Abstract
The elastoplastic state of isotropic homogeneous cylindrical shells with elliptic holes and finite deflections under internal pressure is studied. Problems are formulated and numerically solved taking into account physical and geometrical nonlinearities. The distribution of stresses (displacements, strains) along the boundary of the hole and in the zone of their concentration is analyzed. The data obtained are compared with the numerical solutions of the physically nonlinear, geometrically nonlinear, and linear problems. The stress-strain state of cylindrical shells in the neighborhood of the elliptic hole is analyzed with allowance for nonlinear factors
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. N. Guz, A. G. Makarenko, and I. S. Chernyshenko, Strength of the Structure of Solid Rocket Motors [in Russian], Mashinostroenie, Moscow (1980).
A. N. Guz, E. A. Storozhuk, and I. S. Chernyshenko, “Physically and geometrically nonlinear static problems for thin-walled multiply connected shells,” Int. Appl. Mech., 39, No. 6, 679–687 (2003).
A. N. Guz, I. S. Chernyshenko, and K. I. Shnerenko, “Stress concentration near openings in composite shells,” Int. Appl. Mech., 37, No. 2, 139–181 (2001).
A. L. Kravchuk, E. A. Storozhuk, and I. S. Chernyshenko, “Stress distribution in flexible cylindrical shells with a circular cut beyond the elastic limit,” Int. Appl. Mech., 24, No. 12, 1179–1183 (1988).
V. A. Maksimyuk and I. S. Chernyshenko, “Mixed functionals in the theory of nonlinearly elastic shells,” Int. Appl. Mech., 40, No. 11, 1226–1262 (2004).
A. N. Guz, I. S. Chernyshenko, V. N. Chekhov, et al., Theory of Thin Shells with Holes, Vol. 1 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1980).
A. N. Guz, A. S. Kosmodamianskii, V. P. Shevchenko, et al., Stress Concentration, Vol. 7 of the 12-volume series Mechanics of Composite Materials [in Russian], A.S.K., Kyiv (1998).
V. P. Mulyar, E. A. Storozhuk, and I. S. Chernyshenko, “Elastoplastic state of thin-walled cylindrical shells with an elliptic hole in the lateral wall,” Prikl. Mekh., 33, No. 6, 62–68 (1997).
G. N. Savin, Stress Distribution around Holes [in Russian], Naukova Dumka, Kyiv (1969).
V. A. Salo, Static Boundary-Value Problems for Shells with Holes [in Russian], Nats. Tekhn. Univ. “KhHPI,” Kharkov (2003).
E. A. Storozhuk, I. S. Chernyshenko, and V. L. Yaskovets, “Elastoplastic state of spherical shells in the region of an elliptical hole,” Int. Appl. Mech., 25, No. 7, 667–672 (1989).
E. N. Troyak, E. A. Storozhuk, and I. S. Chernyshenko, “Elastoplastic state of a conical shell with a circular hole on the lateral surface,” Int. Appl. Mech., 24, No. 1, 65–70 (1988).
I. A. Tsurpal and N. G. Tamurov, Design of Multiply Connected Laminated Nonlinear Elastic Plates and Shells [in Russian], Vysshaya Shkola, Kyiv (1977).
I. S. Chernyshenko and E. A. Storozhuk, “Inelastic deformation of flexible cylindrical shell with a curvilinear hole,” Int. Appl. Mech., 42, No. 12, 1414–1420 (2006).
V. P. Mulyar, “On the stress distribution in a spherical shell with an off-center curvilinear hole,” Int. Appl. Mech., 42, No. 1, 98–102 (2006).
K. I. Shnerenko and V. F. Godzula, “Stress state of a cylindrical composite panel weakened by a circular hole,” Int. Appl. Mech., 42, No. 5, 555–559 (2006).
E. A. Storozhuk and I. S. Chernyshenko, “Physically and geometrically nonlinear deformation of spherical shells with an elliptic hole,” Int. Appl. Mech., 41, No. 6, 666–674 (2005).
R. S. Tennyson, D. K. Roberts, and D. Zimcik, “Analysis of the stress distribution around unreinforced cutouts cylindrical shells under axial compression,” NRS, NASA. Ann. Prog. Rept., UTJAS, 118–129 (1968).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 43, No. 5, pp. 46–54, May 2007.
Rights and permissions
About this article
Cite this article
Chernyshenko, I.S., Storozhuk, E.A. & Kadyrov, F.D. Inelastic deformation of flexible cylindrical shells with an elliptic hole. Int Appl Mech 43, 512–518 (2007). https://doi.org/10.1007/s10778-007-0048-0
Received:
Issue Date:
DOI: https://doi.org/10.1007/s10778-007-0048-0