Abstract
The perchlorate reduction kinetic parameters of a microbial consortium using elemental sulfur (S0) as an electron donor were investigated in batch experiments. Standard Monod substrate utilization and biomass accumulation models were employed to fit the experimental data for microbial perchlorate reduction. The maximum observed yield coefficient for the microbial consortium was 0.19 mg dry weight (DW) mg−1 ClO4 −, suggesting that the microbial consortium had a slow growth rate using S0 as the electron donor. The maximum specific substrate utilization rate (q max) and half saturation constant (K s ) for microbial perchlorate reduction were 0.14 mg ClO4 − mg−1 DW day−1 and 5.71 mg L−1, respectively, which indicated that the microbial consortium could effectively utilize perchlorate as an electron acceptor. The variation of q max with pH was described well by using a Gaussian peak equation, and the maximal value of q max was obtained at pH 6.7. The presence of nitrate in perchlorate-contaminated water delayed the onset of sulfur autotrophic perchlorate reduction. The modified Gompertz equation could adequately describe the formation of Cl− and SO4 2− during the process of sulfur autotrophic perchlorate reduction. The SO4 2− production exceeded the theoretical SO4 2− production due to S0 disproportionation. The kinetic parameters for microbial perchlorate reduction are essential to design biological treatment systems, as well as to predict and evaluate their performance.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
Perchlorate (ClO4 −) is widely used in rockets, missiles, fireworks, and explosives, as well as in many other industrial processes (Coates and Achenbach 2004; Logan 2001). Perchlorate in surface and in ground water has been recognized as a significant contaminant in recent years. Perchlorate can disrupt thyroid function by interfering with iodine uptake of thyroid gland, which can lead to a decrease in the production of thyroid hormones (Siglin et al. 2000). The current methods for perchlorate removal from perchlorate-contaminated water mainly include ion exchange (Gu et al. 2007), membrane separation (Roach and Tush 2008), and biological reduction (Srinivasan and Sorial 2009). Ion exchange is a cost-effective technology for treatment of perchlorate-contaminated water. However, a major disadvantage of ion exchange is that it results in generation of contaminated resin or perchlorate-laden brine that must be further treated or disposed (Tripp et al. 2003). Membrane separation can remove perchlorate from the perchlorate-contaminated water, especially reverse osmosis, whereas it suffers from membrane fouling issue and generates large volumes of perchlorate-laden brine. Biological reduction can completely transform perchlorate into innocuous chloride, and it has been recognized as a promising technology to treat perchlorate-contaminated water.
Perchlorate-reducing bacteria are known to be ubiquitous in pristine and contaminated environments (Coates and Achenbach 2004; Coates et al. 1999). The heterotrophic ClO4 − reduction, utilizing simple organic substrates as electron donors, has been proven to have high treatment capacity and ClO4 − reduction rate (Min et al. 2004; Patel et al. 2008; Nor et al. 2011). However, heterotrophic ClO4 − reduction depends on the continual addition of organic substrates as electron donors to sustain microbial activity. The residual labile organic substrate in the effluent can stimulate microbial growth in water distribution systems and contribute to the formation of potentially toxic trihalomethanes during disinfection by chlorination (Thrash et al. 2007). To overcome the abovementioned problems, autotrophic microbial ClO4 − reduction has been carried out by utilizing inorganic donors, such as hydrogen gas (H2), elemental iron (Fe0), and elemental sulfur (S0). Perchlorate reduction using H2 as the electron donor has been successfully used in some bioreactors (Logan and Lapoint 2002; Nerenberg et al. 2002; Zhang et al. 2002; Van Ginkel et al. 2010). The deficiency of H2 as the electron donor is difficult to handle in bulk quantities, and it is publicly perceived as a significant disaster threat due to its inherent explosive nature. Microbial perchlorate reduction with Fe0 as the electron donor provided some conflicting results in previous studies. Shrout et al. (2005) reported that the addition of Fe0 to the anaerobic culture slowed the perchlorate reduction rate, which was attributed to the increase in pH and the encapsulation of microorganisms by iron precipitates. Yu et al. (2006) illustrated that Fe0 could serve as the electron donor for perchlorate reduction by providing H2 to Dechloromonas sp. HZ. Ju et al. (2008) found that S0 was suitable as the electron donor for perchlorate reduction by comparing with different inorganic donors. The S0 pellets as the electron donor can eliminate the issues associated with organic residuals, provide a slowly released supply of electron on demand, offer lower expense cost as well as lower maintenance cost, and produce little excess biomass. Batch experiments and packed-bed reactors utilizing S0 as the electron donor have been proven to be efficient for perchlorate reduction (Boles et al. 2012; Ju et al. 2007; Sahu et al. 2009). As we all know, the kinetic parameters of microbial perchlorate reduction are essential to design biological treatment systems, as well as to predict and evaluate their performance. However, little information has been found in the previously published literatures on evaluating the kinetic parameters for microbial perchlorate reduction using S0 as the electron donor. In order to design cost-effective biological treatment systems, it is very necessary to determine the kinetic parameters of sulfur autotrophic perchlorate reduction.
The main objectives in the present study were (1) to acclimatize a sulfur-utilizing perchlorate-reducing consortium; (2) to determine the maximum observed microbial yield on perchlorate, the microbial perchlorate reduction kinetics, and the kinetics on product formation; (3) to investigate the effects of pH and nitrate on sulfur-utilizing perchlorate reduction; and (4) to analyze the relationship between perchlorate reduction and product formation.
Materials and methods
Acclimation of sulfur autotrophic perchlorate-reducing microbial consortium
The sludge for the acclimation of sulfur autotrophic perchlorate-reducing microbial consortium was obtained from the anaerobic section of an anaerobic-anoxic-oxic process in the sewage treatment plant of Licun River, Qingdao. A 500-mL anaerobic flask was used to acclimatize sulfur autotrophic perchlorate reducing microbial consortium, which was sealed with a Teflon-faced butyl rubber stopper and aluminum seal. The acclimation was performed in fill and draw modes. The sulfur pellets with a 1- to 2-mm particle diameter and bicarbonate were used as the electron donor and inorganic carbon source, respectively. The synthetic culture medium contained the following components (g L−1): ClO4 −, 0.12–0.36; NH4HCO3, 0.41; NaHCO3, 2.7; MgSO4 · 7H2O, 0.1; Ca(OH)2, 0.005; and trace elements (1 mL L−1). The trace elements consisted of the following components (g L−1): H3BO3, 0.05; FeSO4 · 7H2O, 1.4; ZnSO4 · 7H2O, 0.106; MnSO4 · H2O, 0.415; (NH4)6Mo7O24 · H2O, 0.2; KAl (SO4)2 · 12H2O, 0.175; NiSO4 · 6H2O, 0.113; CoSO4 · 12H2O, 2.36; Na2SeO3 · 5H2O, 0.288; CuSO4 · 5H2O, 0.157; Na2WO4 · 2H2O, 0.5; and EDTA, 1.0. Nitrogen gas was injected into the culture medium for 20 min to remove oxygen before use, and the headspace of anaerobic flask was flushed with N2/CO2 (4:1, V:V) mixture. The suspended sludge in the anaerobic flask was continuously stirred in a thermostatic culture box at 25 ± 1 °C. When the removal efficiency of perchlorate was above 99 %, the acclimated mixed culture in the anaerobic flask was allowed to settle for 1 h. The supernatant was decanted and then replaced with the same volume of fresh culture medium. The entire acclimation process was continuously operated for 135 days.
Kinetic parameters of sulfur autotrophic perchlorate reduction
In order to determine the kinetic parameters of sulfur autotrophic perchlorate-reducing microbial consortia, the initial ClO4 − concentrations in the anaerobic flask exceeded the range typically observed at most ClO4 −-contaminated sites. The anaerobic flask was used to determine kinetic parameters of autotrophic perchlorate reduction, which was filled with the acclimated sludge, sulfur pellets, and fresh culture medium containing ClO4 −. Tables 1 and 2 illustrate the experimental conditions of kinetic parameter determination during autotrophic perchlorate reduction. Prior to the experiment, nitrogen gas was injected into the culture medium for 20 min to remove oxygen, and the headspace of the anaerobic flask was flushed with N2/CO2 (4:1, V:V) mixture. The anaerobic flask was sealed using the Teflon-faced butyl rubber stopper and aluminum seal. The anaerobic flask was shaken in an orbital incubator at a rotation speed of 180 rpm (revolutions per minute) during the experiment. Triplicate samples were analyzed to determine the concentrations of biomass, ClO4 −, Cl−, SO4 2−, and NO3 −-N at different times.
Analytical methods
The water sample was filtered using a 0.22-μm filter membrane and then stored in a refrigerator at 4 °C for further analysis. The pH was monitored with a portable pH meter (Model6010, WTW, Germany). The concentrations of ClO4 −, ClO3 −, ClO2 −, Cl−, and SO4 2− were determined by an ion chromatography instrument (ICS-3000, Dionex, USA). The biomass in the present study was expressed by mixed liquor volatile suspended solids (MLVSS). The MLVSS was separated from the mixture of sludge and S0 by a centrifugal machine and was then measured according to the method described by Wei (2002).
Microbial community analysis
Denaturing gradient gel electrophoresis (DGGE) was used to analyze the microbial community of the acclimated microbial consortium. DNA extraction, DGGE, and sequencing were performed according to the method reported by Wang et al. (2014). Dendrogram relating to band pattern similarity was automatically calculated using the unweighted pair group method with the arithmetic average (UPGMA) clustering algorithm, which was included in the Quantity One software.
Bacteria serial numbers were obtained from the ribosomal database project (http://rdp.cme.msu.edu/). Sequence comparisons were conducted with the BLAST search option in the NCBI nucleotide sequence database (http://www.ncbi.nlm.nih.gov/).
Results and discussion
Acclimation of sulfur autotrophic perchlorate-reducing microbial consortium
The sulfur autotrophic perchlorate-reducing microbial consortium was acclimated in fill and draw modes in a 500-mL anaerobic flask. Figure 1 shows the variation of perchlorate concentration in the anaerobic flask during the acclimation. Stable ClO4 − removal was observed in the anaerobic flask by repeatedly adding the fresh medium containing ClO4 − for 135 days. The acclimation period to reach an eventual ClO4 − concentration (less than 1 mg L−1) gradually decreased with the increase of acclimation time. When the initial ClO4 − concentrations were 240 and 360 mg L−1, the shortest acclimation periods were 3 and 4 days, respectively. ClO3 − and ClO2 − in the anaerobic flask were not detected during the entire acclimation.
The PCR-DGGE was used to analyze the change of microbial community structure in the anaerobic flask with the increase of acclimation time (Fig. 2a). The quantity of discernable band was 11, 11, and 9 in the DGGE gel from the sludge samples at 0 (seed sludge), 31, and 135 days, respectively. The DGGE analysis showed that the band profile and band intensity changed with the increase of acclimation time. Only bands 1 and 2 were consistently present in the entire acclimation. Some bands (3, 4, 7, 9, 12, 13, 16, and 20) gradually disappeared or weakened, while others (5, 6, 15, 18, and 19) appeared at the end of acclimation.
A UPGMA clustering analysis was used to analyze the microbial community similarities among the sludge samples of 0 (seed sludge), 31, and 135 days. As shown in Fig. 2b, the microbial populations were categorized into two separate groups. The first group represented the seed sludge and the second group comprised the sludge samples of 31 and 135 days. The microbial community structure of sludge sample on 135 days had the least similarity to the other sludge samples, suggesting that the microbial community in the anaerobic flask was dramatically altered with the increase of the accumulation time.
To gain further insight into the microbial community structure, 20 discernable bands were excised from the DGGE gel and then sequenced. The detected sequences were compared with sequences deposited in the database using the BLAST program of GenBank. The most similar sequences of discernable DGGE bands and the phylogenetic tree are shown in Table 1 and Fig. 2c, respectively. Some bacteria in the seed sludge gradually disappeared or weakened with the increase of acclimation time, such as Brevundimonas vesicularis (band 3), Brevundimonas vesicularis (band 7), and Hydrogenophaga pseudoflava (T) (band 20). However, Chitinophagaceae bacterium L2-4 (band 1) and Hydrotalea sp. AF-51 (band 2) were present in the entire acclimation period, suggesting that these bacteria could utilize S0 as the electron donor for microbial perchlorate reduction. Although some bacteria were not detected in the seed sludge, such as Methylobacterium fujisawaense (band 5), Tistrella bauzanensis (band 10), Zoogloea caeni (T) (band 15), Stenotrophomonas maltophilia (band 18), and Hyphomicrobium sp. 16-60 (T) (band 19), they gradually became predominant at the end of the acclimation, which might also have the ability to utilize S0 as the electron donor for microbial perchlorate reduction.
The maximum observed microbial yield on perchlorate
Batch experiments were used to determine the kinetic parameters of microbial perchlorate reduction under anaerobic conditions using S0 as the electron donor. The perchlorate reduction occurred concurrently with the growth of microbial consortium. When the contents of S0 and inorganic nutrients in the anaerobic flask are sufficient, the kinetics of microbial growth and perchlorate reduction can be determined in separate experiments using the standard Monod substrate utilization and biomass accumulation equations as follows (Nerenberg et al. 2006; Wang et al. 2008):
Monod substrate utilization equation
Biomass accumulation equation
where S is the perchlorate concentration (mg L−1), t is the time (h), q max is the maximum specific substrate utilization rate for perchlorate (h−1), K s is the half saturation constant (μg L−1), X is the microbial concentration (mg L−1), μ max is the maximum specific growth rate (h−1), and b is the endogenous decay rate (h−1).
As the S0 content in the anaerobic flask was in excess for microbial perchlorate reduction, the mass transfer did not limit the reduction rate in the present study. According to Wang et al. (2008), the observed yield coefficient (Y) is defined as follows:
Because the initial perchlorate concentration at 1200 mg L−1 in the anaerobic flask was much higher than K s (S> > K s ), the Y max could be calculated as follows:
When S in the aerobic flask is much higher than K s , the microbial yield for perchlorate is considered to be constant. Wang et al. (2008) reported a linear relationship between X and S by integrating \( Y=\frac{dX}{-dS} \) in Eq. (3) as follows:
where X 0 is the initial biomass concentration (mg L−1), S 0 is the initial perchlorate concentration (mg L−1), and Y max is the maximum observed microbial yield on perchlorate.
Figure 3 shows the maximum observed yield on perchlorate for sulfur autotrophic perchlorate reducing microbial consortium. The residual perchlorate concentration in the aerobic flask was controlled at a level higher than 200 mg L−1, which is much larger than the known K s values for mixed or pure perchlorate-reducing bacteria (Rikken et al. 1996; Logan et al. 2001; Waller et al. 2004). As shown in Fig. 3, the maximum observed yield coefficient for the sulfur autotrophic perchlorate-reducing microbial consortium in the present study was 0.19 mg DW mg−1 ClO4 −. Waller et al. (2004) reported that the maximum observed yield coefficients for heterotrophic perchlorate reduction bacteria were in the range of 0.34 and 0.36 mg DW mg−1 ClO4 −. Compared to heterotrophic perchlorate reduction bacteria, autotrophic perchlorate-reducing bacteria using S0 as the electron donor had a lower growth rate.
Microbial perchlorate reduction kinetics
To determine the microbial perchlorate reduction kinetics, the reciprocal style of Eq. (1) is shown as follows:
The integral of Eq. (6) is defined as follows:
where S 0 is the initial perchlorate concentration (mg L−1), \( A=-\frac{1}{X{q}_{\max }} \), and \( B=-\frac{K{}_s}{X{q}_{\max }} \).
The parameters A and B are obtained by fitting the numerically calculated data with least square method, and K s and q max are determined in turn. Figure 4 shows the curve fitting for the microbial perchlorate reduction kinetics. S 0 and X in the present study were 250 and 421.7 mg L−1, respectively. The parameters K s and q max were determined to be 5.71 and 0.14 mg ClO4 − mg−1 DW day−1, respectively, which indicated that the microbial consortium could effectively utilize perchlorate as an electron acceptor.
Kinetics of Cl− and SO4 2− formation
Sahu et al. (2009) reported a stoichiometric equation for sulfur autotrophic perchlorate reduction as follows:
As sulfur autotrophic perchlorate reduction could lead to the presence of Cl− and SO4 2−, their formation kinetic parameters were evaluated in the present study. A modified Gompertz equation was employed to model the formation of Cl− and SO4 2− as follows (van Ginkel et al. 2001; Lin and Lay 2004):
where i represents Cl− or SO4 2−, P i (t) is the cumulative amount of product i at perchlorate reduction time t, P max,i is the maximal amount of product i produced, R max,i is the maximum formation rate of product i, and λ i is the lag time before the exponential product is formed.
The cumulative amounts of Cl− and SO4 2− were fitted as a function of the reaction time by using the modified Gompertz equation (Fig. 5), and the kinetic parameters for the formation of Cl− and SO4 2− were summarized in Table 3. The Cl− and SO4 2− correlation coefficients (R 2) of the nonlinear analysis using Eq. (9) were 0.995 and 0.981, respectively. The results suggested that the modified Gompertz equation could adequately describe the formation of Cl− and SO4 2− during the process of sulfur autotrophic perchlorate reduction. According to Eq. (8), the theoretical SO4 2− production is 699.5 when the initial ClO4 − concentration is 250 mg L−1. However, the practical SO4 2− production was 892.6 mg L−1 (Fig. 5), which was higher than the theoretical SO4 2− production. The excess SO4 2− production might come from S0 disproportionation that was a competing microbial reaction in the anaerobic flask. Ju et al. (2007) also reported that S0 disproportionation could lead to the higher SO4 2− production for perchlorate reduction than the theoretical SO4 2− production.
Relationship between perchlorate reduction and product formation
As the initial ClO4 − concentration was 250 mg L−1 ClO4 −, the S0 concentration at 250 g L−1 in the anaerobic flask was much greater than the theoretical required S0 content for microbial perchlorate reduction. Therefore, the initial ClO4 − concentration was a key factor for evaluating the relationship between the perchlorate reduction and product formation in the present study. The correlation between the product and substrate could be expressed as follows (Yang et al. 1988):
where \( {Y}_{P_i} \) is the yield of product i, t is the time, S 0 is the initial ClO4 − concentration, and S is the ClO4 − concentration at time t.
The fitted plots are shown in Fig. 6. The correlation coefficients (R 2) for Cl− and SO4 2− were 0.987 and 0.994, respectively, suggesting that Eq. (13) could successfully simulate the relationship between the products and substrate. The yield of Cl− was estimated at 0.35 mg mg−1 ClO4 −, which was close to the theoretical Cl− production according to Eq. (8). However, the yield of SO4 2− was estimated at 3.41 mg mg−1 ClO4 −, which exceeded the theoretical SO4 2− production due to S0 disproportionation.
pH effect on microbial perchlorate reduction
The anaerobic flasks with 200 mL culture medium were employed to investigate the effect of pH on sulfur autotrophic perchlorate reduction, which contained 250 mg L−1 ClO4 −, 426.76 mg L−1 MLVSS, and 250 g L−1 S0 with a 1- to 2-mm particle diameter. Low concentration of phosphate in the culture medium was used to buffer the pH. Figure 7a shows the effect of the initial pH on the microbial perchlorate reduction. The microbial consortium could hardly reduce perchlorate at pH 5. When the initial pH of the culture medium was 6, 7, 8, and 9, the ClO4 − removal efficiency was 65.2, 99.6, 58.0, and 43.2 % after 108 h, respectively. Based on the experimental results, the optimal pH range for perchlorate reduction was near the neutral environment for the acclimated microbial consortium in the present study. Wang et al. (2008) also reported that the maximum perchlorate removal efficiency for heterotrophic and mixed perchlorate-reducing bacteria occurred at pH 7.0.
The relation between the q max and the initial pH is shown in Fig. 7b. According to Wang et al. (2008), a transformed Gaussian peak equation was used to fit the calculated q max by changing σ in Excel Solver to minimize SSE as follows:
where q max, pH is q max at a specific pH, q max, pH 6.7 is q max at pH 6.7, and σ is the standard deviation.
As shown in Fig. 7b, the maximum microbial perchlorate reduction rate was obtained at pH 6.7 by analyzing the variation of q max in the pH range from 5 to 9.
The optimum pH in the present study was consistent with the previous researches for both pure and mixed perchlorate-reducing bacteria (Attaway and Smith 1993; Herman and Fankenberger 1999; Wallace et al. 1996).
Effect of nitrate addition on microbial perchlorate reduction
The effect of nitrate addition on microbial perchlorate reduction was evaluated in a culture medium containing 250 mg L−1 ClO4 −, 564.2 mg L−1 MLSS, and 250 g L−1 S0 pellet with a 1- to 2-mm particle diameter. As shown in Fig. 8, the required time for complete microbial perchlorate reduction gradually increased from 156 to 204 h with the increase of initial nitrate concentration from 50 to 300 mg L−1, suggesting that the presence of nitrate could delay the process of sulfur autotrophic perchlorate reduction. Although the addition of nitrate delayed the onset of sulfur autotrophic perchlorate reduction, the simultaneous reductions of perchlorate and nitrate were found by investigating the variation of Cl− production (data not shown). These phenomenon could be explained as follows: (1) sulfur autotrophic perchlorate reduction bacteria and denitrifiers might coexist in the acclimated microbial consortium; (2) some bacterial strains in the acclimated microbial consortium could use nitrate as an electron acceptor, whereas they could not use perchlorate as an electron acceptor; (3) some bacterial strains in the acclimated microbial consortium could simultaneously utilize nitrate and perchlorate as electron acceptors; and (4) some sulfur autotrophic perchlorate reduction bacteria might not utilize nitrate as a electron acceptor. The results in the present study showed the presence of nitrate in the anaerobic flask delayed the onset of sulfur autotrophic perchlorate reduction. Ju et al. (2007) also reported that the addition of nitrate to sulfur-oxidizing perchlorate reduction bacteria delayed the onset of ClO4 − reduction until nitrate was partially consumed.
Conclusions
The kinetic parameters for sulfur autotrophic perchlorate reduction were determined in batch experiments. The maximum observed yield coefficient indicated that the microbial consortium using S0 as the electron donor had a slower growth rate than heterotrophic perchlorate reduction bacteria, which could produce little excess biomass in practical applications. The maximum specific substrate utilization rate and half saturation constant for microbial perchlorate reduction showed that the microbial consortium could effectively utilize perchlorate as the electron acceptor. The maximum microbial perchlorate reduction rate was obtained at pH 6.7 using a Gaussian peak equation. The presence of nitrate in perchlorate-contaminated water could delay the onset of sulfur autotrophic perchlorate reduction. The modified Gompertz equation could adequately describe the formation of Cl− and SO4 2− during the process of sulfur autotrophic perchlorate reduction. The fitted SO4 2− production exceeded the theoretical SO4 2− production due to S0 disproportionation. The perchlorate reduction kinetic parameters in the present study can be used to design biological treatment systems in practical applications.
References
Attaway H, Smith M (1993) Reduction of perchlorate by an anaerobic enrichment culture. J Ind Microbiol 12:408–412
Boles AR, Conneely T, Mckeever R, Nixon P, Nüsslein KR, Ergas SJ (2012) Performance of a pilot-scale packed bed reactor for perchlorate reduction using a sulfur oxidizing bacterial consortium. Biotech Bioeng 109:637–646
Coates JD, Achenbach LA (2004) Microbial perchlorate reduction: rocket-fuelled metabolism. Nat Rew Microbiol 2:569–580
Coates JD, Michaelidou U, Bruce RA, O’Connor SM, Crespi NJ, Achenbach LA (1999) Ubiquity and diversity of dissimilatory (per) chlorate-reducing bacteria. Appl Environ Microbiol 65:5234–5241
Gu B, Brown GM, Chiang CC (2007) Treatment of perchlorate-contaminated groundwater using highly selective, regenerable ion-exchange technologies. Environ Sci Technol 41:6277–6282
Herman DC, Fankenberger WT Jr (1999) Bacterial reduction of perchlorate and nitrate in water. J Environ Qual 28:1018–1024
Ju XM, Field JA, Sierra-Alvarez R, Salazar M, Bently H, Bentley R (2007) Chemolithotrophic perchlorate reduction linked to the oxidation of elemental sulfur. Biotech Bioeng 96:1073–1082
Ju XM, Sierra-Alvarez R, Field JA, Byrnes DJ, Bently H, Bentley R (2008) Microbial perchlorate reduction with elemental sulfur and other inorganic electron donors. Chemosphere 71:114–122
Lin CY, Lay CH (2004) Effects of carbonate and phosphate concentrations on hydrogen production using anaerobic sewage sludge microflora. Int J Hydrogen Energ 29:275–281
Logan BE (2001) Peer reviewed: assessing the outlook for perchlorate remediation. Environ Sci Technol 35:482A–487A
Logan BE, LaPoint D (2002) Treatment of perchlorate- and nitrate-contaminated groundwater in an autotrophic, gas phase, packed-bed bioreactor. Wat Res 36:3647–3653
Logan BE, Zhang H, Mulvaney P, Milner MG, Head IM, Unz RF (2001) Kinetics of perchlorate- and chlorate-respiring bacteria. Appl Environ Microbial 67:2499–2506
Min B, Evans PJ, Chu AK, Logan BE (2004) Perchlorate removal in sand and plastic media bioreactors. Water Res 38:47–60
Nerenberg R, Rittmann BE, Najim I (2002) Perchlorate reduction in a hydrogen-based membrane biofilm reactor. J Am Water works Assoc 94:103–114
Nerenberg R, Kawagoshi Y, Rittmann BE (2006) Kinetics of a hydrogen-oxidizing, perchlorate-reducing bacteria. Water Res 40:3290–3296
Nor SJ, Lee SH, Cho KS, Cha DK, Lee KI, Ryu HW (2011) Microbial treatment of high-strength perchlorate wastewater. Biores Technol 102:835–841
Patel A, Zuo G, Lehman SG, Badruzzaman M, Clifford DA, Roberts DJ (2008) Fluidized bed reactor for the biological treatment of ion-exchange brine containing perchlorate and nitrate. Water Res 42:4291–4298
Rikken GB, Kroon AGM, van Ginkel CG (1996) Transformation of perchlorate into chloride by a newly isolated bacterium: reduction and dismutation. Appl Microbiol Biotechnol 45:420–426
Roach JD, Tush D (2008) Equilibrium dialysis and ultrafiltration investigations of perchlorate from solution using poly (diallyldimethylammonium) chloride. Water Res 42:1204–1210
Sahu AK, Conneely T, Nüsslein KR, Ergas SJ (2009) Biological perchlorate reduction in packed bed reactors using elemental sulfur. Environ Sci Technol 43:4466–4471
Shrout JD, Williams AGB, Scherer MM, Parkin GF (2005) Inhibition of bacterial perchlorate reduction by zero-valent iron. Biodegradation 16:23–32
Siglin JC, Mattie DR, Dodd DE, Hildebrandt PK, Baker WH (2000) A 90-day drinking water toxicity study in rats of the environmental contaminant ammonium perchlorate. Toxicol Sci 57:61–74
Srinivasan R, Sorial GA (2009) Treatment of perchlorate in drinking water: a critical review. Sep Purif Technol 69:7–21
Thrash JC, Trump JIV, Weber KA, Miller E, Achenbach LA, Coates JD (2007) Electrochemical stimulation of microbial perchlorate reduction. Environ Sci Technol 41:1740–1746
Tripp AR, Clifford D, Roberts DJ, Cang Y, Aidridge L, Gillogly T, Boulos L (2003) Treatment of perchlorate in groundwater by ion exchange technology. AWWA Research Foundation Report 2532; American Water Works Association: Denver, Co, 2003
Van Ginkel S, Sung S, Lay JJ (2001) Biohydrogen production as a function of pH and substrate concentration. Environ Sci Technol 35:4726–4730
Van Ginkel SW, Lamendella R, Kovacik WP, Santo Domingo JW, Rittmann BE (2010) Microbial community structure during nitrate and perchlorate reduction in ion-exchange brine using the hydrogen-based membrane biofilm reactor (MBfR). Biores Technol 101:3747–3750
Wallace W, Ward T, Breen A, Attaway H (1996) Identification of an anaerobic bacterium which reduces perchlorate and chlorate as Wolinella succinogenes. J Ind Microbiol 16:68–72
Waller AS, Cox EE, Edwards EA (2004) Perchlorate-reducing microorganisms isolated from contaminated sites. Environ Microbiol 6:517–527
Wang C, Lippincott L, Meng XG (2008) Kinetics of biological perchlorate reduction and pH effect. J Hazard Mater 153:663–669
Wang ZC, Gao MC, Zhang Y, She ZL, Ren Y, Wang Z, Zhao CC (2014) Perchlorate reduction by hydrogen autotrophic bacteria in a bioelectrochemical reactor. J Environ Manage 142:10–16
Wei F (2002) Analytic method of water quality on water and wastewater (the fourth edition, in Chinese), China Environmental Science Press
Yang ST, Tang IC, Okos MR (1988) Kinetics and mathematical modeling of homoacetic fermentation of lactate by Clostridium formicoaceticum. Biotechnol Bioeng 32:797–802
Yu X, Amrheim C, Deshusses MA, Matsumoto MR (2006) Perchlorate reduction by autotrophic bacteria in the presence of zero-valent iron. Environ Sci Technol 40:1328–1334
Zhang H, Bruns MA, Logan BE (2002) Perchlorate reduction by a novel chemolithoautotraphic hydrogen-oxidizing bacterium. Environ Microbiol 4:570–576
Acknowledgments
The work is founded by the National Natural Science Foundation of China (No. 21077096).
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible editor: Robert Duran
Rights and permissions
About this article
Cite this article
Gao, M., Wang, S., Jin, C. et al. Autotrophic perchlorate reduction kinetics of a microbial consortium using elemental sulfur as an electron donor. Environ Sci Pollut Res 22, 9694–9703 (2015). https://doi.org/10.1007/s11356-015-4147-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-015-4147-x