Exact bending solutions of orthotropic rectangular cantilever thin plates subjected to arbitrary loads are derived by using a novel double finite integral transform method. Since only the basic elasticity equations for orthotropic thin plates are used, the method presented in this paper eliminates the need to predetermine the deformation function and is hence completely rational thus more accurate than conventional semi-inverse methods, which presents a breakthrough in solving plate bending problems as they have long been bottlenecks in the history of elasticity. Numerical results are presented to demonstrate the validity and accuracy of the approach as compared with those previously reported in the literature
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. P. Timoshenko and S. W. Woinowsky-Krieger, Theory of Plates and Shells, McGraw-Hill, New York (1959).
M. K. Huang and H. D. Conway, “Bending of a uniformly loaded rectangular plate with two adjacent edges clamped and the others either simply supported or free,” J. Appl. Mech., 451–460 (1952).
F. V. Chang, “Bending of uniformly cantilever rectangular plates,” Appl. Math. Mech., 1, 371–383 (1980).
F. V. Chang, “Bending of a cantilever rectangular plate loaded discontinuously,” Appl. Math. Mech., 2, 403–410 (1981).
F. V. Chang Elastic Thin Plates [in Chinese], 2nd Edition, Science Press, Beijing (1984).
Ya. M. Grigorenko, “Using discrete Fourier series to solve boundary-value stress problems for elastic bodies with complex geometry and structure,” Int. Appl. Mech., 45, No. 5, 469–513 (2009).
M. R. Khalili, K. Malekzadeh, and R. K. Mittal, “A new approach to static and dynamic analysis of composite plates with different boundary conditions,” Compos. Struct., 69, 149–155 (2005).
A. Ya. Grigorenko and N. P. Yaremchenko, “Stress state of nonthin orthotropic shells with varying thickness and rectangular planform,” Int. Appl. Mech., 44, No. 8, 905–915 (2008).
E. I. Bespalova, “Solving stationary problems for shallow shells by a generalized Kantorovich–Vlasov method,” Int. Appl. Mech., 44, No. 11, 1283–1293 (2008).
D. L. Holl, “Cantilever plate with concentrated edge load,” J. Appl. Mech., 4, 8–10 (1937).
M. V. Barton, Finite Difference Equations for the Analysis of Thin Rectangular Plates with Combinations of Fixed and Free Edges, Defense Research Lab. Rep. No. 175, Univ. of Texas (1948).
R. H. MacNeal, “The solution of elastic plate problems by electrical analogies,” J. Appl. Mech., 18, 59–67 (1951).
W. A. Nash, “Several approximate analysis of the bending of a rectangular cantilever plate by uniform normal pressure,” J. Appl. Mech., 33–36 (1952).
O. C. Zienkiewicz and Y. K. Cheung, “The finite element method for analysis of elastic isotropic and orthotropic slabs,” Proc. Inst. Civ. Eng., 28, 471–488 (1964).
Z. C. Shih, “On the spline finite element method,” J. Comput. Math., 1, 50–72 (1979).
Y. K. Cheung, Finite Strip Method in Structural Analysis, Pergamon Press, Oxford (1976).
M. A. Jaswon and M. Maiti, “An integral equation formulation of plate bending problems,” J. Eng. Math., 2, 83–93 (1968).
Ö. Civalek, “Three-dimensional vibration, buckling and bending analyses of thick rectangular plates based on discrete singular convolution method,” Int. J. Mech. Sci., 49, 752–765 (2007).
Ö. Civalek, “Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns,” Eng. Struct., 26, 171–186 (2004).
J. B. Han and K. M. Liew, “Static analysis of Mindlin plates: the differential quadrature element method (DQEM),” Comput. Meth. Appl. Mech. Eng., 177, 51–75 (1999).
B. M. Donning and W. K. Liu, “Meshless methods for shear-deformable beams and plates,” Comput. Meth. Appl. Mech. Eng., 152, 47–71 (1998).
P. Shen and P. He, “Bending analysis of rectangular moderately thick plates using spline finite element method,” Computers & Structures, 54, 1023–1029 (1995).
R. K. Livesley and P. C. Birchall, Analysis of a Loaded Cantilever Plate by Finite Difference Methods, Royal Aircraft Establishment Tech Note MS26, Farnsborough (1956).
T. K. Shu and T. T. Shih, “Variational principle of elastic thin plates and its application,” J. Beijing University of Aeronautics and Astronautics, 1, 27–40 (1957).
H. J. Plass, J. H. Gaines, and C. D. Newsom, “Application of Reissner’s variational principle to cantilever plate deflection and vibration problems,” J. Appl. Mech., 29, 127–135 (1962).
A. W. Leissa and F. W. Niedenfuhr, “A study of the cantilevered square plate subjected to a uniform loading,” J. Aero/Space Sci., 29, 162–169 (1962).
I. N. Sneddon, The Use of Integral Transforms, McGraw-Hill, New York (1972).
I. N. Sneddon, Application of Integral Transforms in the Theory of Elasticity, McGraw-Hill, New York (1975).
R. Szilard, Theory and Analysis of Plates: Classical and Numerical Methods, Prentice-Hall, New Jersey (1974).
A. E. Green, “Double Fourier series and boundary value problems,” Proc. Cambridge Philos. Soc., 40, 222–228 (1944).
Author information
Authors and Affiliations
Corresponding author
Additional information
Published in Prikladnaya Mekhanika, Vol. 47, No. 1, pp. 131–143, January 2011.
Rights and permissions
About this article
Cite this article
Li, R., Zhong, Y., Tian, B. et al. Exact bending solutions of orthotropic rectangular cantilever thin plates subjected to arbitrary loads. Int Appl Mech 47, 107–119 (2011). https://doi.org/10.1007/s10778-011-0448-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-011-0448-z