Abstract
This paper presents a new approach for cutting force denoising in micro-milling condition monitoring. In micro-milling, the comparatively small cutting force signal is contaminated by heavy noise, and as a result, it is necessary to denoise the force signal before further processing it. The traditional denoising methods, based on Gaussian noise assumption, are not effective in this situation because the noise is found to contain high non-Gaussian component. Based on the force and noise's sparse structures in the time–frequency domain, this approach employs a sparse decomposition approach and solves denoising as a convex optimization problem. It is shown that the proposed approach can separate the heavy non-Gaussian noise and recover useful information for condition monitoring.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Dornfeld D, Min S, Takeuchi Y (2006) Recent. Adv Mech Micromachining, CIRP Ann–Manuf Technol 55(2):745–768
Teti R, Jemielniak KO, Donnell G, Dornfeld D (2010) Advanced monitoring of machining operations. CIRP Ann–Manuf Technol 59(2):717–739
Abellan-Nebot JV, Subirón FR (2010) A review of machining monitoring systems based on artificial intelligence process models. Int J Adv Manuf Technol 47(1–4):237–257
Deiab I, Assaleh K, Hammad F (2009) On modeling of tool wear using sensor fusion and polynomial classifiers. Mech Syst Signal Process 23(5):1719–1729
Ai CS, Sun YJ, He GW, Ze XB, Li W, Mao K (2012) The milling tool wear monitoring using the acoustic spectrum. Int J Adv Manuf Technol 61(5–8):457–463
Cuneyt Aliustaoglu H, Ertunc M, Ocak H (2009) Tool wear condition monitoring using a sensor fusion model based on fuzzy inference system. Mech Syst Signal Process 23(2):539–546
Jemielniak K, Arrazolain PJ (2008) Application of AE and cutting force signals in tool condition monitoring in micro-milling. CIRP J Manuf Sci Technol 1(2):97–102
Cho S, Binsaeid S, Asfour S (2010) Design of multisensor fusion based tool condition monitoring system in end milling. Int J Adv Manuf Technol 46(5–8):681–694
Bhattacharyya P, Sengupta D, Mukhopadhyay S (2007) Cutting force-based real-time estimation of tool wear in face milling using a combination of signal processing techniques. Mech Syst Signal Process 21(6):2665–2683
Zhu KP, Hong GS, Wong YS (2011) Multiscale singularity analysis of cutting forces for micromilling tool-wear monitoring. IEEE Trans Ind Electron 58(6):2512–2521
Hsieh Wan-Hao L, Ming-Chyuan CS-J (2012) Application of backpropagation neural network for spindle vibration-based tool wear monitoring in micro-milling. Int J Adv Manuf Technol 61(1–4):53–61
Huang SN, Tan KK, Wong YS, Silva CW, Goh HL, Tan WW (2007) Tool wear detection and fault diagnosis based on cutting force monitoring. Int J Mach Tool Manuf 47(3–4):444–451
Palanisamy P, Rajendran I, Shanmugasundaram S (2008) Prediction of tool wear using regression and ANN models in end-milling operation. Int J Adv Manuf Technol 37(1–2):29–41
Tobon-Mejia DA, Medjaher K, Zerhouni N (2012) CNC machine tool's wear diagnostic and prognostic by using dynamic Bayesian networks. Mech Syst Signal Process 28(4):167–182
Tansel IN, Rodriguez O, Trujillo M, Paz E, Li W (1998) Micro-end-milling—I. wear and breakage. Int J Mach Tools Manuf 38(12):1419–1436
Zhang JZ, Chen JC (2008) Tool condition monitoring in an end-milling operation based on the vibration signal collected through a microcontroller-based data acquisition system. Int J Adv Manuf Technol 39(1–2):118–128
Malekian M, Park SS, Jun Martin BG (2009) Tool wear monitoring of micro-milling operations. J Mater Process Technol 209(10):4903–4914
Sevilla-Camacho P, Herrera-Ruiz G, Robles-Ocampo J, Jáuregui-Correa J (2011) Tool breakage detection in CNC high-speed milling based in feed-motor current signals. Int J Adv Manuf Technol 53(9):1141–1148
Afazov SM, Ratchev SM, Segal J, Popov AA (2012) Chatter modeling in micro-milling by considering process nonlinearities. Int J Mach Tool Manuf 56(5):28–38
Shi Y, Mahr F, von Wagner U, Uhlmann E (2012) Chatter frequencies of micromilling processes: influencing factors and online detection via piezoactuators. Int J Mach Tool Manuf 56(5):10–16
Bisu CF, Zapciu M, Cahuc O, Gérard A, Anica M (2012) Envelope dynamic analysis: a new approach for milling process monitoring. Int J Adv Manuf Technol 62(5–8):471–486
Yun HT, Heo S, Lee MK, Min B-K, Lee SJ (2011) Ploughing detection in micromilling processes using the cutting force signal. Int J Mach Tool Manuf 51(5):377–382
Ryu SH (2012) An analytical expression for end milling forces and tool deflection using Fourier series. Int J Adv Manuf Technol 59(1–4):37–46
Jung S-C, Kim M-S, Yang Y (2012) Baseband noise reduction method using captured TX signal for UHF RFID reader applications. IEEE Trans Ind Electron 59(1):592–598
Rosado-Munoz A, Bataller-Mompean M, Soria-Olivas E, Scarante C, Guerrero-Martinez JF (2011) FPGA Implementation of an adaptive filter robust to impulsive noise: two approaches. IEEE Trans Ind Electron 58(3):860–870
Zhu KP, Wong YS, Hong GS (2009) Multi-category micro-milling tool wear monitoring with continuous hidden Markov models. Mech Systems Signal Process 23(2):547–560
Serviere C, Fabry P (2004) Blind source separation of noisy harmonic signals for rotating machine diagnosis. J Sound Vib 272(1–2):317–339
Zhu KP, Hong GS, Wong YS, Wang WH (2008) Cutting force denoising in micro-milling tool condition monitoring. Int J Prod Res 46(16):4391–4408
Mallat S. G. (2008) A wavelet tour of signal processing: the sparse way, 3rd edition, Academic Press
Donoho DL (2006) Compressed sensing. IEEE Trans Inf Theory 52(4):1289–1306
Plumbley MD, Blumensath T, Daudet L, Gribonval R, Davies ME (2010) Sparse representations in audio and music: from coding to source separation. Proc IEEE 98(6):995–1005
Aharon M, Elad M, Bruckstein AM (2006) The K-SVD: an algorithm for designing of overcomplete dictionaries for sparse representations. IEEE Trans Signal Process 54(11):4311–4322
Zibulevsky M, Pearlmutter BA (2001) Blind source separation by sparse decomposition in a signal dictionary. Neural Comput 13(4):863–882
Mairal J, Bach F, Ponce J, Sapiro G, Zisserman A (2008) Supervised dictionary learning. the Neural Inf Process Systems (NIPS) 21:1033–1040
Huang K, Aviyente S (2007) Sparse representation for signal classification. The Neural Inf Process Systems (NIPS) 19:609–617
Yang M, Zhang L, Feng X, Zhang D (2011) Fisher discrimination dictionary learning for sparse representation. IEEE Int Conf Comput Vis (ICCV) 2011:543–550
Daubechies I, Roussos E, Takerkart S, Benharrosh M, Golden C, D'Ardenne K, Richter W, Cohen JD, Haxby J (2009) ICA Algorithms for fMRI do NOT select for independence. Proc Nat Acad Sci (PNAS) 106(26):10415–10422
Debnath L., Mikusinski P. (2005) Introduction to Hilbert Spaces with Applications, 3rd Edition, Academic Press
Tibshirani R (1996) Regression shrinkage and selection via the lasso. J Royal Statist Soc B 58(1):267–288
Efron B, Johnstone I, Hastie T, Tibshirani R (2002) Least angle regression. Ann Stat 32(2):407–499
Candès E, Romberg J, Tao T (2006) Robust uncertainty principles: exact signal reconstruction from highly incomplete frequency information. IEEE Trans Inf Theory 52(2):489–509
Cohen A, Dahmen W, DeVore R (2009) Compressed sensing and best k-term approximation. J Am Math Soc 22(1):211–231
Theodoridis S., Koutroumbas K. (2003) Pattern Recognition, Academic Press
Elad M, Aharon M (2006) Image denoising via sparse and redundant representations over learned dictionaries. IEEE Trans Image Process 15(12):3736–3745
Donoho DL, Johnstone IM (1995) Adapting to unknown smoothness via wavelet shrinkage. J Am Stat Assoc 90(432):1200–1224
Averkamp R, Houdr C (2003) Wavelet thresholding for non-necessarily Gaussian noise: idealism. Ann Stat 3(1):110–151
Hyvarinen A., Karhunen J., Oja E. (2001) Independent Component Analysis, Wiley
Author information
Authors and Affiliations
Corresponding author
Appendix
Appendix
Rights and permissions
About this article
Cite this article
Zhu, K., Vogel-Heuser, B. Sparse representation and its applications in micro-milling condition monitoring: noise separation and tool condition monitoring. Int J Adv Manuf Technol 70, 185–199 (2014). https://doi.org/10.1007/s00170-013-5258-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5258-5