Abstract
Thickness deposition is a crucial issue on the application of electroformed micro mold inserts. Edge concentration effect is the main source of the non-uniformity. The techniques of adopting a non-conducting shield, a secondary electrode and a movable cathode were explored to improve the thickness deposition uniformity during the nickel electroforming process. Regarding these techniques, a micro electroforming system with a movable cathode was particularly developed. The thickness variation of a 16 mm×16 mm electroformed sample decreased respectively from 150% to 35%, 12% and 18% by these three techniques. Combining these validated methods, anickelmold insert for microlens array was electroformed with satisfactory mechanical properties and high replication precision. It could be applied to the following injection molding process.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
TANG Jun, WANG Hong, GUO Xin-qiu, DAI Xu-han, DING Gui-fu, YANG Chun-shen. An investigation of microstructure and mechanical properties of UV-LIGA nickel thin films electroplated in different electrolytes [J]. Journal of Micromechanics and Microengineering, 2010, 20(2): 025033.
KERDLAPEE P, WISITSORAAT A, PHOKARATKUL D, LEKSAKUL K, PHATTHANAKUN R, TUANTRANONT A. Fabrication of electrostatic MEMS microactuatorbased on X-ray lithography with Pb-based X-ray mask and dry-film-transfer-to-PCB process [J]. Microsystem Technologies, 2014, 20(1): 127–135.
MEYER P, CLAVERLEY J D, LEACH R K. Quality control for deep X-ray lithography (LIGA): A preliminary metrology study [J]. Microsystem Technologies, 2012, 18(4): 415–421.
SHANA W L, YANG Y, HILLIE K T, JORDAAN W A, SOBOYEJO W O. Role of oxide thickening in fatigue crack initiation in LIGA nickel MEMS thin films [J]. Materials Science & Engineering A, 2013, 561(3): 434–440.
JAIN A, GOPAL R. 2-DOF vibratory gyroscope fabricated by SU-8 based UV-LIGA process [J]. Microsystem Technologies, 2014, 20(7): 1291–1297.
SHOUTE L C T, WU Y, MCCREERY R L. Direct spectroscopic monitoring of conductance switching in polythiophenememory devices [J]. Electrochimica Acta, 2013, 110(6): 437–445.
YUTA O, KENJI Y, YOSHITAKA S, DAIJI N. Fabrication of UV range light guide plate [J]. Microsystem Technologies, 2010, 16(8): 1625–1631.
YANG Jian-ming, KIM D H, ZHU Di, WANG Kun. Improvement of deposition uniformity in alloy electroforming for revolving parts [J]. International Journal of Machine Tools & Manufacture, 2008, 48(3/4): 329–337.
MASLIY A I, PODDUBNY N P, VAIS A A. Effect of the variable profile of substrate conductivity on the dynamics of metal deposition on resistive tape [J]. Journal of Electroanalytical Chemistry, 2014, 727(11): 47–52.
LIM T, KIM M J, PARK K J, KIM K H, CHOE S, LEE Y S, KIM J J. The effect of inducing uniform Cu growth on formation of electroless Cu seed layer [J]. Thin Solid Films, 2014, 564: 299–305.
SHIH C J, LIN W C, LIN C S, OU S F, PAN Y N. Fabrication of diamond conditioners by using a micro patterning and electroforming approach [J]. Microelectronic Engineering, 2013, 103: 92–98.
MUHAMMAD R, CHO S H, LEE J H, PARK J G. Fluorocarbon film-assisted fabrication of a CoNi mold with high aspect ratio for nanoimprint lithography [J]. Microelectronic Engineering, 2013, 104: 58–63.
LEE J M, JOHN T H, JAMES J K, ALAN C W. Improvement of current distribution uniformity on substrates for microelectromechanical systems [J]. Journal of Micro/Nanolithography, MEMS, and MOEMS, 2004, 3(1): 146–151.
CHOI Y. Ultrasonic agitation-floating classification of nano-sized Ba–Mg ferrites particles formed by using self-propagating high temperature synthesis and fabrication of nickel-ferrites thin sheet by pulse-electroforming [J]. Journal of Nanoscience and Nanotechnology, 2013, 13(1): 607–610.
QIAO Feng, SUN Xiao-xuan, WEST A C. A shielded rotating disk setup with improved current distribution [J]. Journal of Applied Electrochemistry, 2014, 44(8): 945–952.
INGON K, PAT F M. Electroformed nickel stamper for light guide panel in LCD back light unit [J]. Electrochimica Acta, 2006, 52(4): 1805–1809.
XIE Hong-bin, ZHAO Xing, YANG Yong, BU Jing, FANG Zhi-liang, YUANG Xiao-cong. Cross-lenticular lens array for full parallax 3-D display with crosstalk reduction [J]. Science China, 2012, 55(3): 735–742. (in Chinese)
WENG Can, LEE W B, TO S. A study of the relevant effects on the maximum residual stress in the precision injection moulding of microlensarrays [J]. Journal of Micromechanics and Microengineering, 2010, 20(3): 035033.
CHEN Lei, KIRCHBERG S, JIANG Bing-yan, XIE Lei, JIA Yun-long, SUN Lei-lei. Fabrication of long-focal-length planoconvex microlens array by combining the micro-milling and injection molding processes [J]. Applied Optics, 2014, 53(31): 7369–7380.
Author information
Authors and Affiliations
Corresponding author
Additional information
Foundation item: Projects(51305465, 91123012) supported by the National Natural Science Foundation of China
Rights and permissions
About this article
Cite this article
Jiang, By., Weng, C., Zhou, My. et al. Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts. J. Cent. South Univ. 23, 2536–2541 (2016). https://doi.org/10.1007/s11771-016-3314-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-016-3314-7