Abstract
Water injection is used for increasing the recovery factor as well as the reservoir’s life time. Although this method improves the production efficiency, however, its performance has been enhanced using some procedures. One of these methods is surfactant injection into the oil reservoirs by the water injection process. In this study, the flow rate of the produced oil was improved by injection of amphoteric surfactant (coco amido propyl betaine) at different concentrations (1,000, 2,500, 5,000 and 7,500 ppm). Next, the morphology of water and surfactant was screened on the sand-packed matrix using spiral CT-scanner. According to that CT images, the in situ phenomena during water or surfactant injection were captured. The FTIR-ATR tests were performed on the samples of the process of water and surfactant injection. The experimental results revealed that the injection of the above-mentioned surfactant (at concentration of 1,000 ppm) increased the recovery factor up to 40%. Likewise, the injection of the above-mentioned amphoteric surfactant reduced the interfacial tension of oil and reservoir’s rock, leading to more oil recovery. The extraction time was increased in the presence of the above-mentioned surfactant owing to the postponed stage of water breakthrough. The above-mentioned surfactant in the process of water injection improved the oil production from the sand-packed matrix.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Pourabdollah K., Zarringhalam Moghaddam A., Kharrat R., Mokhtari B.: Improvement of heavy oil recovery in the VAPEX process using montmorillonite nanoclays. Oil Gas Sci. Technol. 66, 1005–1016 (2011)
Loahardjo N., Xie X., Morrow N.R.: Oil recovery by sequential waterflooding of mixed-wet sandstone and limestone. Energy Fuels 24, 5073–5080 (2010)
Sayyafzadeh M., Pourafshary P., Haghighi M., Rashidi F.: Application of transfer functions to model water injection in hydrocarbon reservoir. J. Pet. Sci. Eng. 78, 139–148 (2011)
Ma S., Dong M., Li Z., Shirif E.: Evaluation of the effectiveness of chemical flooding using heterogeneous sandpack flood test. J. Pet. Sci. Eng. 55, 294–300 (2007)
Jamaloei B.Y.: Insight into the chemistry of surfactant-based enhanced oil recovery processes. Recent Patents Chem. Eng. 2, 1–10 (2009)
Kulkarni M., Bandyopadhyaya R., Sharma A.: Surfactant controlled switching of water-in-oil wetting behaviour of porous silica films grown at oil–water interfaces. Indian Acad. Sci. 6, 637–643 (2008)
Golabi E., Seyedeyn Azad F., Ayatollahi S.S., Hosseini S.N., Dastanian M.: Experimental study of anionic and cationic surfactants effects on reduce of ift and wettability alteration in carbonate rock. Int. J. Sci. Eng. Res. 3, 1–8 (2012)
Horvath-Szabo G., Czarnecki J., Masliyah J.H.: Sandwich structures at oil–water interfaces under alkaline conditions. J. Colloid Interface Sci. 253, 427–434 (2002)
Mai, A.; Bryan, J.; Goodarzi, N.; Kantzas, A.: Insights into non-thermal recovery of heavy oil. In: World Heavy Oil Conference, Beijing, China, Nov. 2006
Almalik M.S., Attia A.M.: Effects of surfactant flooding on the recovery of Safaniya crude oil of Saudi Arabia. J. Pet. Sci. Eng. 17, 367–376 (1997)
Gogoi S.B.: Characterization of vesicle for Enhanced Oil recovery. Indian J. Chem. Technol. 17, 282–290 (2010)
Thigpen, D.R.; Lawson, J.B.; Nelson, R.C. : Preformed surfactant-optimized aqueous alkaline flood. US Patent 5,068,043 (1991)
Rudin J., Bernard C., Wasan D.T.: Effect of added surfactant on interfacial tension and spontaneous emulsification in alkali/acidic oil systems. Ind. Eng. Chem. Res. 33, 1150–1158 (1994)
Qiao W., Dong L., Zhao Z., Yang J., Li, H. , Li Z.: Interfacial behavior of pure surfactants for enhanced oil recovery. Part 1: A study on the adsorption and distribution of methyl benzene sulfonate. Tenside Surfactant Deterg. 40, 87–89 (2003)
Zhao Z.K., Ba Y., Li Z., Qiao W., Cheng L.: Synthesis and interfacial behavior of decyl methylnaphthalene sulfonate (effect of parameters on DITmin, tmin, tul for flooding systems with strong and buffered alkaline). J. Pet. Sci. Technol. 24, 595–606 (2006)
Saffman P.G., Taylor G.I.: The penetration of a fluid in a porous medium or Hele-Shaw cell containing a more viscous fluid. Proc. R. Soc. J. 245, 312–329 (1958)
Li X.P., Yu L., Ji Y.Q., Wu B., Li G.Z., Zheng L.Q.: New type flooding systems in enhanced oil recovery. Chin. Chem. Lett. 20, 1251–1254 (2009)
Jennings H.Y., Johnson C.E., McAuliffe C.D.: caustic waterflooding process for heavy oils. J. Pet. Technol. 26, 1344–1352 (1974)
Okandan E.: Improvement of waterflooding of a heavy crude oil by addition of chemicals to the injection water. Soc. Pet. Eng. Am. Inst. Min. Metall. Pet. Eng. 6597, 27–28 (1977)
Deng S., Yu G., Jiangb Z., Zhang R., Ting Y.P.: Destabilization of oil droplets in produced water from ASP flooding. Colloids Surfaces 252, 113–119 (2004)
Sensoy T., Chenevert M.E., Sharma M.: minimizing water invasion in shales using nano particles. J. Soc. Pet. Eng. 18, 5–7 (2005)
EL-Batanoneney M., Abdel-Moghny Th., Ramzi M.: The effect of mixed surfactants on enhancing oil recovery. J. Surf. Deterg. 2, 201–205 (1999)
Mansoori G.A., Jiang T.S., Kawanaka S.: Asphaltene deposition and its role petroleum production and processing. Arab. J. Sci. Eng. 13, 17–33 (1988)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Anganaei, H., Pourabdollah, K. & Rostami, A. Experimental Improvement of Nano-Enhanced Oil Recovery Using Nano-Emulsions. Arab J Sci Eng 39, 6453–6461 (2014). https://doi.org/10.1007/s13369-014-1258-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-014-1258-5