Abstract
A boundary element method (BEM) formulation to predict the behavior of solids exhibiting displacement (strong) discontinuity is presented. In this formulation, the effects of the displacement jump of a discontinuity interface embedded in an internal cell are reproduced by an equivalent strain field over the cell. To compute the stresses, this equivalent strain field is assumed as the inelastic part of the total strain. As a consequence, the non-linear BEM integral equations that result from the proposed approach are similar to those of the implicit BEM based on initial strains. Since discontinuity interfaces can be introduced inside the cell independently on the cell boundaries, the proposed BEM formulation, combined with a tracking scheme to trace the discontinuity path during the analysis, allows for arbitrary discontinuity propagation using a fixed mesh. A simple technique to track the crack path is outlined. This technique is based on the construction of a polygonal line formed by segments inside the cells, in which the assumed failure criterion is reached. Two experimental concrete fracture tests were analyzed to assess the performance of the proposed formulation.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Aliabadi MH (1997) Boundary element formulations in fracture mechanics. Appl Mech Rev 50:83–96
Aliabadi MH, Saleh AL (2002) Fracture mechanics analysis of cracking in plain and reinforced concrete using the boundary element method. Eng Fract Mech 69:267–280
Arrea M, Ingraffea AR (1982) Mixed-mode crack propagation in mortar and concrete. Dept Struct Eng Rep 81–13
Benallal A, Fudoli CA, Venturini WS (2002) An implicit bem formulation for gradient plasticity and localization phenomena. Int J Numer Method 53:1853–1869
Bonnet M, Mukherjee S (1996) Implicit bem formulations for usual and sensitivity problems in elasto-plasticity using the consistent tangent operator concept. Int J Solids Struct 33(30):4461–4480
Brebbia CA, Telles JCF, Wrobel LC (1984) Boundary element techniques. Springer, Berlin Heidelberg New York
Cen Z, Maier G (1992) Bifurcations and instabilities in fracture of cohesive-softening structures: a boundary element analysis. Fatigue Fract Eng Mater 15:911–928
Chen T, Wang B, Cen Z, Wu Z (2002) A symmetric galerkin multi-zone boundary element method for cohesive crack growth. Eng Fract Mech 63:591–609
Hillerborg A, Modeer M, Petersson PE (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement Concrete Res 6:773–782
Jiang YS, Venturini WS (2000) A general boundary element method for analysis of slope stability. In: Roeck G, Topping BHV (eds) Computational civil and structural engineering. Civil-comp Press, pp 191–198
Jirásek M (2000) Comparative study on finite elements with embedded discontinuities. Comp Methods Appl Mech Eng 188:307–330
Liang RY, Li YN (1992) Simulations of non-linear fracture process zone in cementitious material a boundary element approach. J Comput Mech 7(4):413–427
Lopes MC~Jr., Venturini WS (1997) Cohesive crack analysis by the boundary element method. In: Owen DRJ, Onate E, Hinton E (eds) Proc. international conference on computational plasticity V. Barcelona, CIMNE, pp 1057–1062
Manzoli OL, Shing PB (2006) A general technique to embed non-uniform discontinuities into standard solid finite elements. Comput Struct 84:742–757
Nooru-Mohamed MB (1992) Mixed-mode fracture of Concrete: an experimental approach. PhD thesis, Delft University of Technology
Oliver J (1995) Continuum modelling of strong discontinuities in solid mechanics using damage models. Comput Mech 17(1–2):49–61
Oliver J (1996) Modeling strong discontinuities in solid mechanics via strain softening constitutive equations. part 1: Fundamentals. Int J Num Meth Eng 39(21):3575–3600
Oliver J (1996) Modeling strong discontinuities in solid mechanics via strain softening constitutive equations. part 2: Numerical simulation. Int J Num Meth Eng 39(21):3601–3623
Oliver J (2000) On the discrete constitutive models induced by strong discontinuity kinematics and continuum constitutive equations. Int J Solids Struct 37:7207–7229
Oliver J, Cervera M, Manzoli OL (1997) On the use of j2 plasticity models for the simulation of 2d strong discontinuities in solids. In: Owen DRJ, Onate E, Hinton E (eds) Proc. international conference on computational plasticity V. Barcelona, CIMNE, pp 38–55
Oliver J, Cervera M, Manzoli OL (1999) Strong discontinuities and continuum plasticity models: the strong discontinuity approach. Int J Plasticity 15(3):319–351
Oliver J, Huespe AE, Samaniego E, Chaves EWV (2004) Continuum approach to the numerical simulation of material failure in concrete. Int J Numer Anal Methods Geomech 28:609–632
Oliver J, Simó JC (1994) Modelling strong discontinuities by means of strain softening contitutive equations. In Mang H et al. (eds) Proc. EURO-C 1994 computer modelling of concrete structures Swansea. Pineridge Press, pp 363–372
Portela A, Aliabadi MH, Rooke DP (1992) Dual boundary element method: efficient implementation for cracked problems. Int J Numer Methods Eng 33:1269–1287
Saleh AL, Aliabadi MH (1995) Crack growth analysis using boundary element method. Eng Fract Mech 51:533–545
Simó JC, Hughes TJR (1998) Computational Inelasticity. Springer, Berlin Heidelberg New York
Simó JC, Oliver J, Armero F (1993) An analysis of strong discontinuities induced by strain-softening in rate-independent inelastic solids. Comput Mech 12:277–296
Spencer B (2002) Finite elements with embedded discontinuities for modeling reinforced concrete members, PhD thesis, University of Colorado
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Manzoli, O.L., Venturini, W.S. An implicit BEM formulation to model strong discontinuities in solids. Comput Mech 40, 901–909 (2007). https://doi.org/10.1007/s00466-006-0149-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00466-006-0149-3