The influence of the length of a mode I crack on the plastic zone in an anisotropic body under hard loading is studied. The case of a generalized plane stress state is examined. A boundary-value problem is solved numerically to study the behavior of the main plastic zone at the crack tip, the additional plastic zone on the lateral face of the body, and the merged plastic zone
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. A. Il'yushin, “Some issues of plasticity theory,” Prikl. Mat. Mekh., 7, No. 4, 245–272 (1943).
E. E. Kurchakov, “Stress-strain relation for nonlinear anisotropic medium,” Int. Appl. Mech., 15, No. 9, 803–807 (1979).
E. E. Kurchakov, Tensor-Linear Constitutive Equations for a Nonlinear Anisotropic Body [in Russian], Manuscript No. 5544-V86 deposited at VINITI July 30, 1986, Kyiv (1986), p. 16.
V. Z. Parton and E. M. Morozov, Elastoplastic Fracture Mechanics [in Russian], Nauka, Moscow (1985), p. 504.
J. R. Rice, “Mathematical analysis in the mechanics of fracture,” in: H. Liebowitz (ed.), Fracture, An Advanced Treatise, Vol. II, Academic Press, New York (1968).
L. I. Slepyan, Crack Mechanics [in Russian], Sudostroenie, Leningrad (1981), p. 296.
I. S. Sokol'nikov, Tensor Analysis [in Russian], Nauka, Moscow (1971), p. 376.
M. E. Babeshko and Yu. N. Shevchenko, “Plastic incompressibility of anisotropic material,” Int. Appl. Mech., 41, No. 3, 256–263 (2005).
V. N. Bastun and A. A. Kaminsky, “Applied problems in the mechanics of strain hardening of structural metallic materials,” Int. Appl. Mech., 41, No. 10, 1092–1129 (2005).
G. V. Galatenko, O. S. Degtyaryeva, and A. A. Kaminsky, “Elastic-plastic fracture of an orthotropic plate with a crack under biaxial loading,” Int. Appl. Mech., 26, No. 8, 794–798 (1990).
A. N. Guz and I. A. Guz, “On models in the theory of stability of multiwalled carbon nanotubes in matrix,” Int. Appl. Mech., 42, No. 6, 617–628 (2006).
H. Hencky, “Zur Theorie der plastische Deformationen,” in: Proc. 1st Int. Congress on Applied Mechanics, Delft (1924), pp. 312–317.
A. A. Kaminskii and G. V. Galatenko, “Two-parameter model of a mode I crack in an elastoplastic body under plane-strain conditions,” Int. Appl. Mech., 41, No. 6, 621–630 (2005).
A. A. Kaminsky, “Analyzing the laws of stable subcritical growth of cracks in polymeric materials on the basis of fracture mesomechanics models. Theory and experiment,” Int. Appl. Mech., 40, No. 8, 829–846 (2004).
A. A. Kaminsky, M. V. Dudik, and L. A. Kipnis, “On the direction of development of a thin fracture process zone at the tip of an interfacial crack between dissimilar media,” Int. Appl. Mech., 42, No. 2, 136–144 (2006).
A. A. Kaminsky, L. A. Kipnis, and M. V. Dudik, “Initial development of the prefracture zone near the tip of a crack reaching the interface between dissimilar media,” Int. Appl. Mech., 40, No. 2, 176–182 (2004).
A. A. Kaminsky, E. E. Kurchakov, and G. V. Gavrilov, “Study of the plastic zone near a crack in an anisotropic body,” Int. Appl. Mech., 42, No. 7, 749–764 (2006).
A. A. Kaminsky, E. E. Kurchakov, and G. V. Gavrilov, “Formation of a plastic zone in an anisotropic body under loads acting along a crack,” Int. Appl. Mech., 43, No. 5, 475–490 (2007).
A. A. Kaminsky and S. B. Nizhnik, “Study of the laws governing the change in the plastic zone at the crack tip and characteristics of the fracture toughness of metallic materials in relation to their structure (survey),” Int. Appl. Mech., 31, No. 10, 777–798 (1995).
R. Mises, “Mechanik der festen Korper im plastisch deformablen Zustand,” in: Nachrichten von der Koniglichen Gesellschaft der Wissenschaften zu Gottingen, matematisch-physikalische Klasse, No. 4, 582–592 (1913).
A. Nadai, Plasticity, McGraw-Hill Book Company, New York-London (1931), p. 186.
Author information
Authors and Affiliations
Additional information
Translated from Prikladnaya Mekhanika, Vol. 44, No. 9, pp. 36–52, September 2008.
Rights and permissions
About this article
Cite this article
Kurchakov, E.E., Gavrilov, G.V. Formation of the plastic zone in an anisotropic body with a crack. Int Appl Mech 44, 982–997 (2008). https://doi.org/10.1007/s10778-009-0120-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-009-0120-z