. Woosley, K. Simmons, T. Koschmieder, T.T. Chong, and L. Matsushita. Development of lead-(Pb) and halogen free peripheral leaded and PBGA components to meet MSL3 at 260°C peak reflow profile. 1, 121-126. 9-11-2000. VDE Verlag. Proceedings, Electronics Goes Green 2000+, September 11-13, 2000, Berlin, Germany.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2007 Springer Science+Business Media, LLC
About this chapter
Cite this chapter
Handwerker, C., Kattner, U., Moon, KW. (2007). Fundamental Properties of Pb-Free Solder Alloys. In: Bath, J. (eds) Lead-Free Soldering. Springer, Boston, MA. https://doi.org/10.1007/978-0-387-68422-2_2
Download citation
DOI: https://doi.org/10.1007/978-0-387-68422-2_2
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-387-32466-1
Online ISBN: 978-0-387-68422-2
eBook Packages: EngineeringEngineering (R0)