The model of a fracture process zone near the tip of a mode I crack in a nonlinear elastic body is proposed. Using the numerical solution of an appropriate boundary-value problem, the effect of the fracture process zone on a crack opening displacement is examined
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
P. M. Vitvitskii, V. V. Panasyuk, and S. A. Yarema, ”Plastic deformation in the vicinity of a crack and the criteria of fracture a review,” Strength of Materials, 5, No. 2, 135–151 (1973).
A. A. Ilyushin, ”Some problems in the theory of plastic deformations,” in: L. N. Kachanov et al., Plastic Deformation: Principles and Theories, Mapleton House, Brooklyn, New York (1948), pp. 45–96.
A. A. Kaminsky and D. A. Gavrilov, Long-Term Fracture of Polymeric and Composite Materials with Cracks [in Russian], Naukova Dumka, Kyiv (1992).
A. A. Kaminsky, G. I. Usikova, and E. A. Dmitrieva, ”Experimental study of the distribution of plastic strains near a crack tip during static loading,” Int. Appl. Mech., 30, No. 11, 892–897 (1994).
E. E. Kurchakov, ”Stress-strain relation for nonlinear anisotropic medium,” Int. Appl. Mech., 15, No. 9, 803–807 (1979).
V. V. Panasyuk, Limit Equilibrium of Brittle Bodies with Cracks [in Russian], Naukova Dumka, Kyiv (1968).
V. Z. Parton and E. M. Morozov, Mechanics of Elastic-Plastic Fracture, Hemisphere, Washington (1989).
H. Liebowitz (ed.), Fracture: An Advanced Treatise, Vols. 1–7, Acad. Press, New York–London (1968).
I. S. Sokol’nikov, Tensor Analysis [in Russian], Nauka, Moscow (1971).
A. N. Guz, ”On physically incorrect results in fracture mechanics,” Int. Appl. Mech., 45, No. 10, 1041–1051 (2009).
A. A. Kaminsky, “Subcritical crack growth in polymer composite materials,” in: G. P. Cherepanov (ed.), Fracture: A Topical Enciclopedia of Current Knowledge, Krieger, Malabar , FL (1998), pp. 758–765.
A. A. Kaminsky, ”Analyzing the laws of stable subcritical growth of cracks in polymeric materials on the basis of fracture mesomechanics models. Theory and experiment,” Int. Appl. Mech., 40, No. 8, 829–846 (2004).
A. A. Kaminsky and O. S. Bogdanova, ”A mesomechanical fracture model for an orthotropic material with different tensile and compressive strengths,” Int. Appl. Mech., 45, No. 3, 290–296 (2009).
A. A. Kaminsky, E. E. Kurchakov, and G. V. Gavrilov, ”Influence of tension along a crack on the plastic zone in an anisotropic body,” Int. Appl. Mech., 46, No. 6, 634–648 (2010).
H. Kauderer, Nonlinear Mechanics [in German], Springer-Verlag, Berlin (1958).
E. E. Kurchakov and G. V. Gavrilov, ”Formation of the plastic zone in an anisotropic body with a crack,” Int. Appl. Mech., 44, No. 9, 982–997 (2008).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 47, No. 6, pp. 149–158, November 2011.
Rights and permissions
About this article
Cite this article
Kaminsky, A.A., Kurchakov, E.E. Modeling the fracture process zone near a crack tip in a nonlinear elastic body. Int Appl Mech 47, 735–744 (2011). https://doi.org/10.1007/s10778-011-0499-1
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-011-0499-1