Abstract
This paper presents a two stage optimization system to find optimal process parameters of multiple quality characteristics in plastic injection molding. Taguchi method, Back-Propagation Neural Network (BPNN), Genetic Algorithm (GA), and combination of Particle Swarm Optimization and Genetic Algorithm (PSO-GA) are used in this study to find optimum parameter settings. Melt temperature, injection velocity, packing pressure, packing time, and cooling time are selected as initial process parameters in the experiment. First, experimental work is conducted using Taguchi orthogonal array. According to the result from the Taguchi experiment, S/N ratio is calculated to find the best combination settings for product quality. Then, ANOVA is used to determine significant factors of the control parameters. Moreover, the S/N ratio predictor and quality predictor are constructed using BPNN. In the first stage optimization, S/N ratio predictor and GA are used to reduce variance of quality characteristic. In the second stage optimization, the S/N ratio predictor and quality predictor with hybrid PSO-GA are used to find optimal parameter settings for quality characteristic and stability of the process. Finally, three confirmation experiments are conducted to assess the effectiveness of the proposed system. Upon optimization, it is seen that the proposed system not only improves the quality of plastic parts, but also reduces variability of the process effectively.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Mostafa, J. J., Mohammad, M. A., and Ehsan, M., “A Hybrid Response Surface Methodology and Simulated Annealing Algorithm,” Proc. of International Conference on Computer Communication and Management, pp. 570–576, 2011.
Öktem, H., “Optimum Process Conditions on Shrinkage of an Injected-Molded Part of DVD-ROM Cover using Taguchi Robust Method,” The International Journal of Advanced Manufacturing Technology, Vol. 61, No. 5–8, pp. 519–528, 2012.
Oktem, H., Erzurumlu, T., and Uzman, I., “Application of Taguchi Optimization Technique in Determining Plastic Injection Molding Process Parameters for a Thin-Shell Part,” Materials & Design, Vol. 28, No. 4, pp. 1271–1278, 2007.
Shi, H., Xie, S., and Wang, X., “A Warpage Optimization Method for Injection Molding using Artificial Neural Network with Parametric Sampling Evaluation Strategy,” The International Journal of Advanced Manufacturing Technology, Vol. 65, No. 1–4, pp. 343–353, 2013.
Tzeng, C. J., Yang, Y. K., Lin, Y. H., and Tsai, C. H., “A Study of Optimization of Injection Molding Process Parameters for SGF and PTFE Reinforced PC Composites using Neural Network and Response Surface Methodology, The International Journal of Advanced Manufacturing Technology, Vol. 63, No. 5–8, pp. 691–704, 2012.
Kusić, D., Kek, T., Slabe, J. M., Sveèko, R., and Grum, J., “The Impact of Process Parameters on Test Specimen Deviations and their Correlation with AE Signals Captured during the Injection Moulding Cycle,” Polymer Testing, Vol. 32, No. 3, pp. 583–593, 2013.
Wang, X., Zhao, G., and Wang, G., “Research on the Reduction of Sink Mark and Warpage of the Molded Part in Rapid Heat Cycle Molding Process,” Materials & Design, Vol. 47, pp. 779–792, 2013.
Altan, M., “Reducing Shrinkage in Injection Moldings via the Taguchi, ANOVA and Neural Network Methods,” Materials & Design, Vol. 31, No. 1, pp. 599–604, 2010.
Fei, N. C., Kamaruddin, S., Siddiquee, A. N., and Khan, Z. A., “Experimental Investigation on the Recycled Hdpe and Optimization of Injection Moulding Process Parameters Via Taguchi Method,” International Journal, Vol. 6, No. 1, pp. 81–91, 2011.
Ozcelik, B. and Sonat, I., “Warpage and Structural Analysis of Thin Shell Plastic in the Plastic Injection Molding,” Materials & Design, Vol. 30, No. 2, pp. 367–375, 2009.
Sun, C. H., Chen, J. H., and Sheu, L. J., “Quality Control of the Injection Molding Process using an EWMA Predictor and Minimum-Variance Controller,” The International Journal of Advanced Manufacturing Technology, Vol. 48, No. 1–4, pp. 63–70, 2010.
Oktem, H., Erzurumlu, T., and Uzman, I., “Application of Taguchi Optimization Technique in Determining Plastic Injection Molding Process Parameters for a Thin-Shell Part,” Materials & Design, Vol. 28, No. 4, pp. 1271–1278, 2007.
Ozcelik, B., Ozbay, A., and Demirbas, E., “Influence of Injection Parameters and Mold Materials on Mechanical Properties of ABS in Plastic Injection Molding,” International Communications in Heat and Mass Transfer, Vol. 37, No. 9, pp. 1359–1365, 2010.
Chen, W. C., Fu, G. L., Tai, P. H., and Deng, W. J., “Process Parameter Optimization for MIMO Plastic Injection Molding Via Soft Computing,” Expert Systems with Applications, Vol. 36, No. 2, pp. 1114–1122, 2009.
Hao, Y., Hai, C., and Zhu, X., “Research Of Quality Control for Plastic Injection Gear based on CAE Technology,” Proc. of International Conference on Mechanic Automation and Control Engineering, pp. 3742–3747, 2010.
Xu, G., Deng, F., and Xu, Y., “Adaptive Particle Swarm Optimization-Based Neural Network in Quality Prediction for Plastic Injection Molding,” Journal of Computational Information Systems, Vol. 7, No. 2, pp. 462–470, 2011.
Berti, G. and Monti, M., “A Virtual Prototyping Environment for a Robust Design of an Injection Moulding Process,” Computers & Chemical Engineering, Vol. 54, pp. 159–169, 2013.
Dang, X. P. and Park, H. S., “Design of U-Shape Milled Groove Conformal Cooling Channels for Plastic Injection Mold,” Int. J. Precis. Eng. Manuf., Vol. 12, No. 1, pp. 73–84, 2011.
Ozcelik, B. and Erzurumlu, T., “Comparison of the Warpage Optimization in the Plastic Injection Molding using ANOVA, Neural Network Model and Genetic Algorithm,” Journal of Materials Processing Technology, Vol. 171, No. 3, pp. 437–445, 2006.
Park, H. S. and Dang, X. P., “Optimization of Conformal Cooling Channels with Array of Baffles for Plastic Injection Mold,” Int. J. Precis. Eng. Manuf., Vol. 11, No. 6, pp. 879–890, 2010.
Sun, B., Wu, Z., Gu, B., and Huang, X., “Optimization of Injection Molding Process Parameters based on Response Surface Methodology and Genetic Algorithm,” Proc. of 2nd International Conference on Computer Engineering and Technology, Vol. 5, pp. V5-397-V5-400, 2010.
Shi, H., Gao, Y., and Wang, X., “Optimization of Injection Molding Process Parameters using Integrated Artificial Neural Network Model and Expected Improvement Function Method,” The International Journal of Advanced Manufacturing Technology, Vol. 48, No. 9–12, pp. 955–962, 2010.
Ozcelik, B. and Erzurumlu, T., “Determination of Effecting Dimensional Parameters on Warpage of Thin Shell Plastic Parts using Integrated Response Surface Method and Genetic Algorithm,” International Communications in Heat and Mass Transfer, Vol. 32, No. 8, pp. 1085–1094, 2005.
Yin, F., Mao, H., Hua, L., Guo, W., and Shu, M., “Back Propagation Neural Network Modeling for Warpage Prediction and Optimization of Plastic Products during Injection Molding,” Materials & Design, Vol. 32, No. 4, pp. 1844–1850, 2011.
Chen, C. C., Su, P. L., and Lin, Y. C., “Analysis and Modeling of Effective Parameters for Dimension Shrinkage Variation of Injection Molded Part with Thin Shell Feature using Response Surface Methodology,” The International Journal of Advanced Manufacturing Technology, Vol. 45, No. 11–12, pp. 1087–1095, 2009.
Idoumghar, L., Melkemi, M., Schott, R., and Aouad, M. I., “Hybrid PSO-SA Type Algorithms for Multimodal Function Optimization and Reducing Energy Consumption in Embedded Systems,” Applied Computational Intelligence and Soft Computing, Vol. 2011, No. 3, pp. 1–12, 2011.
Mhamdi, B., Grayaa, K., and Aguili, T., “Hybrid of Particle Swarm Optimization, Simulated Annealing and Tabu Search for the Reconstruction of Two-Dimensional Targets from Laboratory-Controlled Data,” Progress In Electromagnetics Research B, Vol. 28, pp. 1–18, 2011.
Nakano, S., Ishigame, A., and Yasuda, K., “Consideration of Particle Swarm Optimization Combined with Tabu Search,” Electrical Engineering in Japan, Vol. 172, No. 4, pp. 31–37, 2010.
Song, X., Cao, Y., and Chang, C., “A Hybrid Algorithm of PSO and SA for Solving JSP,” Proc. of Fifth International Conference on Fuzzy Systems and Knowledge Discovery, pp. 111–115, 2008.
Zhang, Y. and Wu, L., “A Robust Hybrid Restarted Simulated Annealing Particle Swarm Optimization Technique,” Advances in Computer Science and its Applications, Vol. 1, No. 1, pp. 5–8, 2012.
Chen, W. C., Fu, G., and Kurniawan, D., “A Two-Stage Optimization System for the Plastic Injection Molding with Multiple Performance Characteristics,” Advanced Materials Research, Vol. 468–471, Chap. 1, pp. 386–390, 2012.
Kurtaran, H. and Erzurumlu, T., “Efficient Warpage Optimization of Thin Shell Plastic Parts using Response Surface Methodology and Genetic Algorithm,” The International Journal of Advanced Manufacturing Technology, Vol. 27, No. 5–6, pp. 468–472, 2006.
Reséndiz, E. and Rull-Flores, C. A., “Mahalanobis-Taguchi System Applied to Variable Selection in Automotive Pedals Components using Gompertz Binary Particle Swarm Optimization,” Expert Systems with Applications, Vol. 40, No. 7, pp. 2361–2365, 2013.
Wang, H. S., Wang, Y. N., and Wang, Y. C., “Cost Estimation of Plastic Injection Molding Parts through Integration of PSO and BP Neural Network,” Expert Systems with Applications, Vol. 40, No. 2, pp. 418–428, 2013.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, WC., Kurniawan, D. Process parameters optimization for multiple quality characteristics in plastic injection molding using Taguchi method, BPNN, GA, and hybrid PSO-GA. Int. J. Precis. Eng. Manuf. 15, 1583–1593 (2014). https://doi.org/10.1007/s12541-014-0507-6
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-014-0507-6