Abstract
Laser beam welding (LBW) is a field of growing importance in industry with respect to traditional welding methodologies due to lower dimension and shape distortion of components and greater processing velocity. Because of its high weld strength to weld size ratio, reliability and minimal heat affected zone, laser welding has become important for varied industrial applications. With increased use of laser welding in continuous mode, there will be increased dependence on the use of equations to predict the dimensions of the weld bead. In this paper, the development of mathematical equations using a three factor 5- level factorial technique to predict the geometry of weld bead in butt joint of austenitic stainless steel 304 sheet of 2.5 mm thickness are presented. The models developed have been checked for their significance by using F-test and t-test. The direct and interaction effect of the process variables on bead geometry are presented in graphical form for quick analysis.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Steen WM (1991) Laser material processing. Springer, Berlin Heidelberg New York
Dawes C (1992) Laser welding. Abington, New York
Chang WS, Na SJ (2001) Prediction of laser spot weld shape by numerical analysis and neural network. Metallurgical Mater Trans 32(B):723–731
Benyounis KY, Olabi AG, Hashmi MSJ (2005) Effect of laser welding parameters on the heat input and weld bead profile. J Mater Process Technol pp 978–985
Benyounis KY, Olabi AG, Hashmi MSJ (2005) Optimizing the laser welded butt joints of medium carbon steel using RSM. J Mater Process Technol pp 986–989
Murugan N, Parmar RS (1994) Effect of MIG process parameters on the geometry of the bead in the automatic surfacing of stainless steel. J Mater Process Technol 41:381–398
Murugan N, Parmar RS, Sud SK (1993) Effect of submerged arc process variables on dilution and bead geometry in single wire surfacing. J Mater Process Technol 37:767–780
Jeng J-Y, Mau T-F (2000) Prediction of laser butt joint welding parameters using back propagation and learning vector quantization networks. J Mater Process Technol pp 207−218
Correia DS, Goncalves CV, da Cunha SS, Ferraresi VA (2005) Comparison between genetic algorithms and response surface methodology in GMAW welding optimization. J Mater Process Technol 160:70–76
Cochran WG, Cox GM (1963) Experimental designs. Asia Pub House, Bombay
Marimuthu K, Murugan N (2003) Prediction and optimization of weld bead geometry of plasma transferred arc hard faced valve seat wires. Surface Eng J 19:143–149
Leonard M (1996) Laser material processing. Dekker, New York
Acknowledgements
The authors wish to thank Welding Research Institute, Trichy for providing the facilities for conducting trials. They also wish to thank the management of Coimbatore Institute of Technology and Government College of Technology, Coimbatore for having provided all the necessary facilities for the completion of the work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Manonmani, K., Murugan, N. & Buvanasekaran, G. Effects of process parameters on the bead geometry of laser beam butt welded stainless steel sheets. Int J Adv Manuf Technol 32, 1125–1133 (2007). https://doi.org/10.1007/s00170-006-0432-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-006-0432-7