Abstract.
A new method for airborne vector gravimetry using GPS/INS has been developed and the results are presented. The new algorithm uses kinematic accelerations as updates instead of positions or velocities, and all calculations are performed in the inertial frame. Therefore, it is conceptually simpler, easier, more straightforward and computationally less expensive compared to the traditional approach in which the complex navigation equations should be integrated. Moreover, it is a unified approach for determining all three vector components, and no stochastic gravity modeling is required. This approach is based on analyzing the residuals from the Kalman filter of sensor errors, and further processing with wavenumber coefficient filterings is applied in case closely parallel tracks of data are available. An application to actual test-flight data is performed to test the validity of the new algorithm. The results yield an accuracy in the down component of about 3–4 mGal. Also, comparable results are obtained for the horizontal components with accuracies of about 6 mGal. The gravity modeling issue is discussed and alternative methods are presented, none of which improves on the original approach.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Author information
Authors and Affiliations
Additional information
Received: 18 April 2000 / Accepted: 14 August 2000
Rights and permissions
About this article
Cite this article
Kwon, J., Jekeli, C. A new approach for airborne vector gravimetry using GPS/INS. Journal of Geodesy 74, 690–700 (2001). https://doi.org/10.1007/s001900000130
Issue Date:
DOI: https://doi.org/10.1007/s001900000130