Abstract
In this study, vibration and dynamic stability of fluid-conveying thin-walled rotating pipes reinforced with functionally graded carbon nanotubes are studied. The pipe is modeled based on thin-walled Timoshenko beam theory and reinforced by single-walled carbon nanotubes with uniform distribution as well as three types of functionally graded distribution patterns. The governing equations of motion and the associated boundary conditions are derived via Hamilton’s principle. The governing equations of motion are discretized via the Galerkin method, and the eigenfrequency and the stability region of the pipe are found using the eigenvalue analysis. Some numerical examples are presented to study the effects of length–radius ratio, carbon nanotubes distribution, volume fraction of carbon nanotubes, rotational speed and mass ratio on the non-dimensional eigenfrequency and critical flutter velocity of the thin-walled rotating pipe conveying fluid. The results show that the carbon nanotubes distribution has a significant effect on the non-dimensional eigenfrequency and critical flutter velocity. Also, it is found that the rotational speed has a stabilizing effect on the dynamic behavior of the system.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bekyarova, E., Thostenson, E.T., Yu, A., Kim, H., Gao, J., Tang, J., Hahn, H.T., Chou, T.W., Itkis, M.E., Haddon, R.C.: Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites. Langmuir 23(5), 3970–3974 (2007)
Ke, L.L., Yang, J., Kitipornchai, S.: Nonlinear free vibration of functionally graded carbon nanotube-reinforced composite beams. Compos. Struct. 92(3), 676–683 (2010)
Yas, M.H., Samadi, N.: Free vibrations and buckling analysis of carbon nanotube-reinforced composite Timoshenko beams on elastic foundation. Int. J. Press. Vessels Pip. 98, 119–128 (2012)
Yas, M.H., Heshmati, M.: Dynamic analysis of functionally graded nanocomposite beams reinforced by randomly oriented carbon nanotube under the action of moving load. Appl. Math. Model. 36(4), 1371–1394 (2012)
Rafiee, M., Yang, J., Kitipornchai, S.: Large amplitude vibration of carbon nanotube reinforced functionally graded composite beams with piezoelectric layers. Compos. Struct. 96, 716–725 (2013)
Lin, F., Xiang, Y.: Vibration of carbon nanotube reinforced composite beams based on the first and third order beam theories. Appl. Math. Model. 38(15–16), 3741–3754 (2014)
Wattanasakulpong, N., Ungbhakorn, V.: Analytical solutions for bending, buckling and vibration responses of carbon nanotube-reinforced composite beams resting on elastic foundation. Comput. Mater. Sci. 71, 201–208 (2013)
Fazelzadeh, S.A., Pouresmaeeli, S., Ghavanloo, E.: Aeroelastic characteristics of functionally graded carbon nanotube-reinforced composite plates under a supersonic flow. Comput. Methods Appl. Mech. Eng. 285, 714–729 (2015)
Asadi, H., Souri, M., Wang, Q.: A numerical study on flow-induced instabilities of supersonic FG-CNT reinforced composite flat panels in thermal environments. Compos. Struct. 171, 113–125 (2017)
Alibeigloo, A., Liew, K.M.: Elasticity solution of free vibration and bending behavior of functionally graded carbon nanotube-reinforced composite beam with thin piezoelectric layers using differential quadrature method. Int. J. Appl. Mech. 07(01), 1550002 (2015)
Mirzaei, M., Kiani, Y.: Nonlinear free vibration of temperature-dependent sandwich beams with carbon nanotube-reinforced face sheets. Acta Mech. 227(5), 1869–1884 (2016)
Thomas, B., Roy, T.: Vibration analysis of functionally graded carbon nanotube-reinforced composite shell structures. Acta Mech. 227(2), 581–599 (2016)
Païdoussis, M.P.: Fluid-Structure Interactions: Slender Structures and Axial Flow, vol. 1. Academic Press, New York (1998)
Kuiper, G.L., Metrikine, A.V., Battjes, J.A.: A new time-domain drag description and its influence on the dynamic behaviour of a cantilever pipe conveying fluid. J. Fluids Struct. 23(3), 429–445 (2007)
Ghorbanpour Arani, A., Dashti, P., Amir, S., Yousefi, M.: Nonlinear vibration of coupled nano-and microstructures conveying fluid based on Timoshenko beam model under two-dimensional magnetic field. Acta Mech. 226(8), 2729–2760 (2015)
Hosseini, M., Bahaadini, R.: Size dependent stability analysis of cantilever micro-pipes conveying fluid based on modified strain gradient theory. Int. J. Eng. Sci. 101, 1–13 (2016)
Ning, W.B., Zhang, J.G., Chen, W.D.: Dynamics and stability of a functionally graded cylindrical thin shell containing swirling annular fluid flow including initial axial loads. Acta Mech. 227(8), 2157–2170 (2016)
Kjolsing, E.J., Todd, M.D.: Damping of a fluid-conveying pipe surrounded by a viscous annulus fluid. J. Sound Vib. 394, 575–592 (2017)
Wang, B., Deng, Z., Ouyang, H., Wang, Y.: Terahertz wave propagation in a fluid-conveying single-walled carbon nanotube with initial stress subjected to temperature and magnetic fields. Acta Mech. 226(9), 3031–3043 (2015)
Bahaadini, R., Hosseini, M., Jamalpoor, A.: Nonlocal and surface effects on the flutter instability of cantilevered nanotubes conveying fluid subjected to follower forces. Physica B Condens. Matter 509, 55–61 (2017)
Bahaadini, R., Saidi, A.R., Hosseini, M.: On dynamics of nanotubes conveying nanoflow. Int. J. Eng. Sci. 123, 181–196 (2018)
Bahaadini, R., Hosseini, M., Jamali, B.: Flutter and divergence instability of supported piezoelectric nanotubes conveying fluid. Physica B Condens. Matter 529, 57–65 (2018)
Hosseini, M., Bahaadini, R., Jamali, B.: Nonlocal instability of cantilever piezoelectric carbon nanotubes by considering surface effects subjected to axial flow. J. Vib. Control 24(9), 1809–1825 (2016)
Hosseini, M., Maryam, A.Z.B., Bahaadini, R.: Forced vibrations of fluid-conveyed double piezoelectric functionally graded micropipes subjected to moving load. Microfluid. Nanofluid. 21(8), 134 (2017)
Askarian, A.R., Haddadpour, H., Firouz-Abadi, R.D., Abtahi, H.: Nonlinear dynamics of extensible viscoelastic cantilevered pipes conveying pulsatile flow with an end nozzle. Int. J. Non-Linear Mech. 91, 22–35 (2017)
Panussis, D.A., Dimarogonas, A.D.: Linear in-plane and out-of-plane lateral vibrations of a horizontally rotating fluid-tube cantilever. J. Fluids Struct. 14(1), 1–24 (2000)
Yoon, H.I., Son, I.S.: Dynamic response of rotating flexible cantilever pipe conveying fluid with tip mass. Int. J. Mech. Sci. 49(5), 878–887 (2007)
Wang, L., Zhong, Z.: Radial basis collocation method for the dynamics of rotating flexible tube conveying fluid. Int. J. Appl. Mech. 7(03), 1550045 (2015)
Khajehpour, S., Azadi, V.: Vibration suppression of a rotating flexible cantilever pipe conveying fluid using piezoelectric layers. Latin Am. J. Solids Struct. 12(4), 1042–1060 (2015)
Karimi-Nobandegani, A., Fazelzadeh, S.A., Ghavanloo, E.: Effect of uniformly distributed tangential follower force on the stability of rotating cantilever tube conveying fluid. Latin Am. J. Solids Struct. 13(2), 365–377 (2016)
Safarpour, H., Ghadiri, M.: Critical rotational speed, critical velocity of fluid flow and free vibration analysis of a spinning SWCNT conveying viscous fluid. Microfluid. Nanofluid. 21(2), 22 (2017)
Librescu, L., Oh, S.Y., Song, O.: Thin-walled beams made of functionally graded materials and operating in a high temperature environment: vibration and stability. J. Therm. Stresses 28(6–7), 649–712 (2005)
Oh, S.Y., Librescu, L., Song, O.: Vibration and instability of functionally graded circular cylindrical spinning thin-walled beams. J. Sound Vib. 285(4), 1071–1091 (2005)
Fazelzadeh, S.A., Hosseini, M.: Aerothermoelastic behavior of supersonic rotating thin-walled beams made of functionally graded materials. J. Fluids Struct. 23(8), 1251–1264 (2007)
Fazelzadeh, S.A., Malekzadeh, P., Zahedinejad, P., Hosseini, M.: Vibration analysis of functionally graded thin-walled rotating blades under high temperature supersonic flow using the differential quadrature method. J. Sound Vib. 306(1), 333–348 (2007)
Oh, S.Y., Librescu, L., Song, O.: Vibration of turbomachinery rotating blades made-up of functionally graded materials and operating in a high temperature field. Acta Mech. 166(1), 69–87 (2003)
Sina, S.A., Haddadpour, H., Navazi, H.M.: Nonlinear free vibrations of thin-walled beams in torsion. Acta Mech. 223(6), 2135–2151 (2012)
Li, X., Li, Y.H., Qin, Y.: Free vibration characteristics of a spinning composite thin-walled beam under hygrothermal environment. Int. J. Mech. Sci. 119, 253–265 (2016)
Cihan, M., Eken, S., Kaya, M.O.: Dynamic instability of spinning launch vehicles modeled as thin-walled composite beams. Acta Mech. 228(12), 4353–4367 (2017)
Hosseini, M., Fazelzadeh, S.A.: Thermomechanical stability analysis of functionally graded thin-walled cantilever pipe with flowing fluid subjected to axial load. Int. J. Struct. Stab. Dyn. 11(03), 513–534 (2011)
Eftekhari, M., Hosseini, M.: On the stability of spinning functionally graded cantilevered pipes subjected to fluid-thermomechanical loading. Int. J. Struct. Stab. Dyn. 16(09), 1550062 (2015)
Choi, J., Song, O., Kim, S.K.: Nonlinear stability characteristics of carbon nanotubes conveying fluids. Acta Mech. 224(5), 1383–1396 (2013)
Yun, K., Choi, J., Kim, S.K., Song, O.: Flow-induced vibration and stability analysis of multi-wall carbon nanotubes. J. Mech. Sci. Technol. 26(12), 3911–3920 (2012)
Shen, H.S.: Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments. Compos. Struct. 91(1), 9–19 (2009)
Song, O., Librescu, L.: Structural modeling and free vibration analysis of rotating composite thin-walled beams. J. Am. Helicopter Soc. 42(4), 358–369 (1997)
Bahaadini, R., Hosseini, M.: Effects of nonlocal elasticity and slip condition on vibration and stability analysis of viscoelastic cantilever carbon nanotubes conveying fluid. Comput. Mater. Sci. 114, 151–159 (2016)
Bahaadini, R., Hosseini, M.: Flow-induced and mechanical stability of cantilever carbon nanotubes subjected to an axial compressive load. Appl. Math. Model. 59, 597–613 (2018)
Zhu, P., Lei, Z.X., Liew, K.M.: Static and free vibration analyses of carbon nanotube-reinforced composite plates using finite element method with first order shear deformation plate theory. Compos. Struct. 94(4), 1450–1460 (2012)
Gregory, R.W., Païdoussis, M.P.: Unstable oscillation of tubular cantilevers conveying fluid. I. Theory. Proc. R. Soc. Lond. A Math. Phys. Eng. Sci. 1435, 512–527 (1966)
Bahaadini, R., Hosseini, M.: Nonlocal divergence and flutter instability analysis of embedded fluid-conveying carbon nanotube under magnetic field. Microfluid. Nanofluid. 20(5), 1–14 (2016)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Bahaadini, R., Saidi, A.R. & Hosseini, M. Dynamic stability of fluid-conveying thin-walled rotating pipes reinforced with functionally graded carbon nanotubes. Acta Mech 229, 5013–5029 (2018). https://doi.org/10.1007/s00707-018-2286-0
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-018-2286-0