Static problems for an elastoplastic elliptical cylindrical shell with a circular hole are formulated and a numerical method for solving it is developed. The basic equations are derived using the Kirchhoff–Love theory of deep shells and the theory of small elastoplastic strains. The method employs the method of additional stresses and the finite-element method. The influence of plastic strains and geometrical parameters of the shell subject to internal pressure on the distributions of stresses, strains, and displacements in the zone of their concentration is studied.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Yu. M. Kuznetsov, “The SSS of a noncircular cylindrical shell with a notch under pressure nonuniformly distributed along the directrix,” in: Proc. Seminar of KFTI KF AN SSSR on Studies on the Theory of Plates and Shells [in Russian], issue 24, Izd. KGU, Kazan’ (1992). pp. 35–39.
A. N. Guz, A. S. Kosmodamianskii, V. P. Shevchenko, et al., Stress Concentration, Vol. 7 of the 12-volume series Composite Mechanics [in Russian], A.S.K., Kyiv (1998).
E. A. Storozhuk and A. V. Yatsura, “Analytical-numerical solution of static problems for noncircular cylindrical shells of variable thickness,” Int. Appl. Mech., 53, No. 3, 313–325 (2017).
A. N. Guz, I. S. Chernyshenko, V. N. Chekhov, et al., Theory of Thin Shells Weakened by Holes, Vol. 1 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kyiv (1980).
Yu. Yu. Abrosov, V. A. Maximyuk, and I. S. Chernyshenko, “Influence of cross-sectional ellipticity on the deformation of a long cylindrical shell,” Int. Appl. Mech., 52, No. 5, 529–534 (2016).
P. M. A. Areias, J. H. Song, and T. Belytschko, “A finite-strain quadrilateral shell element based on discrete Kirchhoff–Love constraints,” Int. J. Numer. Meth. Eng., 64, 1166–1206 (2005).
K. J. Bathe and E. N. Dvorkin, “A four-node plate bending element based on Mindlin–Reissner plate theory and mixed interpolation,” Int. J. Numer. Meth. Eng., 21, No. 2, 367–383 (1985).
Y. N. Chen and J. Kempner, “Buckling of an oval cylindrical shell under compression and asymmetric bending,” AIAA J., 14, No. 9, 1235–1240 (1976).
I. S. Chernyshenko and E. A. Storozhuk, “Inelastic deformation of flexible cylindrical shells with a curvilinear hole,” Int. Appl. Mech., 42, No. 12, 1414–1420 (2006).
Ya. M. Grigorenko and L. V. Kharitonova, “Deformation of flexible noncircular cylindrical shells under concurrent loads of two types,” Int. Appl. Mech., 43, No. 7, 754–760 (2007).
A. N. Guz, E. A. Storozhuk, and I. S. Chernyshenko, “Nonlinear two-dimensional static problems for thin shells with reinforced curvilinear holes,” Int. Appl. Mech., 45, No. 12, 1269–1300 (2009).
T. A. Kiseleva, Yu. V. Klochkov, and A. P. Nikolaev, “Comparison of scalar and vector FEM forms in the case of an elliptic cylinder,” J. Comp. Math. Math. Phys., 55, No. 3, 422–431 (2015).
E. Oterkus, E. Madenci, and M. Nemeth, “Stress analysis of composite cylindrical shells with an elliptical cutout,” J. Mech. Mater. Struct., 2, No. 4, 695–727 (2007).
K. P. Soldatos, “Mechanics of cylindrical shells with non-circular cross-section: a survey,” Appl. Mech. Rev., 52, No. 8, 237–274 (1999).
E. A. Storozhuk and I. S. Chernyshenko, “Stress distribution in physically and geometrically nonlinear thin cylindrical shells with two holes,” Int. Appl. Mech., 41, No. 11, 1280–1287 (2005).
E. A. Storozhuk and A. V. Yatsura, “Exact solutions of boundary-value problems for noncircular cylindrical shells,” Int. Appl. Mech., 52, No. 4, 386–397 (2016).
R. C. Tennyson, M. Booton, and R. D. Caswell, “Buckling of imperfect elliptical cylindrical shells under axial compression,” AIAA J., 9, No. 2, 250–255 (1971).
S. P. Timoshenko, Strength of Materials, Part II. Advanced Theory and Problems, 2nd ed., D. Van Nostrand Company, New York (1941).
F. Tornabene, N. Fantuzzi, M. Bacciocchi, and R. Dimitri, “Free vibrations of composite oval and elliptic cylinders by the generalized differential quadrature method,” Thin-Walled Struct., 97, 114–129 (2015).
G. Yamada, T. Irie, and Y. Tagawa, “Free vibrations of non-circular cylindrical shells with variable circumferential profile,” J. Sound Vibr., 95, No. 1, 117–126 (1984).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Prikladnaya Mekhanika, Vol. 53, No. 6, pp. 49–56, November–December, 2017.
Rights and permissions
About this article
Cite this article
Storozhuk, E.A., Chernyshenko, I.S. & Pigol’, O.V. Elastoplastic State of an Elliptical Cylindrical Shell with a Circular Hole. Int Appl Mech 53, 647–654 (2017). https://doi.org/10.1007/s10778-018-0847-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-018-0847-5