Abstract
In the plastic injection molding (PIM), the optimization of the process parameters is a complex task. The objective of this study is to propose an intelligent approach for efficiently optimizing PIM parameters when multiple objectives are involved, where different objectives, such as minimizing part weight, flash, or volumetric shrinkage, present trade-off behaviors. Multiple objective functions reflecting the product quality are constructed for the optimization model of PIM parameters. The proposed approach integrates Taguchi’s parameter design method, back-propagation neural network (BPNN), grey correlation analysis (GCA), particle swarm optimization (PSO) and multiobjective particle swarm optimization (MOPSO) to locate the Pareto optimal solution for multiobjective optimization problem. PSO and GCA are applied to optimize the network structure of BPNN to establish multiobjective mathematical model (PSO-GCANN) that finely maps the relationship between the input process parameters and output multiresponse. MOPSO is used to fine-tune the Pareto optimal solutions while the approximate PSO-GCANN is utilized to efficiently compute the fitness of every individual during the evolution of MOPSO. The illustrative application and comparison of results show that the proposed methodology outperforms the existing methods and can help mold designers to efficiently and effectively identify optimal process parameters.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Chen WC, Liou PH, Chou SC (2014) An integrated parameter optimization system for MIMO plastic injection molding using soft computing. Int J Adv Manuf Technol 73(9–12):1465–1474
Öktem H (2012) Optimum process conditions on shrinkage of an injected-molded part of DVD-ROM cover using Taguchi robust method. Int J Adv Manuf Technol 61(5–8):518–528
Chen CC, Su PL, Lin YC (2009) Analysis and modeling of effective parameters for dimension shrinkage variation of injection molded part with thin shell feature using response surface methodology. Int J Adv Manuf Technol 45(11–12):1087–1095
Yin F, Mao H, Hua L, Guo W, Shu M (2011) Back-propagation neural network modeling for warpage prediction and optimization of plastic products during injection molding. Mater Des 32:1844–1850
Gao YH, Wang XC (2009) Surrogate-based process optimization for reducing warpage in injection molding. J Mater Process Tech 209(3):1302–1309
Kitayama S, Onuki R, Yamazaki K (2014) Warpage reduction with variable pressure profile in plastic injection molding via sequential approximate optimization. Int J Adv Manuf Techno 72(5–8):827–838
Zhao P, Zhou H, Li Y, Li D (2010) Process parameters optimization of injection molding using a fast strip analysis as a surrogate model. Int J Adv Manuf Technol 49:949–959
Li XL, Hu B, Du RX (2008) Predicting the parts weight in plastic injection molding using least squares support vector regression. IEEE T Syst Man Cy C 38(6):827–833
Wei XW, Luo B, Liao XP (2011) An enhanced optimization approach based on Gaussian process surrogate model for process control in injection molding. Int J Adv Manuf Technol 56(9–12):929–942
Azlan MZ, Habibollah H, Safian S (2012) Integrated ANN-GA for estimating the minimum value for machining performance. Int J Prod Res 50(1):191–213
Chen WC, Tai PH, Wang MW, Deng WJ, Chen CT (2008) A neural network-based approach for dynamic quality prediction in a plastic injection molding process. Expert Syst Appl 35(3):843–849
Shen CY, Wang LX, Li Q (2007) Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method. J Mater Process Tech 183(23):412–418
Guo W, Hua L, Mao HJ (2014) Minimization of sink mark depth in injection-molded thermoplastic through design of experiments and genetic algorithm. Int J Adv Manuf Technol 72(1–4):365–375
Castro CE, Rios MC, Lilly B, Castro JM (2005) Simultaneous optimization of mold design and processing conditions in injection molding. J Polym Eng 25(6):459–485
Huang CC, Tang TT (2006) Parameter optimization in melt spinning by neural networks and genetic algorithms. Int J Adv Manuf Technol 27(11):1113–1118
Chen WC, Fu GL, Tai PH, Deng WJ (2009) Process parameter optimization for MIMO plastic injection molding via soft computing. Expert Syst Appl 36(2):1114–1122
Zhou J, Turng LS (2007) Adaptive multiobjective optimization of process conditions for injection molding using a Gaussian process approach. Adv Ploym Tech 26(2):71–85
Wei Z, Feng YX, Tan JR, Wang JL, Li ZK (2009) Multi-objective performance optimal design of large-scale injection molding machine. Int J Adv Manuf Technol 41(3/4):242–249
Wei Z, Yang DD, Wang XY, Wang JL (2009) Multi-objectives optimal model of heavy equipment using improved Strength Pareto Evolutionary Algorithm. Int J Adv Manuf Technol 45(3/4):389–396
Solimanpur M, Ranjdoostfard F (2009) Optimisation of cutting parameters using a multi-objective genetic algorithm. Int J Prod Res 47(21):6019–6036
Cheng J, Liu ZY, Tan JG (2013) Multiobjective optimization of injection molding parameters based on soft computing and variable complexity method. Int J Adv Manuf Technol 66(5–8):907–916
Luo YB, Xiao TY, Chen DF (2003) Key technologies for sharing NC machine tool based on multi-agent. Comput-integr Manuf Syst 9(9):750–754
Woll SLB, Cooper DJ (1997) Pattern-based closed-loop quality control for the injection molding process. Polym Eng Sci 37(5):801–812
Zhang YJ, Zhang X (2007) Grey correlation analysis between strength of slag cement and particle fractions of slag powder. Cement Concrete Comp 29(6):498–504
Shi YH, Eberhart RC (1998) A modified particle swarm optimizer. In: Proceedings of the IEEE international conference on evolutionary computation, pp. 69–73
Shi YH, Eberhart RC (1999) Empirical study of particle swarm optimization, in: Proceedings of the IEEE Congress on Evolutionary Computation, pp. 1945–1950.
Carlos A, Coello C, Gregorio TP, Maximino SL (2004) Handling multiple objectives with particle swarm optimization. IEEE T Evolut Comput 8(3):256–279
Zhang JR, Zhang J, Lok TM, Lyu MR (2007) A hybrid particle swarm optimization-back-propagation algorithm for feedforward neural network training. Appl Math Comput 185(2):1026–1037
Hsu CM (2004) Improving the electroforming process in optical recordable media manufacturing via integrated procedure. Eng Optimiz 36(6):659–675
Su CT, Chang HH (2000) Optimization of parameter design: an intelligent approach using neural network and simulated annealing. Int J Sys Sci 31(12):1543–1549
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, G., Yang, Z. Multiobjective optimization of process parameters for plastic injection molding via soft computing and grey correlation analysis. Int J Adv Manuf Technol 78, 525–536 (2015). https://doi.org/10.1007/s00170-014-6643-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-014-6643-4