Abstract
When the thickness of metallic cantilever beams reduces to the order of micron, a strong size effect of mechanical behavior has been found. In order to explain the size effect in a micro-cantilever beam, the couple-stress theory (Fleck and Hutchinson, J Mech Phys Solids 41:1825–1857, 1993) and the C-W strain gradient theory (Chen and Wang, Acta Mater 48:3997–4005, 2000) are used with the help of the Bernoulli–Euler beam model. The cantilever beam is considered as the linear elastic and rigid-plastic one, respectively. Analytical results of the cantilever beam deflection under strain gradient effects by applying these two kinds of theories are obtained, from which we find an explicit relationship between the intrinsic lengths introduced in the two kinds of theories. The theoretical results are further used to analyze the experimental observations, and predictions by both theories are further compared. The results in the present paper should be useful for the design of micro-cantilever beams in MEMS and NEMS.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Fleck N.A., Hutchinson J.W.: A phenomenological theory for strain gradient effects in plasticity. J. Mech. Phys. Solids 41, 1825–1857 (1993)
Chen S.H., Wang T.C.: A new hardening law for strain gradient plasticity. Acta Mater. 48, 3997–4005 (2000)
Fleck N.A., Muller G.M., Ashby M.F., Hutchinson J.W.: Strain gradient plasticity theory and experiment. Acta Metallurgica et Materialia 42, 475–487 (1994)
Atkinson M.: Further analysis of the size effect in indentation hardness tests of some metals. J. Mater. Res. 10, 2908–2915 (1995)
Feng G., Nix W.D.: Indentation size effect in MgO. Scr. Mater. 51, 599–603 (2004)
Chen S.H., Liu L., Wang T.C.: Investigation of the mechanical properties of thin films by nano-indentation, considering the effects of thickness and different coating–substrate combinations. Surface and Coatings Technology 191, 25–32 (2005)
Ma Q., Clarke D.R.: Size-dependent hardness of silver single-crystals. J. Mater. Res. 10, 853–863 (1995)
McElhaney K.W., Vlassak J.J., Nix W.D.: Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments. J. Mater. Res. 13, 1300–1306 (1998)
Nix W.D.: Mechanical-properties of thin-films. Metallurgical and Materials Transactions A 20, 2217–2245 (1989)
Poole W.J., Ashby M.F., Fleck N.A.: Micro-hardness of annealed and work-hardened copper polycrystals. Scr. Mater. 34, 559–564 (1996)
Saha R., Nix W.D.: Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Mater. 50, 23–38 (2002)
Saha R., Xue Z.Y., Huang Y., Nix W.D.: Indentation of a soft metal film on a hard substrate: strain gradient hardening effects. J. Mech. Phys. Solids 49, 1997–2014 (2001)
Stelmashenko N.A., Walls M.G., Brown L.M., Milman Y.V.: Microindentations on W and Mo oriented single crystals: An STM study. Acta Metall. Mater. 41, 2855–2865 (1993)
Swadener J.G., George E.P., Pharr G.M.: The correlation of the indentation size effect measured with indenters of various shapes. J. Mech. Phys. Solids 50, 681–694 (2002)
Yang J., Cady C., Hu M.S., Zok F., Mehrabian R., Evans A.G.: Effects of damage of the flow strength and ductility of a ductile Al-alloy reinforced with SiC particulates. Acta Metall. Mater. 38, 2613–2619 (1990)
Li X.D., Bhushan B., Takashima K., Baek C.W., Kim Y.K.: Mechanical characterization of micro/nanoscale structures for MEMS/NEMS applications using nanoindentation techniques. Ultramicroscopy 97, 481–494 (2003)
Pei J.H., Tian F., Thundat T.: Glucose biosensor based on the microcantilever. Anal. Chem. 76, 292–297 (2004)
Pereira R.D.: Atomic force microscopy as a novel pharmacological tool. Biochem. Pharmacol. 62, 975–983 (2001)
Ehrler B., Hou X.D., Zhu T.T., Png K.M.Y., Walker C.J., Bushby A.J., Dunstan D.J.: Grain size and sample size interact to determine strength in a soft metal. Phil. Mag. 88, 3043–3050 (2008)
Haque M.A., Saif M.T.A.: Strain gradient effect in nanoscale thin films. Acta Mater. 51, 3053–3061 (2003)
Lam D.C.C., Yang F., Chong A.C.M., Wang J., Tong P.: Experiments and theory in strain gradient elasticity. J. Mech. Phys. Solids 51, 1477–1508 (2003)
Shrotriya P., Allameh S.M., Lou J., Buchheit T., Soboyejo W.O.: On the measurement of the plasticity length scale parameter in LIGA nickel foils. Mech. Mater. 35, 233–243 (2003)
Stolken J.S., Evans A.G.: A microbend test method for measuring the plasticity length scale. Acta Mater. 46, 5109–5115 (1998)
Hall E.O.: Variation of hardness of metals with grain size. Nature 173, 948–949 (1954)
Weertman J.R.: Hall-petch strengthening in nanocrystalline metals. Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process. 166, 161–167 (1993)
Elssner G., Korn D., Ruhle M.: The influence of interface impurities on fracture energy of UHV diffusion-bonded metal-ceramic bicrystals. Scripta Metall. Mater. 31, 1037–1042 (1994)
Mindlin R.D.: Micro-structure in linear elasticity. Arch. Rat. Mech. Anal. 16, 51–78 (1964)
Mindlin R.D.: Second gradient of strain and surface tension in linear elasticity. Int. J. Solids Struct. 1, 417–438 (1965)
Fleck N.A., Hutchinson J.W.: Strain gradient plasticity. In: Hutchinson, J.W., Wu, T.Y. (eds) Advances in Applied Mechanics, vol. 33, pp. 295–361. Academic Press, New York (1997)
Fleck N.A., Hutchinson J.W.: A reformulation of strain gradient plasticity. J. Mech. Phys. Solids 49, 2245–2271 (2001)
Fleck N.A., Willis J.R.: A mathematical basis for strain-gradient plasticity theory. Part II: tensorial plastic multiplier. J. Mech. Phys. Solids 57, 1045–1057 (2009)
Gao H., Huang Y., Nix W.D.: Modeling plasticity at the micrometer scale. Naturwissenschaften 86, 507–515 (1999)
Gao H., Huang Y., Nix W.D., Hutchinson J.W.: Mechanism-based strain gradient plasticity-I. Theory. J. Mech. Phys. Solids 47, 1239–1263 (1999)
Gurtin M.E.: On the plasticity of single crystals: free energy, microforces, plastic-strain gradients. J. Mech. Phys. Solids 48, 989–1036 (2000)
Gurtin M.E.: A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations. J. Mech. Phys. Solids 50, 5–32 (2002)
Huang Y., Gao H., Nix W.D., Hutchinson J.W.: Mechanism-based strain gradient plasticity-II. Analysis. J. Mech. Phys. Solids 48, 99–128 (2000)
Huang Y., Xue Z., Gao H., Nix W.D., Xia Z.C.: A study of microindentation hardness tests by mechanism-based strain gradient plasticity. J. Mater. Res. 15, 1786–1796 (2000)
Hwang K.C., Jiang H., Huang Y., Gao H.: Finite deformation analysis of mechanism-based strain gradient plasticity: torsion and crack tip field. Int. J. Plast. 19, 235–251 (2003)
Hwang K.C., Jiang H., Huang Y., Gao H., Hu N.: A finite deformation theory of strain gradient plasticity. J. Mech. Phys. Solids 50, 81–99 (2002)
Yang F., Chong A.C.M., Lam D.C.C., Tong P.: Couple stress based strain gradient theory for elasticity. Int. J. Solids Struct. 39, 2731–2743 (2002)
Yi D.K., Wang T.C., Chen S.H.: New strain gradient theory and analysis. Acta Mech. Solida Sin. 22, 45–52 (2009)
Acharya A., Beaudoin A.J.: Grain-size effect in viscoplastic polycrystals at moderate strains. J. Mech. Phys. Solids 48, 2213–2230 (2000)
Bassani J.L.: Incompatibility and a simple gradient theory of plasticity. J. Mech. Phys. Solids 49, 1983–1996 (2001)
Evers L.P., Parks D.M., Brekelmans W.A.M., Geers M.G.D.: Crystal plasticity model with enhanced hardening by geometrically necessary dislocation accumulation. J. Mech. Phys. Solids 50, 2403–2424 (2002)
Huang Y., Qu S., Hwang K.C., Li M., Gao H.: A conventional theory of mechanism-based strain gradient plasticity. Int. J. Plast. 20, 753–782 (2004)
Peerlings R.H.J., deBorst R., Brekelmans W.A.M., deVree J.H.P.: Gradient enhanced damage for quasi-brittle materials. Int. J. Numer. Methods Eng. 39, 3391–3403 (1996)
Voyiadjis G.Z., Deliktas B., Aifantis E.C.: Multiscale analysis of multiple damage mechanisms coupled with inelastic behavior of composite materials. J. Eng. Mech. ASCE 127, 636–645 (2001)
Voyiadjis G.Z., Dorgan R.J.: Gradient formulation in coupled damage-plasticity. Arch. Mech. 53, 565–597 (2001)
Aifantis E.C., Oka F., Yashima A., Adachi T.: Instability of gradient dependent elasto-viscoplasticity for clay. Int. J. Numer. Anal. Methods Geomech. 23, 973–994 (1999)
Gurtin M.E.: On a framework for small-deformation viscoplasticity: free energy, microforces, strain gradients. Int. J. Plast. 19, 47–90 (2003)
Voyiadjis G.Z., Abu Al-Rub R.K., Palazotto A.N.: Non-local coupling of viscoplasticity and anisotropic viscodamage for impact problems using the gradient theory. Arch. Mech. 55, 39–89 (2003)
Wang W.M., Askes H., Sluys L.J.: Gradient viscoplastic modelling of material instabilities in metals. Metal. Mater. Int. 4, 537–542 (1998)
Chen S.H., Wang T.C.: A new deformation theory with strain gradient effects. Int. J. Plast. 18, 971–995 (2002)
Chen S.H, Wang T.C.: Strain gradient theory with couple stress for crystalline solids. Eur. J. Mech. A Solids 20, 739–756 (2001)
Gao H.J., Huang Y.G.: Taylor-based nonlocal theory of plasticity. Int. J. Solids Struct. 38, 2615–2637 (2001)
Chen S.H., Liu L., Wang T.C.: Size dependent nanoindentation of a soft film on a hard substrate. Acta Mater. 52, 1089–1095 (2004)
Nix W.D., Gao H.J.: Indentation size effects in crystalline materials: a law for strain gradient plasticity. J. Mech. Phys. Solids 46, 411–425 (1998)
Wei Y., Hutchinson J.W.: Hardness trends in micro scale indentation. J. Mech. Phys. Solids 51, 2037–2056 (2003)
Xue Z., Huang Y., Hwang K.C., Li M.: The influence of indenter tip radius on the micro-indentation hardness. J. Eng. Mater. Tech. 124, 371–379 (2002)
Chen S.H., Wang T.C.: Size effects in the particle-reinforced metal-matrix composites. Acta Mech. 157, 113–127 (2002)
Shu J.Y., Fleck N.A.: Strain gradient crystal plasticity: size-dependent deformation of bicrystals. J. Mech. Phys. Solids 47, 297–324 (1999)
Wei Y.: Particulate size effects in the particle-reinforced metal-matrix composites. Acta Mech. Sin. 17, 45–58 (2001)
Liu X., Hu G.: A continuum micromechanical theory of overall plasticity for particulate composites including particle size effect. Int. J. Plast. 21, 777–799 (2005)
Voyiadjis G.Z., Abu Al-Rub R.K.: Gradient plasticity theory with a variable length scale parameter. Int. J. Solids Struct. 42, 3998–4029 (2005)
Hu G.K., Liu X.N., Lu T.J.: A variational method for non-linear micropolar composites. Mech. Mater. 37, 407–425 (2005)
Wang W., Huang Y., Hsia K.J., Hu K.X., Chandra A.: A study of microbend test by strain gradient plasticity. Int. J. Plast. 19, 365–382 (2003)
McFarland A.W., Colton J.S.: Role of material microstructure in plate stiffness with relevance to microcantilever sensors. J. Micromech. Microeng. 15, 1060–1067 (2005)
Park S.K., Gao X.L.: Bernoulli-Euler beam model based on a modified couple stress theory. J. Micromech. Microeng. 16, 2355–2359 (2006)
Ma H.M., Gao X.L., Reddy J.N.: A microstructure-dependent Timoshenko beam model based on a modified couple stress theory. J. Mech. Phys. Solids 56, 3379–3391 (2008)
Challamel N., Wang C.M.: The small length scale effect for a non-local cantilever beam: a paradox solved. Nanotechnology 19, 345703 (2008)
Giannakopoulos A.E., Stamoulis K.: Structural analysis of gradient elastic components. Int. J. Solids Struct. 44, 3440–3451 (2007)
Ji B., Chen W.J., Zhao J.: Measurement of length-scale and solution of cantilever beam in couple stress elasto-plasticity. Acta Mech. Sin. 25, 381–387 (2009)
Shi Z.F., Huang B., Tan H., Huang Y., Zhang T.Y., Wu P.D., Hwang K.C., Gao H.: Determination of the microscale stress-strain curve and strain gradient effect from the micro-bend of ultra-thin beams. Int. J. Plast. 24, 1606–1624 (2008)
Mindlin R.D., Tiersten H.F.: Effects of couple-stress in linear elasticity. Arch. Rat. Mech. Anal. 11, 415–448 (1963)
Toupin R.A.: Elastic materials with couple-stresses. Arch. Rat. Mech. Anal. 11, 385–414 (1963)
Acharya A., Bassani J.L.: On nonlocal flow theories that preserve the classical structure of incremental boundary value problems. In: Pineau, A., Zaoui, A. (eds) IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials, pp. 3–9. Kluwer Academic Publishers, Dordrecht (1996)
Acharya A., Bassani J.L.: Lattice incompatibility and a gradient theory of crystal plasticity. J. Mech. Phys. Solids 48, 1565–1595 (2000)
Acharya A., Tang H., Saigal S., Bassani J.L.: On boundary conditions and plastic strain-gradient discontinuity in lower-order gradient plasticity. J. Mech. Phys. Solids 52, 1793–1826 (2004)
Volokh K.Yu., Hutchinson J.W.: Are lower-order gradient theories of plasticity really lower order?. J. Appl. Mech. 69, 862–864 (2002)
Niordson C.F., Hutchinson J.W.: On lower-order strain gradient plasticity theories. Eur. J. Mech. A Solids 22, 771–778 (2003)
Gurtin M.E., Anand L.: Thermodynamics applied to gradient theories involving the accumulated plastic strain: the theories of Aifantis and Fleck and Hutchinson and their generalization. J. Mech. Phys. Solids 57, 405–421 (2009)
Aifantis E.C: The physics of plastic deformation. Int. J. Plast. 3, 259–280 (1987)
Kuroda, M., Tvergaard V.: An alternative treatment of phenomenological higher-order strain-gradient plasticity theory. Int. J. Plast. 26, 507–515 (2010)
Mühlhaus H.B., Aifantis E.C.: A variational principle for gradient plasticity. Int. J. Solids Struct. 28, 845–857 (1991)
Abu Al-Rub R.K., Voyiadjis G.Z., Bammann D.J.: A thermodynamic based higher-order gradient theory for size dependent plasticity. Int. J. Solids Struct. 44, 2888–2923 (2007)
Reddy J.N.: Nonlocal theories for bending, buckling and vibration of beams. Int. J. Eng. Sci. 45, 288–307 (2007)
Shames I.H., Dym C.L.: Energy and finite element methods in structural mechanics. Hemisphere Pub. Corp., New York (1985)
Zhu H.X.: Large deformation pure bending of an elastic plastic power-law-hardening wide plate: Analysis and application. Int. J. Mech. Sci. 49, 500–514 (2007)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, S.H., Feng, B. Size effect in micro-scale cantilever beam bending. Acta Mech 219, 291–307 (2011). https://doi.org/10.1007/s00707-011-0461-7
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-011-0461-7