Abstract
In this paper a thick hollow cylinder with finite length made of two-dimensional functionally graded material (2D-FGM) and subjected to impact internal pressure is considered. The axisymmetric conditions are assumed for the 2D-FG cylinder. The finite element method with graded material properties within each element is used to model the structure, and the Newmark direct integration method is implemented to solve the time dependent equations. The time histories of displacements, stresses and 2D wave propagation are investigated for various values of volume fraction exponents. Also the effects of mechanical properties distribution in radial and axial direction on the time responses of the FG cylinder as well as the stress distribution are studied and compared with a cylinder made of 1D-FGM. The achieved results show that using 2D-FGM leads to a more flexible design. To verify the presented method and data, the results are compared to published data.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Koizumi M.: The concept of FGM. Ceram. Trans. Funct. Graded Mater. 34, 3–10 (1993)
Liu G.R., Han X., Lam K.Y. : Stress waves in functionally gradient materials and its use for material characterization. Compos. Part B Eng. 30, 383–394 (1999)
Chiu T.C., Erdogan F.: One-dimensional wave propagation in a functionally graded elastic medium. J. Sound Vib. 222, 453–487 (1999)
Bruck H.A.: A one-dimensional model for designing functionally graded materials to manage stress waves. Int. J. Solids Struct. 37, 6383–6395 (2000)
Li Y., Ramesh K.T., Chin E.S.C.: Dynamic characterization of layered and graded structures under impulsive loading. Int. J. Solids Struct. 38, 6045–6061 (2001)
Han X., Liu G.R., Lam K.Y.: Transient waves in plates of functionally graded materials. Int. J. Numer. Methods Eng. 52, 851–865 (2001)
Berezovski A., Engelbrecht J., Maugin G.A.: Numerical simulation of two-dimensional wave propagation in functionally graded materials. Eur. J. Mech. A Solids 22, 257–265 (2001)
Batra R.C., Ching H.K.: Analysis of elastodynamic deformations near a crack-notch tip by the meshless local Petrov–Galerkin (MLPG) method. Comput. Model. Eng. Sci. 3, 717–730 (2002)
Zhang G.M., Batra R.C.: Wave propagation in functionally graded materials by modified smoothed particle hydrodynamics (MSPH) method. J. Comput. Phys. 222, 374–390 (2007)
Shakeri M., Akhlaghi M., Hoseini S.M.: Vibration and radial wave propagation velocity in functionally graded thick hollow cylinder. Compos. Struct. 76, 174–181 (2006)
Hosseini M., Akhlaghi M., Shakeri M.: Dynamic response and radial wave propagations of functionally graded thick hollow cylinder. Eng. Comput. 24, 288–303 (2007)
Nemat-Alla M.: Reduction of thermal stresses by developing twodimensional functionally graded materials. Int. J. Solids Struct. 40, 7339–7356 (2003)
Dhaliwal R.S., Singh B.M.: On the theory of elasticity of a non-homogeneous medium. J. Elast. 8, 211–219 (1978)
Clements D.L., Budhi W.S.: A boundary element method for the solution of a class of steady-state problems for anisotropic media. Heat Transf. 121, 462–465 (1999)
Abudi J., Pindera M.J.: Thermoelastic theory for the response of materials functionally graded in two directions. Int. J. Solids Struct. 33, 931–966 (1996)
Cho J.R., Ha D.Y.: Optimal tailoring of 2D volume-fraction distributions for heat-resisting functionally graded materials using FDM. Comput. Methods Appl. Mech. Eng. 191, 3195–3211 (2002)
Hedia H.S., Midany T.T., Shabara M.A.N., Fouda N.: Development of cementless metal-backed acetabular cup prosthesis using functionally graded material. Int. J. Mech. Mater. Des. 2, 259–267 (2005)
Santare M.H., Thamburaj P., Gazonas A.: The use of graded finite elements in the study of elastic wave propagation in continuously non-homogeneous materials. Int. J. Solids Struct. 40, 5621–5634 (2003)
Banks Sills L., Eliasi R., Berlin Y.: Modeling of functionally graded materials in dynamic analyses. Compos. Part B. Eng. 33, 7–15 (2002)
Scheidler, M.J., Gazonas, G.A.: Analytical and computational study of one-dimensional impact of graded elastic solids. In: Furnish, M.D. et al. (eds.) Shock Compression of Condensed Materials, pp. 689–692 (AIP CP620), Melville, NY, 2001. American Institute of Physics, Woodbury (2002)
Santare M.H., Lambros J.: Use of a graded finite element to model the behavior of nonhomogeneous materials. J. Appl. Mech. 67, 819–822 (2000)
Kim J.H., Paulino G.H.: Isoparametric graded finite elements for nonhomogeneous isotropic and orthotropic materials. J. Appl. Mech. 69, 502–514 (2002)
Zienkiewicz O.C., Taylor R.L.: The Finite Element Method, VII: Solid Mechanics, 5th edn. Butterworth-Heinemann, Oxford (2000)
Shao Z.S.: Mechanical and thermal stresses of a functionally graded circular hollow cylinder with finite length. Int. J. Press. Vess. Pip. 82, 155–163 (2005)
Goupee A.J., Vel S.S.: Two-dimensional optimization of material composition of functionally graded materials using meshless analyses and a genetic algorithm. Comput. Methods Appl. Mech. Eng. 195, 5926–5948 (2006)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Asgari, M., Akhlaghi, M. & Hosseini, S.M. Dynamic analysis of two-dimensional functionally graded thick hollow cylinder with finite length under impact loading. Acta Mech 208, 163–180 (2009). https://doi.org/10.1007/s00707-008-0133-4
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00707-008-0133-4