Abstract
Robots are increasingly performing human work as manufacturing is automated. Accordingly, the use of precision speed reducers has become essential for achieving precise control of the robot arm position. Curved tooth profiles, such as cycloid or involute tooth profiles, are generally used in precision speed reducers. Speed reducers with cycloid tooth profiles, which enable high precision control, are widely used to manipulate robot systems. This study proposes a speed reducer that has a trapezoidal tooth profile with straight lines. In this work, we mechanically analyzed trapezoidal tooth profiles, and then measured performance was by various tests using a prototype manufactured specifically for this study.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
D.W. Botsiber and L. Kingston, Design and performance of cycloid speed reducer, Mach. Des., June (1956) 407–414.
J.G. Blanche and D. C. H. Yang, Cycloid drives with machining tolerances, J. Mech. Transm. and Automat. Des., 111 (1989) 337–344.
T. Seiki, RV Series, Catalog (2001).
Harmonic Drive System, Harmonic Drive, Catalog, 4–12, (2000).
Y.-W. Hwang and C.-F. Hsieh, Geometric Design Using Hypotrochoid and Nonundercutting Conditions for an Internal Cycloidal Gear, J. Mech. Des., April, 129(4) (2007) 413–420.
F. L. Litvin, The synthesis of approximate meshing for spatial gears, J. Mech., 3 (1968) 131–148.
Y. C. Tsai and P. C. Chin, Surface geometry of straight and spiral bevel gears, ASME Trans., J. Mech. Transm. Automat. Des., 109 (1987) 443–449.
C. C. Lin and L. W. Tsai, The trajectory analysis of bevel gear Trains, ASME Trans., J. Mech. Des., 115 (1993)164–170.
H. S. Yan and J. Y. Liu, Geometric design and machining of variable pitch lead screws with cylindrical meshing elements, ASME Trans., J. Mech. Des., 115(4) (1993) 490–495.
H. S. Yan and T. S. Lai, Geometry design of an elementary planetary gear train with cylindrical tooth-profiles, Mech. Mach. Theory, 37(6) (2002) 757–767.
Sumitomo Machinery Corp. of America, SM-Servo-Match Precision Torque Multiplying Component, Catalog (2001).
SEJINiGB, Xcellent series, Catalog, 18–20 (2006/2007).
F. L. Litvin, Theory of Gearing, NASA Reference Publication, 1212 4–14.
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper was recommended for publication in revised form by Associate Editor Jeong Sam Han
Se-Hoon Oh received his Ph.D. Degree from Imperial College of U.K.. Dr. Oh is currently a Professor at the Department of Mechanical Engineering at Chung-Ang University in Seoul, Korea. His research interests include robotics, Harmonic driver system, Cycloid speed reducer and Bicycle
Won-Ki Nam received his B.S. degree in 2006 and M.S Degree in 2008 from Chung-Ang University of Korea, and is currently a Ph.D. candidate in Department of Mechanical Engineering at Chung-Ang University in Seoul, Korea. His research interests include robotics, Harmonic driver system, Cycloid speed reducer and designing of tooth profile.
Rights and permissions
About this article
Cite this article
Nam, WK., Oh, SH. A design of speed reducer with trapezoidal tooth profile for robot manipulator. J Mech Sci Technol 25, 171–176 (2011). https://doi.org/10.1007/s12206-010-1112-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12206-010-1112-y