Abstract
In order to improve product quality and enhance economic returns, the research about tolerance allocation under multi-constraints including assembly and manufacturing accuracy is done. On the basis of cost-tolerance relationship, this paper introduces variable coefficients reciprocal squared model (VCRSM) into tolerance allocation process and thus constructs the tolerance allocation optimization objective model. Aiming at resolving multi-constraints problem within allocation process, the penalty items are added into allocation optimization objective model, and an analytic equation based on multi-constraints is proposed. The equation is solved using the Newton iteration method in consideration of the assembly and manufacturing accuracy constraints. Finally, a tolerance allocation instance about aircraft door component assembly is given. The numerical results show the method can achieve optimal tolerance allocation and the VCRSM is more suitable than other cost-tolerance models in multi-constraints tolerance allocation.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Andolfatto L, Thiébaut F, Lartigue C, Douilly M (2014) Quality-and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly. J Manuf Syst 33(1):103–115
González I, Sánchez I (2009) Statistical tolerance synthesis with correlated variables. Mech Mach Theory 44(6):1097–1107
Chang WT, Wu LI (2013) Tolerance analysis and synthesis of cam-modulated linkages. Math Comput Model 57(3):641–660
Mansuy M, Giordano M, Hernandez P (2011) A new calculation method for the worst case tolerance analysis and synthesis in stack-type assemblies. Comput Aided Des 43(9):1118–1125
Chase KW, Greenwood WH, Loosli BG, Hauglund LF (1990) Least cost tolerance allocation for mechanical assemblies with automated process selection. Manuf Rev 3(1):49–59
Sutherland GH, Roth B (1975) Mechanism design. In: accounting for manufacturing tolerances and costs in function generating problems. J Eng Ind ASME 97:283–286
Yeo SH, Ngoi BKA, Chen H (1996) A cost-tolerance model for process sequence optimization. Adv Manuf Technol 12:423–431
Diplaris SC, Sfantsikopoulos MM (2000) Cost-tolerance function a new approach for cost optimum machining accuracy. Adv Manuf Technol 16:32–38
Liu S, Jin Q, Liu C (2013) Analytical solutions method for statistical tolerance optimization model. Comput Integr Manuf Syst 19(11):2736–2741
Liu S, Liu C, Xie R (2013) Optimum solutions to statistical tolerance based on the effectiveness of assembly constraint. J Tianjin Univ Sci Technol 28(5):70–74
Liu S, Jin Q (2011) Tolerance design considering the resources and environment characters during manufacturing process. Comput Integr Manuf Syst 17(7):1415–1419
Edel DH, Auer TB (1964) Determine the least cost combination for tolerance accumulations in a drive shaft seal assembly. Gen Mot Eng J 4:37–38
Chase KW, Greenwood WH (1988) Design issues. In: mechanical tolerance analysis manufacturing review. ASME 1(1):50–59
Spotts MF (1973) Allocation of tolerances to minimize cost of assembly. J Eng Ind ASME
Speckhart FH (1972) Calculation of tolerance based on a minimum cost approach. J Eng Ind ASME
Michael W, Siddall JN (1981) The optimization problem with optimal tolerance assignment and full acceptance. J Mech Des ASME 103:842–848
Michael W, Siddall JN (1982) The optimal tolerance assignment with less than full acceptance. J Mech Des ASME 104(4):855–860
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Gd., Yang, Y., Wang, W. et al. Variable coefficients reciprocal squared model based on multi-constraints of aircraft assembly tolerance allocation. Int J Adv Manuf Technol 82, 227–234 (2016). https://doi.org/10.1007/s00170-015-7299-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-015-7299-4