Abstract
A cross-linking agent is one of the important additives in the plastic industry. Cross-linking agents have an effect on the physical and mechanical properties of the polymers. In general, the curing or cross-linking process is an irreversible process. The cross-linking of polymer which is done by cross-linkers through covalent bond enables to control the physical and mechanical (i.e., impact and resistance of cracking) properties of the obtained polymer for commercial or scientific purposes. At the beginning of the entry, some important definitions as cross-link and cross-linking density were summarized. The types of cross-linking agents were discussed in detail in the entry. Then, some interesting items were discussed as there are cross-linking agents utilized in the plastic industry without external stimuli and others that need external stimuli (i.e., thermal or photo-irradiation, etc.), the latter of which are called latent curing agents. The common latent cross-linking agents based on imidazole are mentioned, and its working mechanism in the curing process is shown in the entry. The selection of the appropriate cross-linker was mentioned through discussion of the cross-linking agents based on the functional groups present on the polymer such as amine or anhydride groups. Consequently, the illustration of the function group should be present on the polymer needed to cure. For example, cross-linking agents based on polyamines were utilized with polymers that have epoxide, thiirane or methylene chloride, or ketone groups. The former cross-linking based on compounds have amino, the working mechanisms of each cross-linking agent were illustrated in detail. At the end of entries, cross-linking of important daily used plastic by different cross-linking agents was discussed such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polyurethane (PU), and polyepoxide (epoxy).
Similar content being viewed by others
References
Amariutei OA, Ramsdale-Capper R, Álvarez MC, Chan LKY, Foreman JP (2018) Modelling the properties of a difunctional epoxy resin cured with aromatic diamine isomers. Polymer 156(7):203–213
Anbarasan R, Babot O, Maillard B (2004) Cross-linking of high-density polyethylene in the presence of organic peroxides. J Appl Polym Sci 93:75–81
Arimitsu K, Fuse S, Kudo K, Furutani M (2015) Imidazole derivatives as latent curing agents for epoxy thermosetting resins. Mater Lett 161:408–410
Atta AM (2003) Epoxy resin based on poly(ethylene terephthalate) waste: synthesis and characterization. Prog Rubber Plast Recycl Technol 19(1):17–40
Biju R, Nair CPR (2013) Synthesis and characterization of shape memory epoxy-an hydride system. J Polym Res 20:82–92
Chaudhary BI, Sengupta SS, Cogen JM, Curto M (2011) Silane grafting and moisture cross-linking of polypropylene. Polym Eng Sci 51(2):237–246
Chino K, Suga K, Ikawa M, Satoh H (2001) Novel rapid-cure adhesives for low temperature using Thiirane compound. J Appl Polym Sci 82:2953–2957
Chiu Y-C, Huang C-C, Tsai H-C, Prasannan A, Toyoko I (2013) Effect of aromatic and aliphatic amines as curing agents in sulfone epoxy monomer curing process. Polym Bull 70:1367–1382
Chodák I (1999) Chapter. Cross-linking of polypropylene. In: Polypropylene, volume 2 of the series. Polymer science and technology series. Springer, Dordrecht, pp 128–134
Choi HK, Choi BG, Lee YY, Na JS (2015) Cationic catalyst as latent curing agent for epoxy resin. Appl Mech Mater 749:126–128
Chung Y-C, Choi JW, Moon S, Chun BC (2009) Effect of cross-linking agent structure on the shape memory property of polyurethane block copolymer. Fiber Polym 10(4):430–436
Costa ML, Pardini LC, Rezende MC (2005) Influence of aromatic amine hardeners in the cure kinetics of an epoxy resin used in advanced composites. Mater Res 8(1):65–70
Fedoseev MS, Derzhavinskaya LF, Valeev NS, Chulanova SN, Yampol’skaya VD (2008) Curing of epoxy oligomers by the eutectic mixture of aromatic amines. Polym Sci Ser D Glues Sealing Mater 1(1):41–43
Fedoseev MS, Derzhavinskaya LF, Strel’nikov VN (2010) Curing of epoxy-anhydride formulations in the presence of imidazoles. Russ J Appl Chem 83(8):1408–1412
Fedoseev MS, Gruzdev MS, Derzhavinskaya LF (2014) 1-Butyl-3-methylimidazolium salts as new catalysts to produce epoxy-anhydride polymers with improved properties. Int J Polym Sci 2014:Article ID 607341, 8 pages
Ferdosian F, Yuan Z, Anderson M, (Charles) Xu C (2015) Sustainable lignin-based epoxy resins cured with aromatic and aliphatic amine curing agents: Curing kinetics and thermal properties. Thermochim Acta 618:48–55
Fraga F, Vazquez EC, Rodríguez-Núñez E, Martínez-Ageitos JM (2008) Curing kinetics of the epoxy system diglycidyl ether of bisphenol A/isophoronediamine by Fourier transform infrared spectroscopy. Polym Adv Technol 19, 1623–1628
Francis B, Rao VL, Jose S, Catherine BK, Ramaswamy R, Jose J, Thoma S (2006) Poly(ether ether ketone) with pendent methyl groups as a toughening agent for amine cured DGEBA epoxy resin. J Mater Sci 41:5467–5479
García L, Morales G, Avalos BF, Acunã P (2013) Use of the trifunctional cyclic initiator, DEKTP, as the radical initiator in the modification of poly(propylene) in the presence of different branching/cross-linking co-agents. Macromol Symp 325–326:213–219
García-Quesada JC, Marcilla A, Gilbert M (2001) Thermal degradation of silane crosslinked unplasticized PVC. J Anal Appl Pyrolysis 60(2):159–177
Ghasemi I, Morshedian J (2003) The effect of co-agent on the peroxide cross-linking of LDPE. Iran Polym J 12(2):119–125
Gilbert M, Garci’a-Quesada JC (1999) Cross-linking of rigid poly(vinyl chloride). Plast Rubber Compos 28(3):125–130
Gilbert MD, Schneider NS, MacKnight WJ (1991) Mechanism of the dicyandiamide/epoxide reaction. Macromolecules 24(2):360–369
González MG, Cabanelas JC, Pozuelo J, Baselga J (2011) Preparation of cycloaliphatic epoxy hybrids with non-conventional amine-curing agents. J Therm Anal Calorim 103(2):717–723
Gooch JW (2011) Polyurethane. In: Gooch JW (ed) Encyclopedic dictionary of polymers. Springer, New York
Gunewardena A, Gilbert M (2008) Peroxide cross-linking of rigid poly(vinyl chloride). J Vinyl Addit Technol 14(3):92–98
Ham YR, Kim SH, Shin YJ, Lee DH, Yang M, Min JH, Shin JS (2010) A comparison of some imidazoles in the curing of epoxy resin. J Ind Eng Chem 16(4):556–559
Hara O (1990) Curing agents for epoxy resin. Three Bond Technical News Issued
Hartshorn SJ (1986) Durability of adhesive joints in structural adhesives. Plenum Press, New York, ISBN 978-1-4684-7781-8
Kelnar I, Schatz M (1993) Silane cross-linking of PVC. II. Influence of silane type and conditions on cross-linking by water. J Appl Polym Sci 48:669–676
Kim TH, Kim DY, Lim CS, Seo BK (2017) Studies of the physical properties of cycloaliphatic epoxy resin reacted with anhydride curing agents. Key Eng Mater 737:248–255
Kolář F, Svítilová J (2007) Kinetics and mechanism of curing epoxy/anhydride systems. Acta Geodyn Geomater 4(3)(147):85–92
Kudo K, Furutani M, Arimitsu K (2015) Imidazole derivatives with an intramolecular hydrogen bond as thermal latent curing agents for thermosetting resins ACS. Macro Lett 4(10):1085–1088
Kumar A, Ujjwal RR, Mittal A, Bansal A, Ojha U (2014) Polyacryloyl hydrazide: an efficient, simple, and cost effective precursor to a range of functional materials through hydrazide based click reactions. ACS Appl Mater Interfaces 6(3):1855–1865
Lendlein A, Kelch S (2002) Shape memory polymers. Angew Chem Int Ed 41:2034–2057
Li L, Chen X, He B (2007) Cross-linking of rigid poly(vinyl chloride) with epoxysilane. J Vinyl Addit Technol 13(2):103–109
Li J, Wang B, Chen K, Tian X, Zeng J, Xu J, Gao W (2017) The use of lignin as cross-linker for polyurethane foam for potential application in adsorbing materials. BioRes 12(4):8653–8671
Liu H, Chuai C, Iqbal M, Wang H, Kalsoom BB, Khattak M, Khattak MQ (2011) Improving foam ability of polypropylene by cross-linking. J Appl Polym Sci 122:973–980
López-Barajas F, Ramos-DeValle LF, Sánchez-Valdes S, Ramírez-Vargas E, Martínez-Colunga G, Espinoza-Martínez AB, Flores-Gallardo S, Mendez-Nonell J, Morales-Cepeda AB, Lozano-Ramirez T, Beltrán-Ramírez FI (2019) Curing kinetics of diglycidyl ether of bisphenol-A epoxy system using a tertiary amine, through the study of its rheometric characteristics. Polym Test 73:346–351
Luo Y, Zou J, Li J, Zou H, Liang M (2018) Effect of crosslinking agent on properties and morphology of water-blown semirigid polyurethane foam. J Appl Polym Sci 135(42):1953–1959
Mallick PK (1997) Composites engineering handbook. Marcel Dekker, New York, p 121
Massingill JL, Bauer RS (2000) Epoxy Resins. Applied Polymer Science: 21st Century, Pergamon, 393–424, ISBN 9780080434179
Meloa RP, Aguiara VO, Marques MFV (2015) Silane crosslinked polyethylene from different commercial PE’s: influence of comonomer, catalyst type and evaluation of HLPB as cross-linking coagent. Mater Res 18(2):313–319
Miller (1995) Introduction to plastics and composites: mechanical properties and engineering applications. Volume 101 of Mechanical engineering. Marcel Dekker, INC. New York: CRC Press, pp 122–143
Minsker KS, Kolesov SV, Zaikov GE (1995) Degradation and stabilization of vinyl chloride-based polymers. Pergamon, Oxford, p 76, 1998.
Mori A, Kitayama T, Takatani M, Okamoto T (2004) A honeymoon-type adhesive for wood products based on acetoacetylated poly(vinyl alcohol) and diamines: effect of diamines and degree of acetoacetylation. J Appl Polym Sci 91:2966–2972
Nikolic G, Zlatkovic S, Cakic M, Cakic S, Lacnjevac C, Rajic Z (2010) Fast Fourier transform IR characterization of epoxy GY systems crosslinked with aliphatic and cycloaliphatic EH polyamine adducts. Sensors 10:684–696
Paulmer RDA, Shah CS, Patni MJ, Pandya MV (1991) Effect of crosslinking agents on the structure and properties of polyurethane millable elastomer composites. J Appl Polym Sci 43, 1953–1959
Petrie EM (2006) Epoxy adhesive formulations. McGraw-Hill chemical engineering. McGraw-Hill, New York, p 62
Ray P (2011) Polymer cross-linkling. In: Encyclopedia of polymer science and technology. https://doi.org/10.1002/0471440264.pst400
Rocks J, George GA, Vohwinkel F (2003) Curing kinetics and thermomechanical behaviour of co-anhydride cured aminoglycidyl epoxy resins. Polym Int 52:1758–1766
Saethre B, Gilbert M (1996) Peroxide cross-linking of plasticized poly(vinyl chloride). Polymer 37(15):3379–3386
Song G, Yang S, Yang C, She X (2006) Foaming polypropylene prepared by a novel one-step silane-grafting and cross-linking method. J Porous Mater 13:297–301
Su WF, Huang HW, Pan WP (2002a) Thermal properties of rigid rod epoxies cured with diaminodiphenylsulfone and dicyandiamide. Thermochim Acta 392–393:391–394
Su WF, Lee YC, Pan WP (2002b) Thermal properties of phthalic anhydride- and phenolic resin-cured rigid rod epoxy resins. Thermochim Acta 392–393:395–398
Suyama S, Ishigaki H, Watanabe Y, Nakamura T (1995) Cross-linking of polyethylene by dicumyl peroxide in the presence of 2,4-diphenyl-4-methyl-1-pentene. Polym J 27(4):371–375
Tamboli SM, Mhaske ST, kale DD (2004) Cross-linking polyethylene. IJCT 11:853–864
Thomas NL, Zheng X (2007) Peroxide cross-linking of rigid poly(vinyl chloride). J Appl Polym Sci 103(5):2904–2909
Tomuta AM, Ramis X, Ferrando F, Serra A (2012) The use of dihydrazides as latent curing agents in diglycidyl ether of bisphenol-A coatings. Prog Org Coat 74:59–66
Tötsch W, Gaensslen H (1992) Poly (vinylchloride): environmental aspects of a common plastic. Elsevier Applied Science, London/New York. ISBN 1-85166-774-1
Varma IK, Gupta VB (2000) 2.01 – Thermosetting Resin–Properties. Comprehensive Composite Materials, Pergamon, 1–56, ISBN 9780080429939
Wang J, Xu YZ, Fu YF, Liu XD (2016) Latent curing systems stabilized by reaction equilibrium in homogeneous mixtures of benzoxazine and amine. Sci Rep 6:Article number: 38584
Wang Y, Liu W, Qiu Y, Wei Y (2018) A one-component, fast-cure, and economical epoxy resin system suitable for liquid molding of automotive composite parts. Materials (Basel) 11(5):685–696
Wlodarska M, Maj A, Mossety-Leszczak B, Bak GW, Galina H, Okrasa L, Izdebski M (2013) Liquid crystal epoxy resins based on biphenyl group cured with aromatic amines – studied by dielectric spectroscopy. J Polym Res 20:227–234
Wu F, Zhou X, Yu X (2018) Reaction mechanism, cure behavior and properties of a multifunctional epoxy resin, TGDDM, with latent curing agent dicyandiamide. RSC Adv 8:8248–8258
Xie M, Zhang Z, Gu Y, Li M, Su Y (2009) A new method to characterize the cure state of epoxy prepreg by dynamic mechanical analysis. Thermochim Acta 487:8–17
Xiong C, Yao C (2009) Synthesis, characterization and application of triethylenetetramine modified polystyrene resin in removal of mercury, cadmium and lead from aqueous solutions. Chem Eng J 155:844–850
Yadav RP, Gope PC, Sah PL (2007) Mechanical and thermal properties of acrylic hydrazide cured epoxy; in-situ polymerization experimental analysis of nano and engineering materials and structures. Springer: Springer Netherlands. Print ISBN: 978-1-4020-6238-4. Electronic ISBN: 978-1-4020-6239-1
Yang B, Mao Y, Zhang Y, Bian G, Zhang L, Wei Y, Jiang Q, Qiu Y, Liu W (2019) A novel liquid imidazole-copper (II) complex as a thermal latent curing agent for epoxy resins. Polymer 178:121586
Yin GT, Rong MZ, Zhang MQ, Yang GC (2007) Self-healing epoxy composites – preparation and effect of the healant consisting of microencapsulated epoxy and latent curing agent. Compos Sci Technol 67(2):201–212
Yu Q, Zhu S (1999) Peroxide cross-linking of isotactic and syndiotactic polypropylene. Polymer 40(11):2961–2968
Zadhoush A, Esmaeili M, Ghaeli I (2009) Cross-linking of plasticized PVC used in coated fabrics. J Vinyl Addit Technol 15(2):108–112
Zhang C, Liu X, Cheng J, Zhang J (2015) Study on curing kinetics of diglycidyl 1,2-cyclohexane dicarboxylate epoxy/episulfide resin system with hexahydro-4-methylphthalic anhydride as a curing agent. J Therm Anal Calorim 120(3):1893–1903
Zhou S, Hu M, Hu Y, Wang Z (2009) Influence of coagents on the silane grafting and cross-linking of polypropylene. Polym Plast Technol Eng 48(2):193–200
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2020 Springer-Verlag GmbH Germany, part of Springer Nature
About this entry
Cite this entry
Soliman, S.M.A. (2020). Cross-Linking Agents. In: Polymers and Polymeric Composites: A Reference Series. Polymers and Polymeric Composites: A Reference Series. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-37179-0_82-2
Download citation
DOI: https://doi.org/10.1007/978-3-642-37179-0_82-2
Received:
Accepted:
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-37179-0
Online ISBN: 978-3-642-37179-0
eBook Packages: Springer Reference Chemistry and Mat. ScienceReference Module Physical and Materials ScienceReference Module Chemistry, Materials and Physics
Publish with us
Chapter history
-
Latest
Cross-Linking Agents- Published:
- 05 June 2020
DOI: https://doi.org/10.1007/978-3-642-37179-0_82-2
-
Original
Cross-Linking Agents- Published:
- 13 November 2019
DOI: https://doi.org/10.1007/978-3-642-37179-0_82-1