Abstract
A spatial model and a refined model based on the straight-line hypothesis are used to analyze the stress state of nonthin elliptic cylindrical shells with certain end conditions for different thicknesses and aspect ratios. The results obtained are compared, and the validity range of the refined model is established
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
É. I. Grigolyuk and E. A. Kogan, Statics of Laminated Elastic Shells [in Russian], NII Mekhaniki MGU, Moscow (1999).
Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells of Variable Stiffness, Vol. 4 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1981).
Ya. M. Grigorenko, A. T. Vasilenko, and G. P. Golub, Statics of Anisotropic Shells with Finite Shear Stiffness [in Russian], Naukova Dumka, Kyiv (1987).
Ya. M. Grigorenko and L. S. Rozhok, “Discrete Fourier series in solving static boundary-value problems for elastic noncanonical bodies,” Mat. Metody Fiz.-Mekh. Polya, 48, No. 2, 78–100 (2005).
A. N. Guz and Yu. N. Nemish, Statics of Noncanonical Elastic Bodies, Vol. 2 of the six-volume series Spatial Problems of Elasticity and Plasticity [in Russian], Naukova Dumka, Kyiv (1984).
S. P. Timoshenko, A Course of Elasticity Theory [in Russian], Naukova Dumka, Kyiv (1972).
G. M. Fikhtengol’ts, A Course of Differential and Integral Calculus [in Russian], Vol. 3, Nauka, Moscow (1949).
Ya. M. Grigorenko and L. S. Rozhok, “Stress analysis of orthotropic hollow noncircular cylinders,” Int. Appl. Mech., 40, No. 6, 679–685 (2004).
Ya. M. Grigorenko and L. S. Rozhok, “Stress solution for transversely isotropic corrugated hollow cylinders,” Int. Appl. Mech, 41, No. 3, 277–282 (2005).
Ya. M. Grigorenko and S. N. Yaremchenko, “Stress analysis of orthotropic noncircular cylindrical shells of variable thickness in a refined formulation,” Int. Appl. Mech., 40, No. 3, 266–274 (2004).
Ya. M. Grigorenko and S. N. Yaremchenko, “Influence of variable thickness on displacements and stresses in nonthin cylindrical orthotropic shells with elliptic cross-section,” Int. Appl. Mech., 40, No. 8, 900–907 (2004).
V. G. Piskunov and A. O. Rasskazov, “Evolution of the theory of laminated plates and shells,” Int. Appl. Mech., 38, No. 2, 135–166 (2002).
K. P. Soldatos, “Mechanics of cylindrical shells with noncircular cross-section. A survey,” Appl. Mech. Rev., 52, No. 8, 237–274 (1999).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 42, No. 8, pp. 44–57, August 2006.
Rights and permissions
About this article
Cite this article
Grigorenko, Y.M., Urusova, G.P. & Rozhok, L.S. Stress analysis of nonthin elliptic cylindrical shells in refined and spatial formulations. Int Appl Mech 42, 886–894 (2006). https://doi.org/10.1007/s10778-006-0156-2
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10778-006-0156-2