Abstract
Bioethanol fermentations expose yeasts to a new, complex and challenging fermentation medium with specific inhibitors and sugar mixtures depending on the type of carbon source. It is, therefore, suggested that the natural diversity of yeasts should be further exploited in order to find yeasts with good ethanol yield in stressed fermentation media. In this study, we screened more than 50 yeast isolates of which we selected five isolates with promising features. The species Candida bombi, Wickerhamomyces anomalus and Torulaspora delbrueckii showed better osmo- and hydroxymethylfurfural tolerance than Saccharomyces cerevisiae. However, S. cerevisiae isolates had the highest ethanol yield in fermentation experiments mimicking high gravity fermentations (25 % glucose) and artificial lignocellulose hydrolysates (with a myriad of inhibitors). Interestingly, among two tested S. cerevisiae strains, a wild strain isolated from an oak tree performed better than Ethanol Red, a S. cerevisiae strain which is currently commonly used in industrial bioethanol fermentations. Additionally, a W. anomalus strain isolated from sugar beet thick juice was found to have a comparable ethanol yield, but needed longer fermentation time. Other non-Saccharomyces yeasts yielded lower ethanol amounts.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Introduction
In order to shift away from a petroleum-based energy source the European Union wants to establish the use of waste organic biomass as a renewable energy source. Currently used (so-called “first generation”) organic biomass sources are regular feedstocks with high sugar content (such as wheat, maize, sugar cane or beet) [34]. Whereas these sources might be suitable for high-end, but low quantity products, their role in bulk production of chemicals such as bioethanol is debated as they are competitive with food production. Indeed, it can cause an increase of the food price due to direct competition with the foodstock or through competition with agricultural land [7, 15]. Lignocellulosic biomass has, therefore, received increasing attention as an alternative for food energy crops. It is a renewable source originating from plant material, widely available and relatively inexpensive and can be non-competitive with food production [14].
The improved use of these types of biomass for bioethanol production yields some hurdles to be tackled. Very high gravity fermentations using first-generation biomass [3] imply a high osmotic stress due to high sugar concentrations and high ethanol stress due to ethanol production during fermentation. Main added-value characteristics for bioethanol production strains are, therefore, high osmo- and ethanol tolerance. Lignocellulosic biomass is a more diverse and complex biomass compared to first-generation biomass. It mainly consists of the sugar polymers cellulose and hemicellulose and the phenolic polymer lignin [18, 27, 29]. The cellulose fraction contains glucose monomers, while hemicellulose consists of a variety of C6 (mainly glucose) and C5 sugars (mainly xylose). These sugars are bound into the plant matrix and, therefore, need to be made available for fermentation by, for example, hydrolysis using acid or base at high temperatures [22, 29, 37]. The liberated sugar concentration depends on the treatment type and intensity with high-intensity treatments yielding higher sugar concentrations [37]. Typical total sugar concentrations vary between 100 and 200 g l−1 with glucose concentrations about double of xylose concentrations [37]. While C6 sugars are readily fermented to ethanol by conventional yeasts such as Saccharomyces cerevisiae, S. cerevisiae is unable to utilize xylose [4]. The fermentation of xylose, however, contributes to an economically viable second-generation bioethanol. Xylose can be fermented by some other yeasts, bacteria or fungi although by-product formation or slow xylose conversion may limit their economic application for ethanol production [32, 34]. Recent research showed the potential of genetically engineering S. cerevisiae for the fermentation of xylose [10].
However, these intense treatments to release sugars also result in the formation of several undesired compounds in concentrations which may reduce the fermentation efficiency [9, 14, 18, 20, 37]. Most common inhibitors are weak acids such as levulinic acid, formic acid, acetic acid, furans such as 5-hydroxymethylfurfural (HMF) and furfural and phenolic compounds resulting from the lignin fraction such as vanillin [14, 21, 37]. Typical concentrations of these compounds in hydrolysates are very variable as these are dependent on the biomass source, as well as the treatment procedure and intensity [37].
Due to the experience using S. cerevisiae in other industrial fermentations and the large amount of knowledge that has been gathered this species is also the first choice for bioethanol production [5]. It is especially useful in first-generation bioethanol production due to its high ethanol yield and ethanol tolerance [38]. However, as outlined above, the fermentation environment in second-generation bioethanol production differs greatly from any previous fermentation. In addition, due to large diversity of biomass sources and hydrolysis techniques and the concomitant diversity of the resulting hydrolysate mixture composition, it is required to align the hydrolysate with a yeast with the ideal characteristics. Therefore, the natural diversity of yeasts should be further exploited to find yeasts with good ethanol yield in a fermentation medium containing high concentrations of glucose, containing a mixture of sugars such as glucose and xylose and/or a myriad of inhibitors. Surprisingly, so far only little is known on the relative ethanol yield of especially non-Saccharomyces yeasts under these conditions compared to S. cerevisiae.
In this study we examined several yeast species belonging to Candida, Starmerella, Metchnikowia, Pichia, Hanseniaspora, Torulaspora, Wickerhamomyces and Citeromyces which have been isolated from soil or sugar-rich habitats (floral nectar or sugar beet thick juice) for tolerance to inhibitors. Floral nectar and sugar beet thick juice are known for their low water activity (aw <0.9) due to high sugar concentrations and typically contain a limited number of specialized, xerotolerant yeasts [26]. In addition, nectar is also known for its diverse sugar composition [31]. In contrast to these sugar-rich habitats, soil contains a wide variety of different microorganisms. First, a large culture collection was screened for tolerance to osmotic stress, ethanol and HMF. Subsequently, tolerance to weak acids and furfural was examined on a selection of tolerant strains. Finally, 1.1 l fermentation experiments with 25 % glucose and experiments mimicking lignocellulosic hydrolysates were performed using the most promising strains and ethanol yield was recorded.
Materials and methods
Culture collection
A culture collection was constructed consisting of 56 yeast strains previously isolated from soil, plant nectar and sugar beet thick juice, i.e. an intermediate product from beet sugar production (Table 1) [17, 19]. Except for soil, these habitats are known to be low in microbial diversity due to high osmotic stress. In total, 39 nectar isolates were included in this study, representing isolates from Candida bombi (14 isolates), Hanseniaspora uvarum (5), Metchnikowia reukauffii (11) and Starmerella bombicola (9). C. bombi and M. reukauffii were isolated from nectar of the same flower [17]. Further, the collection consisted of 12 isolates from beet sugar thick juice, representing isolates of Citeromyces matritensis (5), Torulaspora delbrueckii (3) and Wickerhamomyces anomalus (4). From soil one Pichia kudriavzevii isolate, one T. delbrueckii isolate and three Metchnikowia pulcherrima were included. Identifications were based on sequence analysis of the D1/D2 region of the large ribosomal subunit after PCR on the DNA extract [25] using primers NL1 and NL4 [24]. PCR conditions were as follows: 2 min at 94 °C, 35 cycli of 45 s at 94 °C, 45 s at 55 °C and 45 s at 72 °C, followed by 10 min at 72 °C using Titanium Taq (Clontech Laboratories, USA). Identification was performed by BLAST analysis in GenBank. To evaluate the phenotypic profile of these isolates in bioethanol production, a commercial S. cerevisiae strain currently used in bioethanol fermentation (Ethanol Red) and a ‘wild’ strain from oak (SCOak50) were used as a reference. All strains were stored in Yeast extract Peptone Dextrose (YPD) broth containing 25 % glycerol at −80 °C.
Phenotypic profiling
First, the whole culture collection was screened on solid agar plates for a number of desirable traits, including osmotolerance (glucose 40–70 % w/v), ethanol tolerance (5–15 % v/v) and HMF tolerance (2–7 g l−1) as described by Mukherjee et al. [28]. Briefly, a basic growth medium (control medium) was prepared using bacto peptone 2 % w/v (BD), yeast extract 1 % w/v (LabM), glucose 2 % w/v and agar 1.5 % w/v (Invitrogen). Further, test media were prepared containing the same basic composition as the control medium, but supplemented with the test compounds. Agar plates were prepared using Singer PlusPlates designed for use with the Singer ROTOR HDA robot (Singer Instruments, UK). Next, the 96-well plate containing the strains stored at −80 °C was thawed, spotted using the HDA robot on control medium containing 2 % glucose and incubated at 30 °C for 2 days. Next, a 96-well plate containing 150 µl of liquid control medium in each well was inoculated with the strains using the robot and incubated overnight at 30 °C at 900 rpm for preculturing. In case of screening for ethanol tolerance, strains were precultured for 48 h in liquid control medium with 2 % v/v ethanol for preconditioning. Then, optical density at 600 nm (OD600) was measured using a microplate reader (Molecular Devices, USA) and the cell density was manually adjusted to OD600 ≈ 0.2. This plate was used as the source plate for spotting the test plates with the HDA rotor. After 5 days of incubation at 30 °C all test plates were scanned using a high-definition scanner (Seiko Epson, Japan) and processed using ImageJ [1], combined with the ScreenMill software [11] especially developed to quantify the colony size of each isolate on the plates. Relative growth was calculated as the growth at a certain test condition relative to the growth on the control medium. Growth under a test condition is only considered when the relative growth exceeds 5 % of the growth on the control medium.
In a second phase, the most promising strains (i.e. strains with good ethanol and HMF tolerance) were further evaluated for their growth in 2 % w/v xylose liquid yeast extract bactopeptone (YP) medium. Growth in 2 % xylose medium was evaluated by measuring the OD after 24 h of incubation at 30 °C in comparison with their growth in liquid medium containing 2 % glucose. Additionally, tolerance to weak acids and furfural, which are important inhibitors related to lignocellulosic hydrolysates was assessed. The assay was conducted in liquid medium using the OmniLog incubator/reader (Biolog, USA) which records colour development due to metabolic activity. The assay was adapted from the general protocol as supplied by the manufacturer (Biolog, USA). The assay was performed in a 96-well plate in a total volume of 120 µl growth medium, consisting of yeast extract (10 g l−1), bacto peptone (20 g l−1), 6 % w/v glucose and Biolog dye D (0.5× tetrazolium redox dye) [13, 35]. Inhibitors were added at a concentration ranging from 10 to 40 mM for acetic acid (0.625–0.5 g l−1) and from 5 to 20 mM for furfural (0.48–1.92 g l−1), vanillin (0.76–3.04 g l−1), formic acid (0.13–0.5 g l−1) and levulinic acid (0.58–2.3 g l−1). Prior to inoculation isolates were overnight pregrown on solid YPD agar and suspended in sterile demineralized water to an OD600 of 0.2. Next, 125 µl was added to 3 ml sterile water of which then 90 µl was used as inoculum. The plates were incubated in the OmniLog instrument at 30 °C and the colour development (due to the production of formazan from tetrazolium) at 36 h was recorded. Tolerance values were expressed relative to the activity without any inhibitors.
Fermentation potential of selected isolates in high gravity and lignocellulosic medium
Finally, these most promising isolates (one isolate from M. pulcherrima, P. kudriavzevii, T. delbrueckii, W. anomalus) were subjected to small-scale fermentations (1.1 l) to estimate their ability to produce ethanol under high gravity (25 % glucose) and lignocellulosic hydrolysate stress. As a reference the S. cerevisiae strains Ethanol Red and SCoak50 were included. Both strains had previously been shown to have an excellent tolerance profile (Table 1) [28]. Isolates were precultured overnight in 5 ml YP medium containing 2 % glucose, followed by inoculation in 300 ml YP medium containing 10 % glucose and incubation at 30 °C, 150 rpm for 2 days until stationary phase. Next, OD600 was measured and a volume of it was harvested by centrifugation (5 min at 3000 rpm) that represented OD600 ≈ 2.1 and OD600 ≈ 1.5 in 1.1 l high gravity and lignocellulosic hydrolysate stress fermentation medium, respectively. The latter fermentation medium consisted of 4.8 % w/v glucose, 6.2 % w/v xylose, 0.5 % w/v mannose, 0.5 % w/v galactose and 0.5 % w/v arabinose and an inhibitor concentration of 1.24 g l−1 HMF, 0.4 g l−1 furfural, 2.3 g l−1 acetic acid, 0.44 g l−1 formic acid, 0.87 g l−1 levulinic acid and 0.04 g l−1 vanillin as described by Koppram et al. [21]. Concentrations are within the range tested in the liquid assay test. Batch fermentations were carried out using Eppendorf BioFlo reactors at a pH of 4.5, 30 °C, 300 rpm and saturated with air at the start of the fermentation. After the start of the fermentation dissolved oxygen was not further controlled and dropped quickly due to fermentation activity. During the fermentation OD600 was measured frequently and 1 ml samples of the fermentation medium were taken, centrifuged and concentrations of ethanol, glucose and xylose in the supernatant were quantified using high-performance liquid chromatography (HPLC) (Waters® isocratic BreezeTM HPLC, ion exchange column WAT010290). Column temperature was maintained at 75 °C, and 5 mM H2SO4 was used as eluent with a flow rate of 1 ml min−1. A refractive index detector (Waters 2410, Waters, Milford, MA, USA) was used to detect the compounds of interest.
Results
Tolerance differences between yeast species of different genera
In general, the non-Saccharomyces cerevisiae isolates were more tolerant to high glucose concentrations (>55 %) than the two selected S. cerevisiae reference isolates (Table 1). These were previously shown to be among the top 20 most osmotolerant isolates from a collection of 280 S. cerevisiae isolates [28]. Among the isolates from nectar, C. bombi isolates showed the highest tolerance to glucose with an average relative growth (relative to the growth on 2 % glucose) of 23 % at a concentration of 55 % glucose, and 24 % at both 60 and 70 % glucose. None of the nectar isolates from other genera, even when isolated from the same type of plant nectar, managed to grow at this concentration. Second best among the nectar yeasts was S. bombicola with 24 % relative growth at 55 % glucose, 18 at 60 % glucose, but none of the isolates did grow at 70 % glucose (Table 1). Among the isolates from sugar beet thick juice, all isolates of C. matritensis managed to grow up to 60 % glucose (25 % relative growth), and three out of five isolates showed minor growth at 70 % glucose. In contrast, the maximal glucose concentration at which isolates of W. anomalus and T. delbrueckii isolates could grow was 55 % (28 and 29 % relative growth, respectively, Table 1). P. kudriavzevii (soil) and H. uvarum (nectar) represented the least glucose-tolerant non-Saccharomyces species and were able to grow up to 48 and 50 % glucose, respectively (Table 1). As expected, S. cerevisiae strains were most tolerant to ethanol, tolerating 13 % (SCOak50) and 14 % (Ethanol Red) ethanol. P. kudriavzevii isolated from soil was tolerant to 13 % ethanol (Table 1). Non-Saccharomyces cerevisiae isolates showed considerable lower ethanol tolerance up to only 11 % v/v, with M. reukauffi, M. pulcherrima and H. uvarum showing no growth from 7 % v/v ethanol onwards. At 10 % and 11 % ethanol only W. anomalus (18 % relative growth) and 1 T. delbrueckii isolate (5 %), all isolated from thick juice, were able to grow (Table 1). C. bombi and P. kudriavzevii isolates were the most tolerant to HMF as 42 and 39 % relative growth was recorded at 7 g l−1 HMF, respectively. Other isolates did not manage to grow at this concentration, except for S. cerevisiae SCOak50 (Table 1). However, at a more relevant HMF concentration of 4 g l−1 15 isolates did not manage to grow, i.e. all C. matritensis isolates, 7 M. reukauffii isolates and 1 C. bombi, H. uvarum and T. delbrueckii. All W. anomalus (69 %), M. pulcherrima and S. bombicola strains (62 % growth) were able to grow (Table 1). M. reukauffii isolates showed variable tolerance, with four out of 11 isolates growing at 4 g l−1 HMF (17 % growth), while the others did only grow up to 2 g l−1. Surprisingly, while the two M. pulcherrima isolates from soil showed 132 % growth at 4 g l−1, one did not grow at higher concentrations and the other one only 13 % at 5 g l−1 (Table 1).
Growth on xylose and tolerance to weak acids of selected yeast strains
Due to their very low ethanol (<10 % v/v ethanol) and/or HMF tolerance isolates of C. bombi, H. uvarum, S. bombicola, C. matritensis and M. reukauffii were abandoned for further experiments as they have not the appropriate features for bioethanol production. From the species W. anomalus, M. pulcherrima, T. delbrueckii and P. kudriavzevii we selected 1 strain with the largest tolerance to glucose, ethanol and HMF (Table 2), and also both reference S. cerevisiae isolates were included. Growth in xylose medium was slower for all tested isolates compared to growth in glucose medium. Non S. cerevisae isolates grew generally better on xylose than S. cerevisiae strains (<5 %), especially W. anomalus PA G2, T. delbrueckii 167TD and P. kudriavzevii 230PK, with growth >20 % compared to growth in 2 % glucose medium (Table 2). Tolerance to weak acids was good for all strains as at least 80 % relative metabolic activity was recorded at the highest tested concentrations for all tested weak acids (Table 2). T. delbrueckii 167TD and P. kudriavzevii 230PK showed highest tolerance to furfural, with recorded values of about 40 % relative metabolic activity at 15 mM furfural (1.44 g l−1), while the other strains showed <10 % activity. Nevertheless, at 5 mM, only M.pulcherrima 230MP and T. delbrueckii 167TD, showed considerable decrease in activity (30 % decrease). Both S. cerevisiae strains and W. anomalus 061P AG2 showed the best tolerance to vanillin with recorded values of 90–100 % activity at 5 mM (0.76 g/l), respectively, while the other strains showed at least 50 % reduction (Table 2). No activity was recorded at 10 mM vanillin for any of the strains.
Bioethanol production under high gravity and lignocellulosic hydrolysate stress
Ethanol yield was recorded in 25 % glucose fermentation medium. It was observed that S. cerevisiae and W. anomalus PA G2 yielded the highest ethanol concentrations (g ethanol/g glucose), up to the theoretical maximum of 50 % (Table 3) which corresponds to 14 % v/v ethanol. The other yeast isolates yielded 26–38 % ethanol corresponding to 9–12 % v/v. Similar trends were observed for the lignocellulosic hydrolysate fermentations. There was no difference in ethanol yield in the presence and absence of inhibitors for all isolates, except for M. pulcherrima 230MP which did not yield any ethanol under inhibitor stress (Table 3). S. cerevisiae and W. anomalus PA G2 yielded the highest ethanol concentrations up to 61 % of the total C6 sugars in the medium. Whereas both S. cerevisiae strains reached this value within 22 h (the first sampling point), W. anomalus PA G2 needed more time both in the absence (within 42 h) and the presence (within 88 h) of inhibitors (Table 3 and Fig. 1). At the time point with the maximal ethanol yield, about 10 % of the xylose has been consumed by S. cerevisiae, probably because it was consumed for growth (Fig. 1, details not shown). W. anomalus PA G2 consumed 17 % of the xylose in the absence of inhibitors and only 8 % in the presence of inhibitors. The greatest decrease of xylose concentration was observed when glucose was still present and before the maximal ethanol yield was achieved (Fig. 1).
Discussion
Currently, S. cerevisiae is the organism of choice for fermentation processes producing ethanol [5]. However, bioethanol production from high sugar concentration feedstocks (such as maize, sugar beet) and lignocellulosic hydrolysates confronts the yeast with new challenges which were previously not encountered in any of the known fermentations [29, 38]. These include high ethanol tolerance and osmotolerance in case of high sugar feedstocks and tolerance to osmotic stress and a myriad of inhibitors in case of lignocellulosic hydrolysates. Also, the fermentation of xylose which cannot be performed by non-genetically engineered S. cerevisiae is important in the latter case. Exploiting the natural diversity of yeasts might expand the yeast strain repertoire with suitable characteristics for bioethanol fermentation. Some studies previously investigated the potential of non-S. cerevisiae yeasts. Huang et al. [16] and Cho et al. [8] showed that Scheffersomyces stipitis, a xylose fermenting yeast, had a poor growth rate when inhibitors were present. Blomqvist et al. [6] studied a Dekkera bruxellensis strain with better tolerance to inhibitors compared to a S. cerevisiae strain, and both strains had a comparable ethanol yield. Delgenes et al. [9] compared the effects of inhibitors on ethanol production by S. cerevisiae, Zymomonas mobilis, Pichia stipitis and Candida sheatae. Zha et al. [36] isolated W. anomalus strains from grass silage that were tolerant to inhibitors. In this study we investigated yeasts isolated from a less commonly studied habitat, i.e. plant nectar and sugar beet thick juice (an intermediate product of sugar production stored in tanks) for their potential to tolerate osmostress, ethanol and HMF as lignocellulosic hydrolysate inhibitor and for their fermentation capacity. Nectar and sugar beet thick juice are known to house several yeast species which are less commonly isolated from typical habitats such as water or soil [2, 26]. In addition, these environments are rather distinct from typical habitats as they contain high concentrations of sugars and/or a myriad of different sugars [12, 26] and are, therefore, microbially less diverse compared to other environmental habitats.
Our results, as summarized in Table 1, showed that M. reukauffii, H. uvarum and S. bombicola isolates, isolated from nectar, showed poor characteristics for bioethanol fermentation, even for low sugar feedstocks, due to a low ethanol tolerance with growth being severely impaired from 5 % v/v onwards. Also C. matritensis isolates isolated from sugar beet thick juice showed poor ethanol tolerance. In addition, the low HMF tolerance of these four species would impede their use in the fermentation of lignocellulosic hydrolysates. C. bombi isolates from nectar, however, showed a very good osmotolerance (up to 70 %) and HMF tolerance (up to 7 g l−1). However, its low ethanol tolerance might impede its use in bioethanol fermentation of first generation and even of lignocellulosic hydrolysates as ethanol concentrations of 5 % are readily obtained during fermentation. Similar conclusions can be drawn for three out of four T. delbrueckii isolates; however, they have a lower tolerance to HMF than C. bombi. One T. delbrueckii showed better ethanol and HMF tolerance and was, therefore, selected for further experiments. The most promising species is W. anomalus. Although its osmotolerance and HMF tolerance to high concentrations is generally lower than C. bombi isolates, it is still good at relevant concentrations for bioethanol production. In addition, ethanol tolerance is much better than C. bombi with growth still recorded up to 11 % ethanol. W. anomalus isolate PA G2 also performed best on xylose (Table 2). This suggests that W. anomalus might be interesting for the fermentation of xylose in lignocellulosic hydrolysates. Zha et al. [36] previously identified W. anomalus isolates as good candidates for lignocellulosic hydrolysate fermentation as they showed good resistance to HMF and other inhibitors and growth on xylose as carbon source. In addition, W. anomalus might be an interesting species in unsterile fermentations due to its killer activity and biocontrol activity which outcompetes other microorganism during fermentation, such as lactic acid bacteria or other yeasts [30].
Next to tolerance to fermentation inhibitors ethanol yield is also an important parameter. Therefore, we conducted fermentation experiments under controlled conditions using Bioflo bioreactors and measured glucose, xylose and ethanol during the course of the experiment. A high sugar medium containing 25 % glucose and an artificial lignocellulosic hydrolysate medium was used to test 4 strains selected based on their tolerance. Two S. cerevisiae strains were included as reference, since this species is known for its excellent ethanol yield [33]. One strain is used as industrial bioethanol strain; the other strain is a natural strain isolated from oak and not domesticated for use in fermentation processes. The concentrations of the individual inhibitors in the lignocellulosic hydrolysate medium were similar to the concentrations that did not impaire metabolic activity in the liquid assay. Our results confirmed the excellent ethanol yield of S. cerevisiae compared to other species (Table 3). Both strains yielded an ethanol concentration close to the theoretically maximal yield based on C6 sugars (51 %), while the ethanol yield for the selected M. pulcherrima, T. delbrueckii and P. kudriavzevii strains ranged from 26 to 38 %. The selected W. anomalus strain also yielded 50 % ethanol per g glucose. This is in agreement with the study of Passoth et al. [30] that showed that W. anomalus has a good ethanol yield. Both S. cerevisiae and W. anomalus also showed good ethanol tolerance during these fermentation (up to 14 %v/v ethanol), which is essential in high gravity fermentation. Similar trends were observed in the lignocellulosic hydrolysate medium without inhibitors containing about 20 % total sugars. No effect of the presence of inhibitors on the ethanol yield was observed for any of the strains except for M. pulcherrima which yielded no ethanol in the presence of inhibitors. Both S. cerevisiae strains performed equally well with the oak-derived strain even more tolerant to HMF, showing that good bioethanol production strains for both first- and second-generation biomass might be omnipresent in nature. In contrast to the 25 % glucose fermentation, ethanol yield was above the theoretical value of 51 %. Conversion of inhibitors to ethanol is unlikely explaining this, because this is also observed in the absence of inhibitors. Conversion of C5 sugars to ethanol might explain this; however, this is not expected for S. cerevisiae that also showed increased ethanol yield. The ethanol yield of the W. anomalus strain was similar to that of both S. cerevisiae strains; however, the presence of inhibitors decreased the rate of ethanol production. This shows that W. anomalus might be interesting as bioethanol production strain for lignocellulosic hydrolysates if it is able to ferment xylose to ethanol. However, when pregrown on glucose it was shown that xylose was consumed along with glucose consumption, but once glucose was depleted xylose consumption decreased. This intermittent xylose consumption of W. anomalus was also observed by Zha et al. [36] and Kurtzman [23] and contributed to the lack of oxygen present. This might suggest that xylose was not converted to ethanol during the first stage either, but rather used for aerobic growth. Indeed, the ethanol yield based on C6 sugars was similar to both S. cerevisiae strains which do not ferment xylose. Pregrowth of W. anomalus on 10 % xylose did not make any difference in ethanol production and xylose or glucose consumption during fermentation compared to pregrowth on 10 % glucose (data not shown). Similar ethanol yields were obtained and only 10 % of xylose was consumed.
References
Abramoff MD, Magalhaes PJ, Ram SJ (2004) Image processing with ImageJ. Biophotonics Int 11(7):36–42
Álvarez-Pérez S, Herrera CM (2013) Composition, richness and nonrandom assembly of culturable bacterial–microfungal communities in floral nectar of Mediterranean plants. FEMS Microbiol Ecol 83(3):685–699. doi:10.1111/1574-6941.12027
Bai FW, Anderson WA, Moo-Young M (2008) Ethanol fermentation technologies from sugar and starch feedstocks. Biotechnol Adv 26(1):89–105. doi:10.1016/j.biotechadv.2007.09.002
Barnett JA (1976) The utilization of sugars by yeasts. Adv Carbohydr Chem Biochem 32:125–234. doi:10.1016/S0065-2318(08)60337-6
Basso LC, De Amorim HV, De Oliveira AJ, Lopes ML (2008) Yeast selection for fuel ethanol production in Brazil. FEMS Yeast Res 8(7):1155–1163. doi:10.1111/j.1567-1364.2008.00428.x
Blomqvist J, South E, Tiukova L, Momeni MH, Hansson H, Ståhlberg J, Horn SJ, Schnürer J, Passoth V (2011) Fermentation of lignocellulosic hydrolysate by the alternative industrial ethanol yeast Dekkera bruxellensis. Lett Appl Microbiol 53(1):73–78. doi:10.1111/j.1472-765X.2011.03067.x
Campbell JE, Block E (2010) Land-use and alternative bioenergy pathways for waste biomass. Environ Sci Technol 44(22):8665–8669. doi:10.1021/es100681g
Cho DH, Shin SJ, Bae Y, Park C, Kim YH (2011) Ethanol production from acid hydrolysates based on the construction and demolition wood waste using Pichia stipitis. Bioresour Technol 102(6):4439–4443. doi:10.1016/j.biortech.2010.12.094
Delgenes JP, Moletta R, Navarro JM (1996) Effects of lignocellulose degradation products on ethanol fermentations of glucose and xylose by Saccharomyces cerevisiae, Zymomonas mobilis, Pichia stipitis, and Candida shehatae. Enzyme Microb Technol 19(3):220–225. doi:10.1016/0141-0229(95)00237-5
Demeke M, Dietz H, Li Y, Foulquié-Moreno M, Mutturi S, Deprez S, Den Abt T, Bonini B, Lidén G, Dumortier F, Verplaetse A, Boles E, Thevelein J (2013) Development of a D-xylose fermenting and inhibitor tolerant industrial Saccharomyces cerevisiae strain with high performance in lignocellulose hydrolysates using metabolic and evolutionary engineering. Biotechnol Biofuels 6(1):89
Dittmar J, Reid R, Rothstein R (2010) ScreenMill: a freely available software suite for growth measurement, analysis and visualization of high-throughput screen data. BMC Bioinf 11(1):353. doi:10.1186/1471-2105-11-353
Gonzalez-Teuber M, Heil M (2009) Nectar chemistry is tailored for both attraction of mutualists and protection from exploiters. Plant Sig Behav 4(9):809–813. doi:10.4161/psb.4.9.9393
Greetham D, Wimalasena T, Kerruish DWM, Brindley S, Ibbett RN, Linforth RL, Tucker G, Phister TG, Smart KA (2014) Development of a phenotypic assay for characterisation of ethanologenic yeast strain sensitivity to inhibitors released from lignocellulosic feedstocks. J Ind Microbiol Biotechnol 41(6):931–945. doi:10.1007/s10295-014-1431-6
Hahn-Hägerdal B, Galbe M, Gorwa-Grauslund MF, Lidén G, Zacchi G (2006) Bio-ethanol—the fuel of tomorrow from the residues of today. Trends Biotechnol 24(12):549–556. doi:10.1016/j.tibtech.2006.10.004
Hamelinck CN, Faaij APC (2006) Outlook for advanced biofuels. Energy Policy 34(17):3268–3283. doi:10.1016/j.enpol.2005.06.012
Huang C-F, Lin T-H, Guo G-L, Hwang W-S (2009) Enhanced ethanol production by fermentation of rice straw hydrolysate without detoxification using a newly adapted strain of Pichia stipitis. Bioresour Technol 100(17):3914–3920. doi:10.1016/j.biortech.2009.02.064
Jacquemyn H, Lenaerts M, Brys R, Willems K, Honnay O, Lievens B (2013) Among-population variation in microbial community structure in the floral nectar of the bee-pollinated forest herb Pulmonaria officinalis L. PLoS ONE 8(3):e56917. doi:10.1371/journal.pone.0056917
Jonsson L, Alriksson B, Nilvebrant N-O (2013) Bioconversion of lignocellulose: inhibitors and detoxification. Biotechnol Biofuels 6(1):16
Juste A, Lievens B, Frans I, Klingeberg M, Michiels CW, Willems KA (2008) Present knowledge of the bacterial microflora in the extreme environment of sugar thick juice. Food Microbiol 25(6):831–836. doi:10.1016/j.fm.2008.04.010
Klinke HB, Thomsen AB, Ahring BK (2004) Inhibition of ethanol-producing yeast and bacteria by degradation products produced during pre-treatment of biomass. Appl Microbiol Biotechnol 66(1):10–26. doi:10.1007/s00253-004-1642-2
Koppram R, Albers E, Olsson L (2012) Evolutionary engineering strategies to enhance tolerance of xylose utilizing recombinant yeast to inhibitors derived from spruce biomass. Biotechnol Biofuels 5(1):32
Kumar P, Barrett DM, Delwiche MJ, Stroeve P (2009) Methods for Pretreatment of Lignocellulosic Biomass for Efficient Hydrolysis and Biofuel Production. Ind Eng Chem Res 48(8):3713–3729. doi:10.1021/ie801542g
Kurtzman CP (1998) Pichia EC, HE Kurtzman. The yeasts, a taxonomic study, Fourth edition, 5th edn. Elsevier BV, Amsterdam, The Netherlands. doi:10.1016/b978-044481312-1/50046-0
Kurtzman CP, Robnett CJ (1997) Identification of clinically important ascomycetous yeasts based on nucleotide divergence in the 5’ end of the large-subunit (26S) ribosomal DNA gene. J Clin Microbiol 35(5):1216–1223
Lievens B, Brouwer M, Vanachter ACRC, Lévesque CA, Cammue BPA, Thomma BPHJ (2003) Design and development of a DNA array for rapid detection and identification of multiple tomato vascular wilt pathogens. FEMS Microbiol Lett 223(1):113–122. doi:10.1016/S0378-1097(03)00352-5
Lievens B, Hallsworth JE, Pozo MI, Belgacem ZB, Stevenson A, Willems KA, Jacquemyn H (2014) Microbiology of sugar-rich environments: diversity, ecology, and system constraints. Env Microbiol. doi:10.1111/1462-2920.12570
Limayem A, Ricke SC (2012) Lignocellulosic biomass for bioethanol production: current perspectives, potential issues and future prospects. Prog Energ Combust Sci 38(4):449–467. doi:10.1016/j.pecs.2012.03.002
Mukherjee V, Steensels J, Lievens B, Van de Voorde I, Verplaetse A, Aerts G, Willems KA, Thevelein JM, Verstrepen KJ, Ruyters S (2014) Phenotypic evaluation of natural and industrial Saccharomyces yeasts for different traits desirable in industrial bioethanol production. Appl Microbiol Biotechnol (ahead of print). doi: 10.1007/s00253-014-6090-z
Palmqvist E, Hahn-Hagerdal B (2000) Fermentation of lignocellulosic hydrolysates. II: inhibitors and mechanisms of inhibition. Bioresour Technol 74(1):25–33. doi:10.1016/s0960-8524(99)00161-3
Passoth V, Fredlund E, Druvefors UA, Schnurer J (2006) Biotechnology, physiology and genetics of the yeast Pichia anomala. FEMS Yeast Res 6(1):3–13. doi:10.1111/j.1567-1364.2005.00004.x
Pozo MI, Lievens B, Jacquemyn H (2014) Impact of microorganisms on nectar chemistry, pollinator attraction and plant fitness. In: nectar: production, chemical composition and benefits to animals and plants. Nova Science Publishers, Inc., New York
Toivola A, Yarrow D, van den Bosch E, van Dijken JP, Scheffers WA (1984) Alcoholic Fermentation of d-Xylose by Yeasts. Appl Environ Microbiol 47(6):1221–1223
van Maris AJA, Abbott DA, Bellissimi E, van den Brink J, Kuyper M, Luttik MAH, Wisselink HW, Scheffers WA, van Dijken JP, Pronk JT (2006) Alcoholic fermentation of carbon sources in biomass hydrolysates by Saccharomyces cerevisiae: current status. Antonie Van Leeuwenhoek 90(4):391–418. doi:10.1007/s10482-006-9085-7
Waites MJ, Morgan NL, Rockey JS, Higton G (2001) Industrial microbiology: an introduction. 1st edn. Blackwell, Oxford
Wimalasena T, Greetham D, Marvin M, Liti G, Chandelia Y, Hart A, Louis E, Phister T, Tucker G, Smart K (2014) Phenotypic characterisation of Saccharomyces spp. yeast for tolerance to stresses encountered during fermentation of lignocellulosic residues to produce bioethanol. Microb Cell Fact 13(1):47
Zha Y, Hossain AH, Tobola F, Sedee N, Havekes M, Punt PJ (2013) Pichia anomala 29X: a resistant strain for lignocellulosic biomass hydrolysate fermentation. FEMS Yeast Res 13(7):609–617. doi:10.1111/1567-1364.12062
Zha Y, Muilwijk B, Coulier L, Punt P (2012) Inhibitory Compounds in Lignocellulosic Biomass Hydrolysates during Hydrolysate Fermentation Processes. J Bioprocess Biotech 2 (112). doi: 10.4172/2155-9821.1000112
Zhao XQ, Bai FW (2009) Mechanisms of yeast stress tolerance and its manipulation for efficient fuel ethanol production. J Biotechnol 144(1):23–30. doi:10.1016/j.jbiotec.2009.05.001
Acknowledgments
The authors would like to thank Marijke Lenaerts for help with sampling yeasts from nectar, Laetitia Six for help with sampling the bioreactors outside regular office hours, Ado Van Assche for assistance with Omnilog, Jan Steensels and Tim Snoeck for providing assistance with the Singer HDA robot and Françoise Dumortier for providing assistance with HPLC analysis. This work was funded by the IOF-KP/10/002 granted by KU Leuven.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ruyters, S., Mukherjee, V., Verstrepen, K.J. et al. Assessing the potential of wild yeasts for bioethanol production. J Ind Microbiol Biotechnol 42, 39–48 (2015). https://doi.org/10.1007/s10295-014-1544-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10295-014-1544-y