Abstract
An iterative 2D finite-element-based optimization procedure has been developed which incorporates robust design philosophies. This has been used to determine precise free-form shapes for a hole in a plate example, with the aim of maximizing its fatigue-life when exposed to varying load orientations. Past methods have typically considered only a single nominal load orientation, with empirical approaches to deal with the orientation variability, thus resulting in suboptimal solutions. Here a robust stress method is developed that produces a notch shape that minimizes the peak stress and renders it constant for a range of load orientations. Furthermore, a more sophisticated robust fatigue-damage optimization method is then developed to minimize the peak fatigue damage for a given stochastic distribution of load orientations. Fatigue calculations for an example problem with significant load orientation variation show that the robust optimization methods provide fatigue-life extensions 2 to 8 times better than past methods. It is anticipated that the implementation of robust optimal shapes in metallic components would result in greater fatigue-life extension.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Baud, R.V. 1934: Fillet profiles for constant stress. Prod Eng (April), 133–134
Burchill, M.; Heller, M. 2004a: Optimal notch shapes for loaded plates. J Strain Anal39(1), 99–116
Burchill, M.; Heller, M. 2004b: Optimal free-form shapes for constrained holes in loaded plates. (for publication in Int J Fatigue)
Chandu, S.V.L.; Grandhi, V. 1995: General purpose procedure for reliability based structural optimization under parametric uncertainties. Adv Eng Softw23, 7–14
Chaperon, P.; Jones, R.; Heller, M.; Pitt, S.; Rose, F. 2000: A methodology for structural optimisation with damage tolerance constraints. J Eng Fail Anal7, 281–300
Dhir, S.K. 1981: Optimisation in a class of hole shapes in plate structures. J Appl Mech48, 905–908
Durelli, A.J.; Rajaiah, K. 1979: Quasi-square hole with optimum shape in an infinite plate subjected to in-plane loading. Oakland University ONR Report No. 49
Fanni, M.; Schnack, E.; Grunwald, J. 1994: Shape optimization of dynamically loaded machine parts. Int J Press Piping 59, 281–297
Grunwald, J.; Schnack, E. 1997: A fatigue model for shape optimization. Struct Optim14, 36–44
Heller, M.; Burchill, M.; McDonald, M.; Watters, K.C. 2001: Shape Optimisation of Critical Fuel Flow Vent Holes in the F-111 Wing Pivot Fitting. DSTO-TR-1120, Defence Science and Technology Organisation, Melbourne, Australia
Herskovits, J.; Dias, G.P.; Mota Soares C.M. 1996: A Full Stress Technique for Structural Optimization. Appl Math Comp Sci J Shape Optim Sci Comp 6(2), 303–319
Heywood, R.B. 1945: Photo-Elasticity and Design Problems (Part II). Aircr Eng17, 226–228
Kaye, R.; Heller, M. 1997: Structural Shape Optimization by Iterative Finite Element Solution. DSTO-RR-0105, Defence Science and Technology Organisation, Melbourne, Australia
Kristensen, E.S.; Madsen, N.F. 1976: On the Optimum Shape of Fillets in Plates Subjected to Multiple In-plane Loading Cases. Int J Numer Methods Eng 10, 1007–1019
Mattheck, C.; Burkhardt, S. 1990: A new method of structural shape optimisation based on biological growth. Int J Fatigue 12(3), 185–190
McDonald, M.; Heller, M.; Goldstraw, M.; Hew, A. 2001: Robustness of the F-111 Wing Pivot Fitting Optimal Rework Shapes. DSTO-TR-1121, Defence Science and Technology Organisation, Melbourne, Australia
Melchers, R.E. 2001: Optimality-criteria-based probabilistic structural design, Struct Multidisc Optim23, 34–39
Miner, M.A. 1945: Cumulative damage in fatigue. Trans ASME 67, A159–A164
Neuber, H. 1969: Der zugbeanspruchte Flachstab mit optimalem Querschnittsübergang. Forschung im Ingenieurwesen35(1), 29–30
Parkinson, A.; Sorensen, C.; Pourhassan, N. 1993: A General Approach for Robust Optimal Design. J Mech Des115, 74–80
Phadke, M.S. 1989: Quality engineering using robust design, NJ: Prentice Hall
Roa, S.S. 1979: Optimization Theory and Applications, NJ: John Wiley Eastern
Schnack, E. 1979: An optimization procedure for stress concentrations by the finite element technique. Int J Numer Methods Eng14, 115–124
Schnack, E.; Sporl, U. 1986: A mechanical dynamic programming algorithm for structural optimisation. Int J Numer Methods Eng. 23, 1985–2004
Taguchi, G.; Elsayed, E.; Hsiang, T. 1989: Quality Engineering in Production Systems, NY: McGraw-Hill
Vigdergauz, S.B; Cherkayev, A.V. 1986: A hole in a plate optimal for its biaxial tension-compression. J Appl Math Mech 50(3), 401–404 (English Translation)
Waldman, W.; Heller, M.; Chen, G. 2001: Optimal free-form fillet shapes for tension and bending. Int J Fatigue23, 509–523
Waldman, W.; Heller, M.; McDonald, M.; Chen, G. 2002: Developments in rework shape optimisation for life extension of aging airframes. 3rd Australasian Cong. Appl. Mech. World Scientific 695–702, Sydney, Australia
Waldman, W.; Heller, M.; Rose L.R.F 2003: Shape optimisation of two closely spaced holes for fatigue life extension. DSTO-RR-0253, Defence Science and technology Organisation, Melbourne Australia
Xie, Y.M.; Steven, G.P. 1992: Optimal design of multiple load case structures using an evolutionary procedure, Finite Element Analysis Research Centre, University of Sydney, Australia
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
McDonald, M., Heller, M. Robust shape optimization of notches for fatigue-life extension. Struct Multidisc Optim 28, 55–68 (2004). https://doi.org/10.1007/s00158-004-0437-5
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-004-0437-5