Abstract
In this work, rapid carbothermal reduction of silica in a homemade electric arc furnace is reported to produce silicon carbide intended for photovoltaic applications. The influence of carbothermal conditions on the composition and size of the obtained particles is studied. We demonstrate that the variation of the temperature and the atmosphere makes it possible to produce 3C-SiC powders during a short time. Morphological properties of the elaborated SiC powder were investigated using laser granulometry and scanning electron microscopy (SEM). The obtained samples are composed of agglomerated particles of different shapes with micrometric sizes. X-ray diffraction (XRD), fourier transform infrared (FTIR), and Raman spectroscopy analyses show that carbothermal reduction of silica depends on the experimental conditions. Especially, the sample elaborated during 120 s at 1700 °C under CO atmosphere does not present any SiO2 peaks but only pure crystallized cubic silicon carbide (β-SiC) with crystallite size around 44 nm as a result of a complete carbo-reduction of silica. The purity of synthesized SiC is investigated by inductively coupled plasma atomic emission spectrometry (ICP-AES) giving rise to purity about 97.9927%.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
L Carassiti (2011) Synthesis of silicon carbide ceramics by novel microwave methods, PhD thesis
Sarro PM (2000) Silicon carbide as a new MEMS technology. Sensors & Actuators A 82:210–218
Jiang L, Cheung R, Hedley J, Hassan M, Harris AJ, Burdess JS, Mehregany M, Zorman CA (2006) SiC cantilever resonators with electrothermal actuation. Sensors & Actuators A 128:376–386
Meenakshi CH (2011) Synthesis of nano-structured 3C-SiC by carbothermal reduction of silicon bearing gel and carbon soot. Materials letter 65:2161–2164
Pang Q, Xu L, Ju Z, Xing Z, Yang L, Hao Q, Qian Y (2010) 3C-SiC nanowires and micro-scaled polyhedra: synthesis, characterization and properties. J Alloys Compd 501:60–66
Yang XY, Huang ZW, Wu YK, Ye HQ (2001) HREM observations of the synthesized proces of nano-sized SiC by ball milling of Si and C mixed powders. Materials Science Engineering A 300:278–283
M Barbouche, M Hajji, F Krout, H Ezzaouia (2015) Elaboration and characterization of metallurgical silicon for photovoltaic applications. J Phys Conf Ser. 596
M Barbouche, M Hajji, R Chtourou, H Ezzaouia (2015) Electric arc furnace design and construction for metallurgical and semiconductor research. Int J Adv Manuf Technol
Wang K, Cheng YB, Wang H (2009) Growth of SiC whiskers by carbothermal reduction of mesoporous silica-carbon composites infiltrated with SiC nuclei. J Aust Ceram Soc 45(1):10–12
Guo X, Zhu L, Li W, Yang H (2013) Preparation of SiC powders by carbothermal reduction with bamboo charcoal as renewable carbon source. Journal of Advanced Ceramics 2(2):128–134
Shin Y, Wang C, Exarhos GJ (2005) Synthesis of SiC ceramics by the carbothermal reduction of mineralized wood with silica. Adv Mater 17:73–77
Zhang H, Ding W, Li M (2010) Synthesis and characterization of crystalline silicon carbide nanoribbons. Nanoscale Res Lett 5(8):1264–1271
Moshtaghioun BM, Poyato R, Rodriguez AD (2012) Rapid carbothermic synthesis of silicon carbide nano powders by using microwave heating. Journal of European ceramic society 32(8):1787–1794
M Khalifa, M Hajji, H Ezzaouia (2012) Impurity removal process for high-purity silica production by acid leaching. EDP Sciences
Rajarao R, Ferreira R (2014) Synthesis of silicon carbide nanoparticles by using electronic waste as a carbon source. Mater Lett 120:65–68
Moshtaghioun BM, Monshi A, Abbasi MH, Karimzadeh F (2011) A study on the effects of silica particle size and milling time on synthesis of silicon carbide nanoparticles by carbothermic reduction. J Refract Met Hard Mater 29:645–650
Monshi A, Foroughi MR, Monshi MR (2012) Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD. World Journal of Nano Science and Engineering 2:154–160
Dehghanzadeh M, Ataie A, Heshmati-Manesh S (2012) Synthesis of nanosize silicon carbide powder by carbothermal reduction of SiO2. International Journal of Modern Physics: Conference Series 5:263–269
Uwe H, Neil G (2011) The Scherrer equation versus the ‘Debye-Scherrer equation’. Nat Nanotechnol 6(9):534
Prabhakaran PV (2009) Silicon carbide wires of nano to sub-micron size from phenol-furfuraldehyde resin. Jouranl Mater Sci 44:528–533
Janz S (2006) Amorphous silicon carbide for photovoltaic applications. In: Masters physics. Fraunhofer Institut, Freiburg, p. 22
Manocha LM, Yasuda E, Tanabe Y, Manocha S, Vashistha D (2000) Sol–gel processing of carbidic glasses. Bull Mater Sci 23:1–4
Liao LS, Bao XM, Yang ZF, Min NB (1995) Intense blue emission from porous β-SiC formed on C + implanted silicon. Appl Phys Lett 66:2382–2384
Wasyluk J, Perova TS (2010) Raman investigation of different polytypes in SiC thin films grown by solid-gas phase epitaxy on Si (111) and 6H-SiC substrates. Materials Science Forum Vols 645-648:359–362
Alessi A, Agnello S, Buscarino G, Gelardi FM (2013) Structural properties of core and surface of silica nanoparticles investigated by Raman spectroscopy. J Raman Spectrosc 44:810–816
Kingma KJ, Hemley RJ (1994) Raman spectroscopic study of microcrystalline silica. Am Mineral 79:269–273
Qiang X, Li H, Zhang Y, Tian S, Wei J (2013) Synthesis and Raman scattering of SiC nanowires decorated with SiC polycrystalline nanoparticles. Materials Letter 107:315–317
Jeong J, Chung GS (2008) Raman scattering investigation of polycrystalline 3C-SiC film deposited on SiO2 by using APCVD with hexamethyldisilane. Journal of the Korean Physical Society 52:45
JY Zhou, ZY Chen, M Zhou, XP Gao, EQ Xie (2009) SiC nanorods grown on electrospun nanofibers using Tb as catalyst: fabrication, characterization, and photoluminescence properties. Nanoscale Res Lett
Martin I, Vetter M, Garin M, Orpella A, Voz C, Puigdollers J, Alcubilla R (2005) Crystalline silicon surface passivation with amorphous SiCx: H films deposited by plasma-enhanced chemical-vapor deposition. J Appl Phys 98:114912
Wang L, Peng Y, Hu X, Xu X (2013) Combustion synthesis of high purity SiC powder by radio-frequency heating. Ceram Int 39:6867–6875
Augustine G, Balakrishna V, Brandt CD (2001) Growth and characterization of high-purity SiC single crystals. J Cryst Growth 211:339–342
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Barbouche, M., Benabderrahmane Zaghouani, R., Benammar, N.E. et al. Synthesis and characterization of 3C-SiC by rapid silica carbothermal reduction. Int J Adv Manuf Technol 91, 1339–1345 (2017). https://doi.org/10.1007/s00170-016-9838-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9838-z