Abstract
Tool wear prediction plays an important role in industry for higher productivity and product quality. Flank wear of cutting tools is often selected as the tool life criterion as it determines the diametric accuracy of machining, its stability and reliability. This paper focuses on two different models, namely, regression mathematical and artificial neural network (ANN) models for predicting tool wear. In the present work, flank wear is taken as the response (output) variable measured during milling, while cutting speed, feed and depth of cut are taken as input parameters. The Design of Experiments (DOE) technique is developed for three factors at five levels to conduct experiments. Experiments have been conducted for measuring tool wear based on the DOE technique in a universal milling machine on AISI 1020 steel using a carbide cutter. The experimental values are used in Six Sigma software for finding the coefficients to develop the regression model. The experimentally measured values are also used to train the feed forward back propagation artificial neural network (ANN) for prediction of tool wear. Predicted values of response by both models, i.e. regression and ANN are compared with the experimental values. The predictive neural network model was found to be capable of better predictions of tool flank wear within the trained range.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Kwon Y, Fischer GW (2003) A novel approach to quantifying tool wear and tool life measurements for optimal tool management. Int J Mach Tools Manuf 43:359–368
Oraby SE, Hayhurst DR (2004) Tool life determination based on the measurement of wear and tool force ratio variation. Int J Mach Tools Manuf 44:1261–1269
Shao H, Wang HL, Zhao XM (2004) A cutting power model for tool wear monitoring in milling. Int J Mach Tools Manuf 44:1503–1509
Richetti A, Machado AR, Da Silva MB, Ezugwu EO, Bonney J (2004) Influence of the number of inserts for tool life evaluation in face milling of steels. Int J Mach Tools Manuf 44:695–700
Kuo RJ (2000) Multi-sensor integration for on-line monitoring tool wear estimation through artificial neural networks and fuzzy neural network. Eng Appl Artif Intell 13:249–261
Srinivasa Pai P, Nagabhushana TN, Ramakrishna Rao PK (2001) Tool wear estimation using resource allocation network. Int J Mach Tools Manuf 41:673–685
Choudhury SK, Bartarya G (2003) Role of temperature and surface finish in predicting tool wear using neural network and design of experiments. Int Journal of Mach Tools Manuf 43:747–753
Koshy P, Dumitrescu P, Ziada Y (2004) Novel methods for rapid assessment of tool performance in milling. Int J Mach Tools Manuf 44:1599–1605
Wang ZG, Wong YS, Rahman M (2005) High-speed milling of titanium alloys using binderless CBN tools. Int J Mach Tools Manuf 45:105–114
Choa S, Asfoura S, Onarb A, Kaundinyaa N (2005) Tool breakage detection using support vector machine learning a milling process. Int J Mach Tools Manuf 45:241–249
Huang P-T, Chen JC, Chou C-Y (1999) A statistical approach in detecting tool breakage in end milling operations. J Ind Technol 15:1–7
Srinivas J, Rama Kotaiah K (2005) Tool wear monitoring with indirect methods. Manuf Technol Today India 4:7–9
Chattopadhyay AB, Roy S (1996) Evaluation of wear of turning carbide inserts using neural networks. Int J Mach Tools Manuf 36:789–797
Pekelharing AJ (1978) The exit failure in interrupted cutting. CIRP Ann 27:5–10
Lou K-N, Lee C-T (1995) An intelligent on-line tool monitoring system in milling processes. IEEE T Neural Networ 1/95:2651–2656
Brezak D, Udiljak T, Mihoci K, Majetic D, Novakovic B, Kasac J (2004) Tool wear monitoring using radial basis function neural network. IEEE T Neural Networ 1/04:1859–1862
ISO (1993) Tool-life testing with single-point turning tools. ISO 3685:1993(E), 2nd edn. International Organization for Standards, Geneva
Shaw MC (2005) Metal cutting principles. Oxford University Press, New York
International Organization for Standardization ISO 8688 - 2 (1989), first edition. Tool life testing in milling - part 2, end milling
Quality America (1998), Software reference manual, D.O.E. - PC IV. Quality America Inc., Tucson, AZ, USA
Box GEP, Hunter WG (1978) Statistics for experiments: an introduction to design data analysis and model building. Wiley, New York
Eldem S, Barrow G (1976) Tool life in interrupted turning operations, Israel. J Technol 14:172–178
Bhatia SM, Pandey, PC, Shan HS (1979) Failure of cemented carbide tools in intermittent cutting. J Precision Eng 148–152
Baskar G, Ramamoorthy NV (2004) Artificial neural network: an efficient tool to simulate the profitability of state transport undertakings. Indian J Transport Manage 28(2):243–257
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Palanisamy, P., Rajendran, I. & Shanmugasundaram, S. Prediction of tool wear using regression and ANN models in end-milling operation. Int J Adv Manuf Technol 37, 29–41 (2008). https://doi.org/10.1007/s00170-007-0948-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-007-0948-5