Zusammenfassung
Häufig werden Drehrohröfen oder Drehrohrreaktoren aufgrund der guten Durchmischung des Feststoffs und der damit verbundenen einheitlichen Produktqualität für die chemische Umsetzung von Feststoffen verwendet. Neben der eigentlichen Reaktion treten eine Vielzahl von Stoff- und Wärmetransporteinflüssen auf, die bei der Auslegung des Reaktors und der Produkterzeugung berücksichtigt werden müssen.
Similar content being viewed by others
Literatur
Aguado, J., Serrano, D., Escola, J., Garagorri, E.: Catalytic conversion of low-density polyethylene using a continuous screw kiln reactor. Catal. Today 75(1–4), 257–262 (2002). https://doi.org/10.1016/S0920-5861(02)00077-9
Blücher, H.V.: Drehrohrofen für die Aktivkohleherstellung, DE102004036109A1 (2004)
Boateng, A.A.: Rotary Kilns: Transport Phenomena and Transport Processes. Elsevier/Butterworth-Heinemann, Amsterdam (2008)
CEMBUREAU.: „BESTAVAILABLE TECHNIQUES“ FOR THE CEMENT INDUSTRY. In: CEMBUREAU (Hrsg.) The European Cement Association Brussels, N° Editeur: D/1999/5457/December (1999)
Dahmen, N., Henrich, E., Dinjus, E., Weirich, F.: The bioliq® bioslurry gasification process for the production of biosynfuels, organic chemicals, and energy. Energy Sustain. Soc. 2(1), 3 (2012). https://doi.org/10.1186/2192-0567-2-3
Do, D.H., Specht, E.: Numerical simulation of heat and mass transfer of limestone decomposition in normal shaft kiln. In: ASME/JSME 2011 8th Thermal Engineering Joint Conference, ASME, Honolulu/USA, 13–17 March 2011, T10060-T10060-10. 2011. (2011). https://doi.org/10.1115/AJTEC2011-44578
Doraiswamy, L.K., Kulkarni, B.D.: Gas-Solid Noncatalytic Reactions: in: Chemical Reaction and Reactor Engineering. Chemical Industries, Bd. 26. Dekker, New York (1987)
Duda, W.H.: Cement-Data-Book: [zweisprachig], 3. Aufl. Bauverl, Wiesbaden (1985)
Emig, G., Klemm, E.: Technische Chemie: Einführung in die Chemische Reaktionstechnik; mit 47 Tabellen, 5 Springer-Lehrbuch. Springer, Berlin/Heidelberg (2005)
Engelhardt, A.: Erstellung eines Modells zur Vorhersage von Produktverteilungen aus der katalytischen Spaltung von Braunkohle. Laufende Dissertation (2020)
Engelhardt, A., Stam-Creutz, T., Hahn, T., Seitz, M.: Vorhersage von Produktausbeuten für unterschiedliche Reaktortypen bei der katalytischen Pyrolyse. Chem. Ing. Tech. 90(5), 660–665 (2018). https://doi.org/10.1002/cite.201700148
FEECO International Green Bay.: THE ROTARY KILN HANDBOOK (2018)
Gehrmann, H.-J.: Mathematische Modellierung und experimentelle Untersuchungen zur Pyrolyse von Abfällen in Drehrohrsystemen – Dissertation, Weimar (2005)
Gerthsen, T.: Anorganische Chemie für Werkstoffe und Verfahren. Chemie im Maschinenbau,/Tarsilla Gerthsen; 1. Universitätsverlag Karlsruhe, Karlsruhe (2006)
Ginsberg, T.: Dynamische Modellierung von Drehrohröfen. Dissertation – Aachen (2011)
Grzella, J., Sturm, P., Krüger, J., Reuter, A. Markus, Kögler, C., Probst, T.: Metallurgical Furnaces. In: Ullmann’s Encyclopedia of Industrial Chemistry (2012)
Gupta, P., Saha, R.K.: Analysis of gas-solid noncatalytic reactions in porous particles: Finite volume method Int. J. Chem. Kinet. 36(1), 1–11 (2004). https://doi.org/10.1002/kin.10168
Heiligenstaedt, W.: Wärmetechnische Berechnungen für Industrieöfen, 4. Aufl. Verlag Stahleisen, Essen (1966)
Henein, H., Brimacombe, J.K., Watkinson, A.P.: Experimental study of transverse bed motion in rotary kilns. MTB. 14(2), 191–205 (1983). https://doi.org/10.1007/BF02661016
Herz, F.: Entwicklung eines mathematischen Modells zur Simulation thermischer Prozesse in Drehrohröfen. Zugl.: Magdeburg, Univ., Fak. für Verfahrens- und Systemtechnik, Dissertation, Docupoint Wissenschaft. l (2012)
Herz, F., Specht, E.: Simulation of lime burning in rotary kilns. Cem. Int. 3, 40–49 (2017)
Heschel, W., Appelt, J.: Katalytische Drehrohrpyrolyse von Braunkohle. In: Krzack, S., et al. (Hrsg.) Stoffliche Nutzung von Braunkohle. Springer, Berlin. ISBN 978-3-662-46250-8 (2018)
Heschel, W., Müller, D.: Kohlenstoffadsorbentien – Stand und Entwicklungsrichtungen. In: Freiberger Forschungshefte: A 845: Energietechnik (1998)
Heydenrych, M.D.: Modelling of Rotary Kilns. Dissertation – (PROEFSCHRIFT). Twente (2001)
Heydenrych, M.D., Schieke, J., Heesink, A., Kuipers, J.: Diffusion effects in rotating rotary kilns. S A J. Chem. Eng. 13(1), 17–28 (2001)
Kenny, M., Oates, T.: Lime and limestone in: Ullmann’s encyclopedia of industrial chemistry. In: Shaw, M.T. (Hrsg.) Introduction to Polymer Rheology, S. 1–14. Wiley, Hoboken (2012)
Li, S.: Reaction Engineering. Butterworth-Heinemann an imprint of Elsevier, Oxford, UK/Cambridge, MA (2017)
Liu, X.Y., Specht, E.: Mean residence time and hold-up of solids in rotary kilns. Chem. Eng. Sci. 61(15), 5176–5181 (2006). https://doi.org/10.1016/j.ces.2006.03.054
Liu, X.Y., Specht, E., Mellmann, J.: Slumping – rolling transition of granular solids in rotary kilns. Chem. Eng. Sci. 60(13), 3629–3636 (2005). https://doi.org/10.1016/j.ces.2005.02.020
Mackay, D.M., Roberts, P.V.: The influence of pyrolysis conditions on yield and microporosity of lignocellulosic chars. Carbon 20(2), 95–104 (1982). https://doi.org/10.1016/0008-6223(82)90413-4
Mellmann, J.: The transverse motion of solids in rotating cylinders-forms of motionand transition behavior. Powder Technol. 118, 251–270 (2001)
Missen, R.W., Mims, C.A., Saville, B.A.: Introduction to Chemical Reaction Engineering and Kinetics. Wiley, New York (1999)
Moffat, W., Walmsley, M.R. (Hrsg.): Understanding Lime Calcination Kinetics for Energy Cost Reduction: Pre-symposium [of] 59th APPITA annual conference and exhibition, incorporating 13th ISWFPC, International Symposium on Wood, Fibre and Pulping Chemistry : Rotorua, New Zealand, 12 – 13 May 2005; proceedings In: Appita Conference and Exhibition (59th : 2005 : Auckland, N.Z.). 59th Appita Annual Conference and Exhibition: Incorporating the 13th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry), Auckland, New Zealand, 16–19 May 2005: Proceedings. Carlton, Vic.: Appita Inc., 2005: 487–494. Australian Pulp and Paper Industry Technical Association, Carlton, VIC (2005)
Morgano, M.T., Leibold, H., Stapf, D., Seifert, H. (Hrsg.): Klärschlammverwertung mit einem innovativen Pyrolysereaktor – eine techno-ökonomische Betrachtung. Berliner Abfallwirtschafts- und Energiekonferenz, Berlin, Germany. Energie aus Abfall, Band 14. TK Verl. Karl Thomé-Kozmiensky, Neuruppin (2017)
Müller, D.: Herstellung von kohlenstoffhaltigen Adsorbentien aus polymeren Ausgangsprodukten unter Anwendung eines neuentwickelten Pyrolysereaktors (2000)
Narsimhan, G.: Thermal decomposition of calcium carbonate. Chem. Eng. Sci. 16(1–2), 7–20 (1961). https://doi.org/10.1016/0009-2509(61)87002-4
Sai, P.S.T., Surender, G.D., Damodaran, A.D., Suresh, V., Philip, Z.G., Sankaran, K.: Residence time distribution and material flow studies in a rotary kiln. MTB. 21(6), 1005–1011 (1990). https://doi.org/10.1007/BF02670271
Schlünder, E.U.: Vacuum Contact Drying of Free Flowing Mechanically Agitated Particulate Material. Springer, Berlin/Heidelberg (1985)
Schlünder, E.-U., Mollekopf, N.: Vacuum contact drying of free flowing mechanically agitated particulate material. Chem. Eng. Process. Process Intensif. 18(2), 93–111 (1984). https://doi.org/10.1016/0255-2701(84)85012-6
Schmalfeld, J.: Lurgi-Ruhrgas-Verfahren (LR) In: Die Veredlung und Umwandlung von Kohle Schmalfeld Jörg (Hrsg.): Technologien und Projekte 1970 bis 2000 in Deutschland; [Laufzeit des Projektes: 01.04.2005 – 31.03.2008], Hamburg (2008)
Seitz, M., Nowak, S., Welscher, J., Zimmermann, J., Nägler, T., Stam-Creutz, T., Frank, W., Schwieger, W.: Katalysatorscreening für die katalytische Spaltung von Braunkohle. Chem. Ing. Tech. 85(4), 529–534 (2013). https://doi.org/10.1002/cite.201200222
Seitz, M., Heschel, W., Nägler, T., Nowak, S., Zimmermann, J., Stam-Creutz, T., Frank, W., Appelt, J., Bieling, S., Meyer, B.: Influence of catalysts on the pyrolysis of lignites. Fuel. 134, 669–676 (2014). https://doi.org/10.1016/j.fuel.2014.05.042
Seitz, M., Schwieger, W., Hahn, T., Appelt, J., Heschel, W., Nowak, S., Zimmermann, J., Stam-Creutz, T., Nägler, T., Welscher, J., Knothe, J., Riedel, L.: Katalytische Spaltung von Braunkohle. In: Krzack, S., et al. (Hrsg.) Stoffliche Nutzung von Braunkohle. Springer-Verlag GmbH Deutschland, ein Teil von Springer Nature (2018)
Silva, H., Romero, J., Venturini, R., González, J.: Heat transfer studies in natural carbonates from San Juan (Argentina). Thermochim. Acta. 360(2), 169–178 (2000). https://doi.org/10.1016/S0040-6031(00)00571-2
Specht, E.: Wärme- und Stoffübertragung in der Thermoprozesstechnik: Grundlagen, Berechnungen, Prozesse. Edition GWI – EWI International. Vulkan-Verl, Essen (2014)
Specht, E., Becker, F.H. (Hrsg.): Drehrohröfen: K.-H. Grote, J. Feldhusen (Hrsg.) Dubbel, 24. Aufl. Springer, Berlin/Heidelberg (2014)
Sprung, S.: Introduction. In: Shaw, M.T. (Hrsg.) Introduction to Polymer Rheology, S. 1–14. Wiley, Hoboken (2012)
Sullivan, J.D., Maier, C.G., Ralson, O.C.: Passage of Solid Particles through Rotary cylindrical kilns: U.S. Bureau of Mines Technical U.S. Bureau of Mines Technical Paper (384) (1927)
Szekely, J., Evans, J.W., Sohn, H.Y.: Reactions of nonporous solids. In: Gas-Solid Reactions, S. 65–107. Elsevier, Oxford (1976)
Tsai, T.: Disproportionation and transalkylation of alkylbenzenes over zeolite catalysts. Appl. Catal. A Gen. 181(2), 355–398 (1999). https://doi.org/10.1016/S0926-860X(98)00396-2
Valipour, M.S., Saboohi, Y.: Modeling of multiple noncatalytic gas-solid reactions in a moving bed of porous pellets based on finite volume method. Heat Mass Transf. 43(9), 881–894 (2007). https://doi.org/10.1007/s00231-006-0154-2
Vogel, R.: Die Schüttgutbewegung in einem Modell-Drehrohr als Grundlage für die Auslegung und Beurteilung von Drehrohröfen, Teil I und II; Wissenschaftliche Zeitschrift der Hochschule für Architektur und Bauwesen Weimar, 12(1), Weimar, (1965)
Weiß, S. (Hrsg.): Verfahrenstechnische Berechnungsmethoden, 1. Aufl. VCH Verl.-Ges, Weinheim (1987)
Zimmermann, J.: Entwicklung eines kontinuierlichen Reaktorsystems zur katalytischen Spaltung von Braunkohle auf Basis labortechnischer Untersuchungen. Halle (2018)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer-Verlag GmbH Deutschland, ein Teil von Springer Nature
About this entry
Cite this entry
Seitz, M., Hoffmann, C. (2018). Reaktoren für Fluid-Feststoff-Reaktionen: Drehrohröfen. In: Reschetilowski, W. (eds) Handbuch Chemische Reaktoren. Springer Reference Naturwissenschaften . Springer Spektrum, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-56444-8_26-1
Download citation
DOI: https://doi.org/10.1007/978-3-662-56444-8_26-1
Received:
Accepted:
Published:
Publisher Name: Springer Spektrum, Berlin, Heidelberg
Print ISBN: 978-3-662-56444-8
Online ISBN: 978-3-662-56444-8
eBook Packages: Springer Referenz Naturwissenschaften