Abstract
In a product life cycle, the tolerances present major impacts on the quality and cost of mechanisms. This paper presents an innovative methodology for tolerance allocation. The proposed approach allows tolerance integration in a computer-aided design (CAD) model, while considering functional and manufacturing requirements in an early phase of digital mock-up (DMU). The purpose is to consider the manufacturing process in the tolerance allocation using tools for the study and analysis of reliability of the design or the process, as the Failure Mode, Effects and Criticality Analysis (FMECA) and Ishikawa diagram. The results lead to the broadening tolerance values of difficult machined dimensions while respecting the functional requirements. Thus, the total cost of assembly decreases. The model is validated through a case study of tolerance allocation using various approaches.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R.C. Hillyard (1978) Dimensions and tolerances in shape design, Ph.D. Dissertation, Computer Laboratory, University of Cambridge.
Weill R, Clement R, Hocken R (1988) Tolerancing for function. Annals of the CIRP 37(2):603–610
Hong YS, Chang TC (2002) A comprehensive review of tolerancing research. Int J of Production Research 40:2425–2459
Chase KW, Greenwood WH (1988) Design issues in mechanical tolerance analysis. Manufacturing Review 1:50–59
Z. Dong (1997) Tolerance Synthesis by Manufacturing Cost Modeling and Design Optimization. In: H.C. Zhang (ed.), Advanced Tolerancing Techniques (Wiley): 233–260.
Fathi Y, Mittal RO, Cline JE (1997) Alternative manufacturing sequences and tolerance buildup. Int J of Production Research 35:123–136
Greenwood WH, Chase KW (1987) New tolerance analysis method for designers and manufacturers. J. Eng. Ind 109:112–116
Greenwood WH, Chase KW (1990) Root sum squares tolerance analysis with non-linear problems. J Eng Ind 112:382–384
S.D. Nigam, J. U. Turner (1995) Review of statistical approaches to tolerance analysis, Computer Aided Design 276–1.
Hassani A, Aifaoui N, Benamara A, Samper S (2008) Tolerance analyses and optimisations methodology in integrated design: TOL-ANALYSES. Mecanique & industries 5:381–395
Beaucaire P, Gayton N, Duc E, Lemaire M, Dantan J (2012) Statistical tolerance analysis of a hyperstatic mechanism, using system reliability methods. Comput Ind Eng 63:1118–1127
Taguchi G, S. Chowdury, Y. Wu, Taguchi’s (2005) Quality Engineering Handbook. Part III: Quality Loss Function, John Wiley & Sons.
Chase KW, Greenwood WH, Loosli BG, Loren HF (1990) Least cost tolerance allocation for mechanical assemblies with automated process selection. Manufacturing Review 3(1):49–59
Dong Z, Hu W, Xue D (1994) New production cost tolerance models for tolerance synthesis. J of Eng for Indu: Transactions of the ASME 116(2):199–206
Wu Z, Elmaraghy WH, El Maraghy HA (1988) Evaluation of cost tolerance algorithms for design tolerance analysis and synthesis. Manufacturing Review 1(3):168–179
Islam MN (2003) Concurrent engineering offers the best solution to tolerance allocation problem. New engineering journal 6(1):14–15
Prabhaharan G, Asokan P, Ramesh P, Rajendran S (2004) Genetic-algorithm-based optimal tolerance allocation using a least-cost model. Int. Journal of Advanced Manufacturing Technology 24:647–660
Muthu P, Dhanalakshmi V, Sankaranarayanasamy K (2009) Optimal tolerance design of assembly for minimum quality loss and manufacturing cost using metaheuristic algorithms. Int. Journal of Advanced Manufacturing Technology 44(11):1154–1164
Huang MF, Zhong YR, Xu ZG (2005) Concurrent process tolerance design based on minimum product manufacturing cost and quality loss. Int. J of Adv Manuf Technol 25(7–8):714–722
Lu C, Zhao WH, Yu SJ (2012) Concurrent tolerance design for manufacture and assembly with a game theoretic approach, Int. J of Adv Manuf Technol 62(1):303–316
Cheng KM, Tsai JC (2011) Optimal statistical tolerance allocation of assemblies for minimum manufacturing cost. Applied Mechanics and Materials 52–54:1818–1823
Cheng KM, Tsai JC (2013) Optimal statistical tolerance allocation for reciprocal exponential cost-tolerance function. Proceedings of the institution of mechanical engineers. Part B: J of Eng Manuf 227(5):650–656
Prabhaharan G, Asokan P, Rajendran S (2005) Sensitivity- based conceptual design and tolerance allocation using the continuous ants colony algorithm (CACO). Int J of Adv Manuf Technol 25(5):516–526
K Sivakumar, C. Balamurugan, S. Ramabalan (2010) Concurrent multi-objective tolerance allocation of mechanical assemblies considering alternative manufacturing process selection. Int J of Adva Manuf Technol 53(5–8): 711–732.
Ramesh L, Padmanaban KP, Ganesh Kumar S, Balamurugan C (2016) Design and optimization of concurrent tolerance in mechanical assemblies using bat algorithm. J Mech Sci Technol 30(6):2601–2614
Zong Y, Mao J (2015) Tolerance optimization design based on the manufacturing costs of assembly quality. Procedia CIRP 27:324–329
Dinesh S, Kamlesh P (2013) Simultaneous optimization of tolerances for prismatic part assembly in different stack up conditions. Int J of Mining, Metallurgy & Mechanical Engineering 1(2):183–186
L. R. Kumar, K.P. Padmanaban, C. Balamurugan (2016) Least cost–tolerance allocation based on Lagrange multiplier, Concurrent Engineering: Research and Applications 1–14.
Prabhaharan G, Asokan P, Ramesh P et al (2004) Genetic algorithm-based optimal tolerance allocation using least cost model. Int. J of Adv Manuf Technol 24(9):647–660
Singh PK, Jain SC, Jain PK (2005) Advanced optimal tolerance design of mechanical assemblies considering interrelated dimension chains and process precision limits. Comput Ind 56(2):179–194
K. Sivakumar, C. Balamurugan, S. Ramabalan, S. B. Venkata raman (2009) Optimal concurrent dimensional and geometrical tolerancing based on evolutionary algorithms. In: Proceedings of the world congress on nature and biologically inspired computing (NaBIC), Coimbatore, India: 300–305.
M. S. kumar, S.M. Kannan, V. Jayabalan (2009) A new algorithm for optimum tolerance allocation of complex assemblies with alternative processes selection, Int J of Adv Manuf Technol 40(7–8): 819–836.
Kumar MS, Stalin B (2009) Optimum tolerance synthesis for complex assembly with alternative process selection using Lagrange multiplier method. Int J of Adv Manuf Technol 44(3):405–411
Rao RV, More KC (2014) Advanced optimal tolerance design of machine elements using teaching-learning-based optimization algorithm. Production & Manufacturing Research 2(1):71–94
Wang GD, Yang Y, Wang W, Si-Chao LV (2016) Variable coefficients reciprocal squared model based on multi-constraints of aircraft assembly tolerance allocation. Int J of Adv Manuf Technol 82:227–234
Zhao YM, Liu DS, Wen ZJ (2016) Optimal tolerance design of product based on service quality loss. Int J Adv Manuf Technol 82:1715–1724
Ji S, Li X, Ma Y, Cai H (2000) Optimal tolerance allocation based on fuzzy comprehensive evaluation and genetic algorithm. Int J of Adv Manuf Technol 16:461–468
Kumar A, Choi SK, Goksel L (2011) Tolerance allocation of assemblies using fuzzy comprehensive evaluation and decision support process. Int Journal of Advanced Manufacturing Technology 55:379–391
Wang Y, Zhai WJ, Yang LP, Wu WG, Ji SP, Ma YL (2007) Study on the tolerance allocation optimization by fuzzy-set weight-center evaluation method. Int J of Adv Manuf Technol 33:317–322
Liu M, Liu C, Xing L, Mei F, Zhang X (2016) Study on a tolerance grading allocation method under uncertaintyand quality oriented for remanufactured parts. Int J Adv Manuf Technol 87:1265–1272
Tlija M, Louhichi B, BenAmara A (2013) Evaluating the effect of tolerances on the functional requirements of assemblies. Mechanics & Industry 14:191–206
B. Anselmetti, H. Louati H (2013) Generation of manufacturing tolerancing with ISO standards. J Mach Tools Manuf 45: 1124–1131.
Zha XF, Lim SYE, Fok SC (1998) Integrated intelligent design and assembly planning: a survey. Int J of Adv Manuf Technol 14:664–685
Trabelsi A, Delchambre A (2000) Assessment on tolerance representation and tolerance analysis in assemblies. Concurrent Engineering: Research and Applications 8(4):244–262
Lim SS, Ibh L, Len L (1995) Computer-aided concurrent Design of Product and Assembly Processes: a literature review. J Design and Manuf 5:67–88
Basilio RB, Jorge PA, Jorge GP (2015) A tolerance analysis and optimization methodology. The combined use of 3D CAT, a dimensional hierarchization matrix and an optimization algorithm. Int J of Adv Manuf Technol 81:371–385
Sampath K. R, N. Alagumurth, R. Ramesh (2010) Integrated optimization of machining tolerance and Asymmetric quality loss cost for Rotor key base assembly, International conference on recent advances in Mechanical Engineering (ICRAME2010), Kanyakumari, India.
Sampath KR, Alagumurthi N, Ramesh R (2009) Calculation of Total cost, tolerance based on Taguchi’s, asymmetric quality loss function approach. American J of Engineering and Applied Sciences 2(4):628–634
Noorul Haq A, Sivakumar K, Saravanan R, Muthiah V (2005) Tolerance design optimization of machine elements using genetic algorithm. Int J of Adv Manufa Technol 25(3):385–391
Corless RM, Gonnet GH, Hare DEG, Jeffrey DJ, Knuth DH (1996) On the Lambert W function. Advances in Computation Mathematics:5329–5359
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ghali, M., Tlija, M., Aifaoui, N. et al. A CAD method for tolerance allocation considering manufacturing difficulty based on FMECA tool. Int J Adv Manuf Technol 91, 2435–2446 (2017). https://doi.org/10.1007/s00170-016-9961-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9961-x