Abstract
Chatter is investigated for a single degree of freedom model of turning process, where the tool is simplified into a cantilever beam, and the modal parameters of the tool can be obtained from the theory of continuous beam. The cutting force is modeled as a force system distributed along the rake face of the tool. And the distributed cutting force combines the Taylor approximation of the cutting force with an exponential shape function. The distributed cutting force model results in a discrete time delay and a continuous time delay in the governing equation of the system, while the conventional cutting force model only involves a discrete time delay. It is shown that the delay terms significantly influence the stability of machining operations, especially at low spindle speeds. The effect of the continuous time delay is further studied in this paper by ignoring the discrete time delay in the governing equations of the system. The semi-discretization technique is used to compute the stability lobe diagrams of turning operations. The sensitivity of stability charts to the shape of force distribution and the ratio of the discrete time delay and the continuous time delay q is analyzed. Turning stability tests are also conducted to verify the accuracy of the distributed cutting force model.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Song QH, Liu Z, Shi Z (2014) Chatter stability for micromilling processes with flat end mill. Int J Adv Manuf Technol 71(5–8):1159–1174
Tobias SA (1965) Machine-tool vibration. Blackie
Altintas Y (2012) Manufacturing automation: metal cutting mechanics, machine tool vibrations, and CNC design. Cambridge University Press
Zhang XW, Yu T, Wang W (2016) Chatter stability of micro end milling by considering process nonlinearities and process damping. Int J Adv Manuf Technol 87:2785–2796
A.K. Firas, P.M. Brian (2009) Increased stability of low-speed turning through a distributed force and continuous delay model. J Comput Nonlin Dynam 4(4): 041003–041001–12
Song QH, Ai X, Guo B (2012) Stability of turning process with a continuous delay model. Adv Mater Res 500:20–25
T.G. Molnár, T. Insperger, S.J. Hogan, G. Stépán (2016) Estimation of the bistable zone for machining operations for the case of a distributed cutting force model. J Comput Nonlin Dynam 11: 051008–051001–10
X.Z. Huang, M.W. Hu, Y.M. Zhang, C.M. Lv (2016) Probabilistic analysis of chatter stability in turning. Int J Adv Manuf Technol 87:1–8
Molnár TG, Insperger T, Stépán G (2016) State-dependent distributed-delay model of orthogonal cutting. Nonlinear Dynam 84(3):1–10
Ozturk E, Comak A, Budak E (2016) Tuning of tool dynamics for increased stability of parallel (simultaneous) turning processes. J Sound Vib 360:17–30
Gyebrószki G, Bachrathy D, Csernák G, Stepan G (2018) Stability of turning processes for periodic chip formation. Adv Manuf 2018:1–9
A. Comak, Y. Altintasb (2018) Dynamics and stability of turn-milling operations with varying time delay in discrete time domain. J Manuf Sci Eng 140: 101013-1-14
Dorlin T, Fromentin G, Costes JP (2016) Generalized cutting force model including contact radius effect for turning operations on Ti6Al4V titanium alloy. Int J Adv Manuf Technol 86(9–12):3297–3313
Kim DY, Kim DM, Park HW (2018) Predictive cutting force model for a cryogenic machining process incorporating the phase transformation of Ti-6Al-4V. Int J Adv Manuf Technol 96:1293–1304
Ma LJ, Yu AB, Chen J (2017) Theoretical model of cutting force in turning the lithium disilicate glass-ceramic. Int J Adv Manuf Technol 92(9–12):4355–4366
Cao GJ, Wang Y, Tang G (2018) Properties of NiCrAlY coatings fabricated on superalloy GH4169 by electrospark deposition. Int J Adv Manuf Technol 96:1787–1793
H. Takahashi, T. Yuki, K. Suzuki (2016) Modeling of ball screw driven stage for drilling machines with lumped parameter system model and FEM model. Mech Eng J 3(4): 00068–00061–12
Slavik A (2012) Dynamic equations on time scales and generalized ordinary differential equations. J Math Anal Appl 385(1):534–550
Molnar TG, Insperger T (2015) On the effect of distributed regenerative delay on the stability lobe diagrams of milling processes. Period Polytech Mech Eng 59(3):126–136
Song QH, Shi J, Wan ZL (2016) A time-space discretization method in milling stability prediction of thin-walled component. Int J Adv Manuf Technol 89(9–12)
Dong XF, Zhang W, Deng S (2016) The reconstruction of a semi-discretization method for milling stability prediction based on Shannon standard orthogonal basis. Int J Adv Manuf Technol 85:1501–1511
Borkovic A, Kovacevic S (2018) Rotation-free isogeometric analysis of an arbitrarily curved plane Bernoulli-Euler beam. Comput Method Appl M 334:238–267
Astakhov VP, Outeiro JC (2005) Modeling of the contact stress distribution at the tool–chip interface. Mach Sci Technol 9(1):85–99
Kilic DS, Raman S (2007) Observations of the tool-chip boundary conditions in turning of aluminum alloys. Wear 262(7–8):889–904
Boudelier A, Ritou M (2018) Cutting force model for machining of CFRP laminate with diamond abrasive cutter. Production Eng 12:279–287
Kilic ZM, Altintas Y (2016) Generalized mechanics and dynamics of metal cutting operations for unified simulations. Int J Mach Tool Manu 104:1–13
Kim P, Seok J (2012) Bifurcation analyses on the chatter vibrations of a turning process with state-dependent delay. Nonlinear Dynam 69(3):891–912
Stepan G, Dombovari Z (2011) Identification of cutting force characteristics based on chatter experiments. CIRP Ann-Manuf Techn 60(1):113–116
Xu W, Wu XR, Yu Y (2017) Weight function, stress intensity factor and crack opening displacement solutions to periodic collinear edge hole cracks. Fatigue Fract Eng M 40:2068–2079
Astakhov VP, Outeiro JC (2005) Modeling of the contact stress distribution at the tool-chip interface. Mach Sci Technol 9(1):85–99
Buchkremer S, Klocke F, Lung D (2015) Finite-element-analysis of the relationship between chip geometry and stress triaxiality distribution in the chip breakage location of metal cutting operations. Simul Model Pract Th 55:10–26
Boujelbene M (2018) Investigation and modeling of the tangential cutting force of the titanium alloy Ti-6Al-4V in the orthogonal turning process. Procedia Manuf 20:571–577
Lu KB, Lian ZS, Gu FS (2018) Model-based chatter stability prediction and detection for the turning of a flexible workpiece. Mech Syst Signal Process 100:814–826
Kumar S, Singh B (2018) Prediction of tool chatter and metal removal rate in turning operation on lathe using a new merged technique. J Braz Soc Mech Sci 40(2):53–63
Song QH, Ai X, Tang WX (2011) Prediction of simultaneous dynamic stability limit of time-variable parameters system in thinwalled workpiece high-speed milling processes. Int J Adv Manuf Technol 55(9–12):883–889
Kim HS, Ehmann KF (2016) A cutting force model for face milling operations. Int J Mach Tool Manu 33(5):651–673
Dikshit MK, Puri AB, Maity A (2017) Chatter and dynamic cutting force prediction in high-speed ball end milling. Mach Sci Technol 21(2):291–312
Zhang XW, Yu TB, Wang WS (2018) Prediction of cutting forces and instantaneous tool deflection in micro end milling by considering tool run-out. Int J Mech Sci 136:124–133
Jauregui JC, Resendiz JR, Thenozhi S, Szalay T (2018) Frequency and time-frequency analysis of cutting force and vibration signals for tool condition monitoring. IEEE Acess 6(99):6400–6410
Gao J, Song QH, Liu Z (2018) Chatter detection and stability region acquisition in thin-walled workpiece milling based on CMWT. Int J Adv Manuf Technol 2018:1–15
Luo M, Luo H, Axinte D, Liu D, Mei J, Liao Z (2018) A wireless instrumented milling cutter system with embedded PVDF sensors. Mech Syst Signal Process 110:556–568
Khasawneh FA, Munch E (2016) Chatter detection in turning using persistent homology. Mech Syst Signal Process 70-71:527–541
Funding
The authors received financial supports from the National Natural Science Foundation of China (no. 51575319, 51875320), Young Scholars Program of Shandong University (no. 2015WLJH31), the United Fund of Ministry of Education for Equipment Pre-research (no. 6141A02022116), and the Key Research and Development Plan of Shandong Province (no. 2018GGX103007).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Wu, Y., Song, Q., Liu, Z. et al. Stability of turning process with a distributed cutting force model. Int J Adv Manuf Technol 102, 1215–1225 (2019). https://doi.org/10.1007/s00170-018-2949-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-2949-y