Abstract
In this study, indigo-dyed denim fabric was decolorized via separate and simultaneous applying of laccase, sodium hydrosulfite, and cellulase. In this regard, the surface reflectance and color coordinates of the discolored fabrics were evaluated and scanning electron microscopy (SEM) images of the cellulase treated fabric were prepared to analyze their surfaces. Finally, the characterization of the treated samples was investigated, including moisture content, crease recovery angle, air permeability, and abrasion resistance. The color experiments showed that simultaneous applying of laccase, sodium hydrosulfite, and cellulose had a 55.79% improvement in the samples’ lightness (L*). Furthermore, the color coordinate test of specimens revealed that the hue of the treated samples was changed to blue and green, and the purity of color (C*) was modified. The increment in the moisture content and air permeability of the treated specimens indicated that the comfort of the jeans clothing had been enhanced. As a result, sodium hydrosulfite demonstrates a high-efficiency denim discoloration in the laccase-mediated system.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Nowadays, jeans are an important part of the fashion industry due to their adaptability to social and cultural changes. The demand for distressed jeans has created a great change in finishing these clothes [1]. Jeans have many fans from all age groups and have a steady growth rate in the global market [2]. The global consumption of denim in 2014 was about 4.500 million meters per year and its demand increases by 5% annually [3]. This type of garment has various applications like pants, uniforms, and casual clothing [4]. Jean fabrics are called Indigo-dyed denim with a strong, thick, and rough surface and its common weave structure is 2/1 twill. Denim fabrics are fabricated from thick cotton yarns; However, many different varieties are available in the market nowadays [5, 6]. One of the main features of this fabric is that the warp yarns are blue while the weft yarns are not [7, 8]. The warp yarn is traditionally dyed with indigo dye, although other vat dyes or sulfur dyes are used as well. The vat dyes (including indigo dyes) become soluble via alkaline reduction, penetrate into the fabrics, and then become insoluble through oxidation resulting in the physical trapping of dyes into the fabric. In indigo dyeing process, ring dying occurs which means the outer surface of the fibers is intentionally indigo dyed, while the inner core remains white [9, 10].
Discoloration is performed as an important finishing treatment to achieve an aged appearance on denim by abrading or surface treating, in which the dye is removed from the outer surface of the fabric [11,12,13]. Stone washing is one of the first mechanical finishing treatment used for denim discoloration by applying pumice stones. This method produces the desired aged appearance, but at the same time reduces the resilience and strength of the fabric remarkably and damages the equipment and facilities [14, 15].
Oxidizing agents including sodium hypochlorite, potassium permanganate, nano materials with oxidative activity such as silver nanoparticles, and ozone are commonly used for denim discoloration [14]. Advanced oxidation process such as the combination of oxidizing agents and irradiation has been used in previous research [14]. However, oxidizing agents can cause undesirable adverse chemical effects, i.e., yellowness, tensile strength reduction, and fabric degradation [15, 16].
Discoloration has also been studied using plasma or laser irradiation [6, 14, 17,18,19]. While they provide good discoloration result and could provide special patterned discoloration, they need expensive technological equipment to perform plasma and laser irradiation for denim discoloration.
Enzymes are environmentally friendly biocatalysts that have been used for discoloration of denim fabrics. On the other hand, enzyme treatment applies only on the surface of the fabrics which cannot cause an extensive degradation of denim fabrics, unlike oxidative materials or mechanical stone washing. Enzyme treatment process also does not require special equipment, which makes them easy to use compared to plasma and laser irradiation techniques [20,21,22,23,24,25]. Cellulase and laccase are two typical enzymes used for this purpose [10, 26,27,28,29,30]. Cellulase enzymes degrade the surface piles and fibers on the outer layer of the fabric resulting in the discoloration. This process simultaneously improves the hand and flexibility of denim fabric [23, 31,32,33,34,35,36].
Laccases (benzenediol; oxygen oxidoreductases, EC1.10.3.2) are polyphenol oxidizers with multi-cuppers that catalyze the oxidation of a wide range of organic and inorganic substrates by an oxygen as an electron acceptor [37,38,39]. Therefore, discoloration by laccase enzyme occurs by degradation of indigo dye molecules through oxidation-reduction mechanism (Fig. 1) [20].
It can be said that cellulase produces an aged appearance by abrasion, while laccase produces a lighter shade by degrading the indigo dye molecules and also reduces the back staining caused by the cellulase treatments [20, 40, 41].
However, laccase enzyme could not metabolize nonphenolic parts of the aromatic compound, because of its low redox potentiality. Furthermore, laccase cannot degrade dyes without any other chemicals in high efficiency. Researchers have developed small organic compounds called mediators that have high redox potential and can be oxidized and activated by laccase. To date, several mediators including 2,2′-azine-bis (3-ethylbenzothiazoline-6-sulfonic acid (ABTS)) and 2,2,6,6-tetramethyl-1-piperidinyloxyl (TMPO) have been introduced to degrade organic and nonorganic nonphenolic compounds and dye by laccase. The mediators have been commonly expensive materials which are not easily accessible in some cases [16, 42,43,44].
In the present study, the sodium hydrosulfite was considered as a possible and easily accessible laccase-mediated system to achieve high-efficiency denim discoloration. The usage of this compound as a mediator was not reported so far. Also, the discoloration result, color, and fabric characterization were investigated in combination with the cellulase enzyme.
Experimental
Materials
Jean fabrics were woven as a 2×1 twill (surface density=358 g/cm2). Laccase enzyme (Setenzim Eco-L 30), neutral cellulase enzyme (Dsn 205-G), and acrylic thickener (Setaprint RST) were purchased from Setas Company. Sodium hydrosulfite was obtained from AZ Chemicals Inc. Disodium hydrogen phosphate (Na2HPO4) and citric acid (C6H8O7) (99%) were bought from Sigma-Aldrich. Also, nonionic detergent was supplied by Saveh Resin Co.
Methods
Discoloration of Denim Fabrics
The laccase buffer solution (pH=5) was prepared according to the previous research [45]. For preparing 20 mL buffer solution, 10.30 mL Na2HPO4 (0.2M) was added to 9.70 mL C6H8O7. Also, 12.63 mL Na2HPO4 solution (0.2M) was added to 7.37 mL C6H8O7 to prepare the mixture of laccase and cellulase buffer solution (pH=6) [45].
In this research, jeans’ fabric was decolorized by washing method (S1). Also, the effect of laccase as well as laccase and cellulase were investigated on the discoloration of jean fabrics via using sodium hydrosulfite as a mediator. For this purpose, jeans’ fabrics were placed in baths and then put in a chamber for 1 h. The bath temperatures during and after treatment were 65°C and 50°C for the laccase and the mixture of laccase and cellulase, respectively. Afterward, jean fabrics were placed in boiling deionized water to deactivate enzymes and washed with non-ionic detergent. The compositions of washing solution are given in Table 1 (Sh, sodium hydrosulfite; L, laccase; L Sh, laccase and sodium hydrosulfite; L C, laccase and cellulase; L C Sh, laccase and cellulase and sodium hydrosulfite).
Characterization
Color measurements were performed utilizing a reflective spectrophotometer (Texflash Data Color, Switzerland). Equation 1 was used to quantify the color difference (\(\Delta {\mathrm{E}}_{\mathrm{ab}}^{\ast }\)) in the CIELAB color space of untreated and treated fabric through.
The surface morphology of the specimens was evaluated through using scanning electron microscopy (SEM, EM3200 KYKY, China) and the images were presented with magnification of 2500×. For this purpose, the fabrics were first coated with a thin layer of gold using gold sputter coater (SBC-12, KYKY, China).
The moisture content of samples was calculated from Equation 2 according to ASTM D2654-1976.
while M2 is the fabrics’ weight after presence at the conditioning room and M1 is the fabrics’ weight after complete drying.
Air permeability was performed according to ASTM D737-96 using air permeability tester (SDL-Mo 21S, Shirley, England).
Crease recovery angle apparatus (model of 150, James H. Heal & Co. Ltd, England) was used to evaluate the fabrics’ wrinkle resistance according to AATCC 66-2003.
Nu-Martindale abrasion and pilling tester (model of 404, James H. Heal & Co. Ltd, England) was utilized to measure abrasion fastness according to ASTM D 4158–01.
Result and Discussion
Enzyme processing is one of the promising approaches to replace conventional textile treatments. Laccases are oxidoreductase that are able to decolorize industrial dyes. However, some dyes’ molecules are too large to enter the enzyme active site. Therefore, laccase mediators have been extended to enhance the process. On the other hand, cellulase is another sustainable option to denim treatment by acting on the surface of the fabric. In this research, denim samples were treated using laccase, laccase plus mediator, and laccase plus mediator plus cellulase, and the results were investigated.
Appearance and Color Changes of the Treated Samples
The reflective curve indicates the lightness or darkness percentage of the sample surface. As was shown in the reflectance curves (Fig. 2), a remarkable increment was seen in the lightness of samples treated with the mixture of cellulase and laccase and sodium hydrosulfite which was remarkable compared to the lightness of samples treated with laccase [16], immobilized cellulase [36], the mixture of cellulase and laccase [40], and nanomaterials [46] such as nano silver [47] as well as nano clay [22]. Also, samples treated with enzymes and sodium hydrosulfite have provided desired shade due to their ability to discolor the surface of the denim fabric.
To gain a better understanding of the color changes in the treated samples, color coordinates in CIELAB color space were obtained (Table 2). The results presented in Fig. 3 and Table 2 show the improvement in the lightness of the specimens ranging from 0.40 to 27.42. The simultaneous using of laccase and sodium hydrosulfite resulted in a significant synergistic effect increase in the lightness, while the addition of cellulase has slightly enhanced the synergistic effect of the treated specimens. Researchers reported that the significant enhancement in the lightness of samples had been seen via utilization of KMnO4 [48], advanced oxidation procedures [49], and ozone treatment [50] with the highest intensity resulting in extensive degradation of cellulosic fibers due to their high oxidative function. Also, in the previous studies, the increase in lightness was observed after four times treating [33]; while in the present study, the lightness enhancement was observed after only one treatment which is one of the most remarkable achievements of this research.
The addition of the cellulase enzyme for jeans discoloration had no effect in the present study. The indigo dye molecules were released by degradation of the fibers’ surface via cellulase enzyme [40]. On the other hand, the laccase enzyme destroyed the indigo dye molecules [51]. It can be assumed that sodium hydrosulfite has a synergistic effect in the presence of the two enzymes (S2).
Fig. 4 shows the improvement of the specimens’ lightness. In addition, the discoloration process changed the samples’ hue (Table 2) which is shown in the a*b* diagram (Fig. 5). As shown, the transition from redness to greenness was important and the greenness of the treated specimens has been increased. The blueness also improved in all treated specimens. The improvement in blueness appears to have been noticeable in the treated specimens. Finally, color differences (ΔE*ab) in CIELAB color-space were determined to investigate the color changes of the treated specimens compared to the untreated specimens (Fig. 6). The color differences were evident in all specimens (ΔE*ab>3). Moreover, the greatest color differences were associated with the improved lightness and blueness of the treated specimens.
Surface Morphology Evaluation
According to the literature, laccase as an oxidative enzyme affects the dye molecule to treat wastewater from dyeing process while cellulase treatment changes the surface characteristic of the cotton fabric by hydrolysis of cellulose at the end or in the middle of the cellulose chain and yields a shorter polymer chain. Therefore, morphology of cellulase treated and untreated samples was investigated by SEM (Fig. 7). A comparison between Fig. 7a with b and c showed the formation of anchor fibers due to the surface destruction of the fibers [40].
On the other hand, the existence of sodium hydrosulfite reduces the destructive effect of the cellulase enzyme due to its reduction effect [52]. As enzymes are highly sensitive to pH, it seems that the reducing effect of sodium hydrosulfite changes the pH of the solution and leads to decreasing the cellulase function. Therefore, the degradation of the specimens treated with two enzymes along with sodium hydrosulfite was lower than the specimens treated with laccase and cellulase enzymes (comparing Fig. 7b and c).
Moisture Content Evaluation
As illustrated in Table 3, a significant increase was seen in the moisture content of the samples treated with cellulase individually and the mixture of laccase and cellulase with sodium hydrosulfite due to the formation of hydroxyl groups at both ends of the polymeric chain as a result of the enzymatic hydrolysis. Same results have been reported in previous studies [34, 35]. Compared to the previous research, performing the advanced oxidation process (AOP) did not result in any significant changes in the water absorption capacity and water retention properties of the denim fabric; hence, an immense destructive process happens [49]. Due to the reducing effect of sodium hydrosulfite, it can partially prevent the oxidation of cellulose [52]. It can be concluded that the combination of sodium hydrosulfite and cellulase enzyme reduces the destructive effect of the enzyme as shown in Fig. 7b and c.
Crease Recovery Angle Evaluation
According to the results presented in Table 3, sodium hydrosulfite increased the wrinkle resistance of the fabric. Specimens treated with cellulase enzyme demonstrated a significant decrease in the crease recovery angle due to the surface degradation of the cellulosic fibers. According to other literature, using other materials such as oxidizing agents leads to decreasing the wrinkling and stiffness of cotton fabrics indicating further destruction of the fiber structure [1, 49].
Also, the higher wrinkle resistance of the specimens treated with two enzymes and sodium hydrosulfite compared to the specimens treated with two enzymes confirmed that sodium hydrosulfite reduces the destructive effect of the cellulase enzyme due to its reduction function. In the previous research, the numerical values of the crease recovery angle increased for cellulase treated, two enzymes treated, laccase treated, and untreated specimens, respectively [53]. The reason for the increase in wrinkle resistance of the specimens treated with the two enzymes compared to the specimens treated with cellulase is that the enzyme has a large molecule and its function is limited to the fabric surface. Therefore, the existence of both enzymes in the same bath led to decreasing available surface for cellulase hydrolysis action.
Air Permeability Evaluation
The air permeability of the specimens treated with laccase and cellulase as well as the mixture of enzymes with sodium hydrosulfite are presented in Table 3. As cellulase can remove the pills of cotton fabrics and changes their mechanical properties, a higher amount of the air permeability was observed in the washed specimens [54]. In the previous study [1], it was shown that the air permeability of denim fabric decreased with time after treating with calcium hypochlorite due to the excessive damage, which leads to the formation of anchor fibers on the fabrics’ surface [49]. In the present study, the less decrease of the air permeability of the enzyme treated fabrics indicated the less degradation effect of the enzyme (Fig. 7). However, the lower air permeability in the specimens treated with two enzymes might be due to the fewer degradation on the fabric surface (Fig. 7b and c). Therefore, the air permeability and moisture content improve the comfort of the fabric after the discoloration process.
Abrasion Fastness Evaluation
Table 4 shows the results of the abrasion fastness test of the specimens. It can be said that the washing method produced anchor fibers and fuzzy fibers and pills due to the surface degradation caused by the cellulase enzyme [32, 40]. It was reported that the surface area of the fabric was increased by cellulase enzyme through mechanical treatments [54]. The specimens treated with two enzymes and sodium hydrosulfite showed lower abrasion fastness due to the destructive effect of the cellulase enzyme on the cellulose fibers (Fig. 7). Also, the abrasion fastness is higher for samples treated with two enzymes and sodium hydrosulfite compared to the specimens treated with the two enzymes. The reason for the mentioned mechanism is decreasing the destructive effect of the cellulase enzyme with sodium hydrosulfite due to its reduction effect [52].
Conclusion
In the present study, the denim discoloration was performed via separate and simultaneous applying of laccase, sodium hydrosulfite, and cellulase. The investigation of color index indicated that the lightness was improved for the samples treated with laccase and sodium hydrosulfite. Also, the significant enhancement was observed in the blueness and greenness of the treated samples. Furthermore, the increment in moisture content and air permeability represents the improvement in the comfort of the treated samples. Our results demonstrate the potential usage of sodium hydrosulfite as a mediator in laccase-mediated system to achieve high-efficiency denim discoloration.
References
Haq, U. N., Khan, M. M. R., & Khan, M. M. R. (2015). Investigation of the bulk, surface and transfer properties of chlorine bleached denim apparel at different condition. European Scientific Journal, 11(12).
Athey, S. N., Adams, J. K., Erdle, L. M., Jantunen, L. M., Helm, P. A., Finkelstein, S. A., & Diamond, M. L. (2020). The widespread environmental footprint of indigo denim microfibers from blue jeans. Environmental Science & Technology Letters, 7, 840–847.
Mohibullah, A. T. M., Takebira, U. M., Alam, M. S., Hossain, M. Z., Chakraborty, T., & Chowdhury, M. R. A. (2021). Washing impacts on jeans costing. International Journal of Advanced Research in Engineering and Technology, 12(12), 33–44.
Eid, B. M., & Ibrahim, N. A. (2021). Recent developments in sustainable finishing of cellulosic textiles employing biotechnology. Journal of Cleaner Production, 284, 124701.
Kamppuri, T., & Mahmood, S. (2019). Finishing of denim fabrics with ozone in water. Journal of Textile Engineering & Fashion Technology, 5, 96–101.
Venkatraman, P. D., & Liauw, C. M. (2019). Use of a carbon dioxide laser for environmentally beneficial generation of distressed/faded effects on indigo dyed denim fabric: Evaluation of colour change, fibre morphology, degradation and textile properties. Optics & Laser Technology, 111, 701–713.
Katode, S., Maiti, S., Biranje, S., & Adivarekar, R. V. (2018). Study of decolouration effect on denim by ceric sulphate treatment using statistical modeling. Trends in Textile Engineering and Fashion Technology, 4, 1–6.
Ke, W., Xu, J., Yang, M., & Yi, C. (2019). Surrogate-Based Modeling and Optimization of the Bleach Washing for Denim Fabrics. In: Wong, W. (ed) Artificial Intelligence on Fashion and Textiles. AITA 2018. Advances in Intelligent Systems and Computing, 849. Springer, Cham.
Hoque, M. S., Rashid, M. A., Chowdhury, S., Chakraborty, A., & Haque, A. N. M. A. (2018). Alternative washing of cotton denim fabrics by natural agents. American Journal of Environmental Protection, 7, 79–83.
Xu, J., He, Z., Li, S., & Ke, W. (2020). Production cost optimization of enzyme washing for indigo dyed cotton denim by combining Kriging surrogate with differential evolution algorithm. Textile Research Journal, 90, 1860–1871.
Choi, K.-Y. (2020). Discoloration of indigo dyes by eco-friendly biocatalysts. Dyes and Pigments, 184, 108749.
Du, W., Zuo, D., Gan, H., & Yi, C. (2019). Comparative study on the effects of laser bleaching and conventional bleaching on the physical properties of indigo kapok/cotton denim fabrics. Applied Sciences, 9, 4662.
He, Z., Li, M., Zuo, D., & Yi, C. (2018). The effect of denim color fading ozonation on yarns. Ozone: Science & Engineering, 40, 377–384.
Dalbaşı, E. S., & İlleez, A. A. (2019). A research on the effect of various laser fading parameters on physical and surface properties of denim fabric. Optics & Laser Technology, 118, 28–36.
Eryuruk, S. H. (2019). The effects of elastane and finishing processes on the performance properties of denim fabrics. International Journal of Clothing Science and Technology, 31, (2), 243-258.
Iracheta-Cárdenas, M. M., Rocha-Peña, M. A., Galán-Wong, L. J., Arévalo-Niño, K., & Tovar-Herrera, O. E. (2016). A Pycnoporus sanguineus laccase for denim bleaching and its comparison with an enzymatic commercial formulation. Journal of Environmental Management, 177, 93–100.
Kulyk, I., Dalla Pria, C., & Dughiero, F. (2020). Colour fading of denim with atmospheric pressure plasma jet using air. International Journal of Applied Electromagnetics and Mechanics, 63(S1), S79-S84.
Tudoran, C., Roşu, M. C., & Coroş, M. (2020). A concise overview on plasma treatment for application on textile and leather materials. Plasma Processes and Polymers, 17, 2000046.
Escobedo, P., de Pablos-Florido, J., Carvajal, M. A., Martínez-Olmos, A., Capitán-Vallvey, L. F., & Palma, A. J. (2020). The effect of bending on laser-cut electro-textile inductors and capacitors attached on denim as wearable structures. Textile Research Journal, 90, 2355–2366.
Pazarlıoǧlu, N. K., Sariişik, M., & Telefoncu, A. (2005). Laccase: Production by Trametes versicolor and application to denim washing. Process Biochemistry, 40, 1673–1678.
Pan, K., Zhao, N., Yin, Q., Zhang, T., Xu, X., Fang, W., Hong, Y., Fang, Z., & Xiao, Y. (2014). Induction of a laccase Lcc9 from Coprinopsis cinerea by fungal coculture and its application on indigo dye decolorization. Bioresource Technology, 162, 45–52.
Maryan, A. S., Montazer, M., Harifi, T., & Rad, M. M. (2013). Aged-look vat dyed cotton with anti-bacterial/anti-fungal properties by treatment with nano clay and enzymes. Carbohydrate Polymers, 95, 338–347.
Zilz, L., Rau, M., Budag, N., Scharf, M., Cavaco-Paulo, A., & Andreaus, J. (2013). Nonionic surfactants and dispersants for biopolishing and stonewashing with Hypocrea jecorina cellulases. Coloration Technology, 129, 49–54.
Haggag, K., Ragheb, A., Abd El-Thalouth, I., Nassar, S., & El-Sayed, H. (2013). A review article on enzymes and their role in resist and discharge printing styles. Life Science Journal, 10, 1646–1654.
Belghith, H., Ellouz-Chaabouni, S., & Gargouri, A. (2001). Biostoning of denims by Penicillium occitanis (Pol6) cellulases. Journal of Biotechnology, 89, 257–262.
Bussler, L., Jacomini, D., Correa, J. M., Kadowaki, M. K., Maller, A., Simão, R., & d. C. G. (2021). Recombinant cellulase of Caulobacter crescentus: potential applications for biofuels and textile industries. Cellulose, 28, 2813–2832.
Sankarraj, N., & Nallathambi, G. (2018). Enzymatic biopolishing of cotton fabric with free/immobilized cellulase. Carbohydrate Polymers, 191, 95–102.
Hasan, M. Z., Asif, A., Rahaman, M. T., & Akter, S. (2021). Effect of super white washing process temperature and optical brightening agent concentration on various properties of stretch denim fabric. International Journal of Systems Engineering, 5, 43–50.
Shamim, S. I., Khan, M. I., Hossan, S., & Uddin, M. R. (2020). Study on comparison between enzyme wash and bleach wash (traditional vs. sustainable washing machine) the physical and color fastness to rubbing properties of denim garments. Journal of Textile Science and Technology, 6, 123–129.
Unuofin, J. O. (2020). Sustainability potentials of novel laccase tinctures from Stenotrophomonas maltophilia BIJ16 and Bordetella bronchiseptica HSO16: From dye decolourization to denim bioscouring. Biotechnology Reports, 25, e00409.
Kan, C. W. (2014). Effect of enzyme washing on the tensile property of denim fabric. Advanced Materials Research, 933, 175–178.
Andreaus, J., Olekszyszen, D. N. & Silveria, M. (2014). Processing of cellulosic textile materials with cellulases. Cellulose and other naturally occurring polymers, 11-19.
Sohail, M. S. (2011). Enzyme Facilitated Design on Denim. Chicago.
Mondal, M. I. H., & Khan, M. M. R. (2014). Characterization and process optimization of indigo dyed cotton denim garments by enzymatic wash. Fashion and Textiles, 1, 1–12.
Khan, M. M. R., Mondal, M. I. H., & Uddin, M. Z. (2012). Sustainable washing for denim garments by enzymatic treatment. Journal of Chemical Engineering, 27, 27–31.
Pazarlioğlu, N. K., Sariişik, M., & Telefoncu, A. (2005). Treating denim fabrics with immobilized commercial cellulases. Process Biochemistry, 40, 767–771.
Cho, E.-A., Seo, J., Lee, D.-W., & Pan, J.-G. (2011). Decolorization of indigo carmine by laccase displayed on Bacillus subtilis spores. Enzyme and Microbial Technology, 49, 100–104.
Liu, Y., Yan, M., Geng, Y., & Huang, J. (2015). ABTS-modified silica nanoparticles as laccase mediators for decolorization of indigo carmine dye. Journal of Chemistry, 2015, 670194.
Asgher, M., Kamal, S., & Iqbal, H. M. N. (2012). Improvement of catalytic efficiency, thermo-stability and dye decolorization capability of pleurotus ostreatusIBL-02 laccase by hydrophobic sol gel entrapment. Chemistry Central Journal, 6, 1–10.
Maryan, A. S., & Montazer, M. (2013). A cleaner production of denim garment using one step treatment with amylase/cellulase/laccase. Journal of Cleaner Production, 57, 320–326.
Montazer, M., & Maryan, A. S. (2008). Application of laccases with cellulases on denim for clean effluent and repeatable biowashing. Journal of Applied Polymer Science, 110, 3121–3129.
Shankar, S., & Nill, S. (2015). Effect of metal ions and redox mediators on decolorization of synthetic dyes by crude laccase from a novel white rot fungus Peniophora sp.(NFCCI-2131). Applied Biochemistry and Biotechnology, 175, 635–647.
Ancona-Escalante, W., Tapia-Tussell, R., Pool-Yam, L., Can-Cauich, A., Lizama-Uc, G., & Solís-Pereira, S. (2018). Laccase-mediator system produced by Trametes hirsuta Bm-2 on lignocellulosic substrate improves dye decolorization. 3 Biotech, 8, 1–8.
Morozova, O., Shumakovich, G., Shleev, S., & Yaropolov, Y. I. (2007). Laccase-mediator systems and their applications: A review. Applied Biochemistry and Microbiology, 43, 523–535.
McIlvaine, T. (1921). A buffer solution for colorimetric comparison. Journal of Biological Chemistry, 49, 183–186.
Maryan, A. S., Montazer, M., & Damerchely, R. (2015). Discoloration of denim garment with color free effluent using montmorillonite based nano clay and enzymes: nano bio-treatment on denim garment. Journal of Cleaner Production, 91, 208–215.
Maryan, A. S., Montazer, M., & Harifi, T. (2013). One step synthesis of silver nanoparticles and discoloration of blue cotton denim garment in alkali media. Journal of Polymer Research, 20, 1–10.
Yao, J. M., Wei, S. N. (2013) Effects of potassium permanganate decoloration on denim shade. Advanced Materials Research, 627, 190–194.
Ebrahimi, I., Gashti, M. P., & Sarafpour, M. (2018). Photocatalytic discoloration of denim using advanced oxidation process with H2O2/UV. Journal of Photochemistry and Photobiology A: Chemistry, 360, 278–288.
Ben Hmida, S., & Ladhari, N. (2016). Study of parameters affecting dry and wet ozone bleaching of denim fabric. Ozone: Science & Engineering, 38, 175–180.
Campos, R., Kandelbauer, A., Robra, K. H., Cavaco-Paulo, A., & Gübitz, G. M. (2001). Indigo degradation with purified laccases from Trametes hirsuta and Sclerotium rolfsii. Journal of Biotechnology, 89, 131–139.
Montazer, M., & Sadighi, A. (2006). Optimization of the hot alkali treatment of polyester/cotton fabric with sodium hydrosulfite. Journal of Applied Polymer Science, 100, 5049–5055.
Montazer, M., & Sadeghian Maryan, A. (2010). Influences of different enzymatic treatment on denim garment. Applied Biochemistry and Biotechnology, 160, 2114–2128.
Kan, C. W., Yuen, C., & Wong, W. (2011). Optimizing color fading effect of cotton denim fabric by enzyme treatment. Journal of Applied Polymer Science, 120, 3596–3603.
Funding
This work was supported by the Research Grant. The authors are thankful for the funds of the Isfahan University of Technology (IUT).
Author information
Authors and Affiliations
Contributions
M.S. and F.A. conceptualized the research topic and prepared the research. M.S. did the main part of the experiments in IUT, and was supervised by F.A. All authors analyzed the data and interpreted the results. Also, all authors prepared and corrected the draft.
Corresponding author
Ethics declarations
Ethics Approval
Not applicable.
Consent to Participate
Not applicable.
Consent for Publication
Informed consent was obtained from all individual participants included in the study.
Conflict of Interest
The authors declare no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Fig. S1
Schematic diagram of denim discoloration method: a) preparing of bath, b) discoloration process, c) deactivation of enzyme (s), washing (PNG 49 kb)
Fig. S2
Probable discoloration mechanism using the chemicals: a) releasing the dye molecules by surface degradation of the fibers (1); the dye molecules degradation by laccase (2), b) reduced the dye molecules by the usage of mediator (1); degradation of the reduced dye molecules performing laccase (2), c) combination of the fibers degradation by cellulase and reduction of the released dye molecules (1); simultaneous degradation of the released dye molecules and the reduced dye molecules by laccase (2). (PNG 54 kb)
Rights and permissions
About this article
Cite this article
Sarafpour, M., Alihosseini, F. & Bayat, M. New Laccase-Mediated System Utilized for Bio-Discoloration of Indigo-Dyed Denim Fabrics. Appl Biochem Biotechnol 194, 5848–5861 (2022). https://doi.org/10.1007/s12010-022-04066-5
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12010-022-04066-5