Abstract
The cross-sections of Reinforced Concrete (RC) members are assumed in the preliminary design. With optimization, optimum dimensions of cross-sections providing required security measures can be obtained. Although, the area of the reinforcement bars is a computable value according to the cross-section, the amount and size of bars are also design variables in order to ensure the placement of bars providing adherence and other physical conditions. In this paper, the optimum design of RC continuous beams is presented by considering design constraints given in ACI-318 (Building Code Requirements for Structural Concrete). The most critical stress resultants of continuous beams are computed for all live load distribution patterns using three moment equations and were used in the analysis of continuous beam. A Random Search Technique (RST) is developed in order to minimize the material cost of the continuous beam. The RST is employed in different stages of optimization process such as cross-section and reinforcement bar optimization. The approach is effective to find the detailed optimum design of RC continuous beams with minimum cost.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Coello, C. C., Hernandez, F. S., and Ferrera, F. A. (1997). “Optimal design of reinforced concrete beams using genetic algorithms.” Expert Syst. Appl., Vol. 12, No. 1, pp. 101–108, DOI: 10.1016/S0957-4174(96) 00084-X.
Rafiq, M. Y. and Southcombe, C. (1998). “Genetic algorithms in optimal design and detailing of reinforced concrete biaxial columns supported by a declarative approach for capacity checking.” Comput. Struct., Vol. 69, No. 4, pp. 443–457, DOI: 10.1016/S0045-7949(98)00108-4.
Koumousis, V. K. and Arsenis, S. J. (1998). “Genetic algorithms in optimal detailed design of reinforced concrete members.” Comput-Aided Civ. Inf., Vol. 13, No. 1, pp. 43–52, DOI: 10.1111/0885-9507.00084.
Rath, D. P., Ahlawat, A. S., and Ramaswamy, A. (1999). “Shape optimization of RC flexural members.” J. Struct. Eng.-ASCE., Vol. 125, No. 12, pp. 1439–1446, DOI: 10.1061/(ASCE)0733-9445(1999) 125:12(1439).
Camp, C. V., Pezeshk, S., and Hansson, H. (2003). “Flexural design of reinforced concrete frames using a genetic algorithm.” J. Struct. Eng.-ASCE., Vol. 129, No. 1, pp. 105–11, DOI: 10.1061/(ASCE) 0733-9445(2003)129:1(105).
ACI 318M-05 (2005). Building code requirements for structural concrete and commentary, American Concrete Institute.
Ferreira, C. C., Barros, M. H. F. M., and Barros, A. F. M. (2003). “Optimal design of reinforced concrete T-sections in bending.” Eng. Struct., Vol. 25, No. 7, pp. 951–964, DOI: 10.1016/S0141-0296(03)00039-7.
Leps, M. and Sejnoha, M. (2003). “New approach to optimization of reinforced concrete beams.” Comput. Struct., Vol. 81, Nos. 18-19, pp. 1957–1966, DOI: 10.1016/S0045-7949(03)00215-3.
Barros, M. H. F. M., Martins, R. A. F., and Barros, A. F. M. (2005). “Cost optimization of singly and doubly reinforced concrete beams with EC2-2001.” Struct. Multidiscip. O., Vol. 30, No. 3, pp. 236–242, DOI: 10.1007/s00158-005-0516-2.
Govindaraj, V. and Ramasamy, J. V. (2005). “Optimum detailed design of reinforced concrete continuous beams using Genetic Algorithms.” Comput. Struct., Vol. 84, Nos. 1-2, pp. 34–48, DOI: 10.1016/j.compstruc.2005.09.001.
Govindaraj, V. and Ramasamy, J. V. (2007). “Optimum detailed design of reinforced concrete frames using genetic algorithms.” Eng. Optimiz., Vol. 39, No. 4, pp. 471–494, DOI: 10.1080/03052150601180767.
Guerra, A. and Kiousis, P. D. (2006). “Design optimization of reinforced concrete structures.” Comput Concrete, Vol. 3, No. 5, pp. 313–334, DOI: 10.12989/cac.2006.3.5.313.
Gil-Martin, L. M., Hernandez-Montes, E., and Aschheim, M. (2010). “Optimal reinforcement of RC columns for biaxial bending.” Mater. Struct., Vol. 43, No. 9, pp. 1245–1256, DOI: 10.1617/s11527-009-9576-x.
Barros, A. F. M., Barros, M. H. F. M., and Ferreira, C. C. (2012). “Optimal design of rectangular RC sections for ultimate bending strength.” Struct. Multidiscip. O., Vol. 45, No. 6, pp. 845–860, DOI: 10.1007/s00158-011-0717-9.
Fedghouche, F. and Tiliouine, B. (2012). “Minimum cost design of reinforced concrete T-beams at ultimate loads using Eurocode2.” Eng. Struct., Vol. 42, pp. 43–50, DOI: 10.1016/j.engstruct.2012.04.008.
Camp, C. V. and Akin, A. (2012). “Design of retaining walls using big Bang–Big crunch optimization.” J. Struct. Eng.-ASCE, Vol. 138, No. 3, pp. 438–448, DOI: 10.1061/(ASCE)ST.1943-541X.0000461.
Bekda G. and Nigdeli, S. M. (2012). “Cost optimization of t-shaped reinforced concrete beams under flexural effect according to ACI 318.” In: 3rd European Conference of Civil Engineering, December 2-4 2012, Paris, France.
Timoshenko, S. P. (1953). History of strength of materials, McGraw-Hill, New York.
Dias da Silva, V. (2006). Mechanics and strength of materials, Springer, Berlin Heidelberg New York.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Nigdeli, S.M., Bekdaş, G. Optimum design of RC continuous beams considering unfavourable live-load distributions. KSCE J Civ Eng 21, 1410–1416 (2017). https://doi.org/10.1007/s12205-016-2045-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-016-2045-5