Abstract
This paper is devoted to the problem of designing mechanical components of brittle materials such as ceramics using the Weibull probabilistic treatment of brittle strength combined with finite element based design optimization and mathematical programming. The analysis of probability of failure using Weibull statistics is introduced and expressions for design sensitivity analysis are derived. The numerical finite element based implementation is discussed, and a numerical example is used to verify the facilities for analysis and design sensitivity analysis. Finally, a shape optimization example of redesigning a cutting bit from a circular saw blade illustrates a design case where the objective is to reduce the probability of failure.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Andreasen, J. 1993: Statistics of brittle failure in multiaxial stress states.J. Amer. Ceramic Soc. 76, 2933–2935
Andreasen, J. 1994: Reliability-based design of ceramics.Materials & Design 15, 3–13
Evans, A. 1978: A general approach to the statistical analysis of multiaxial fracture.J. Amer. Ceramic Soc. 61, 302–308
Koski, J.; Silvennoinen, R. 1990: Multicriteria design of ceramic components. In: Eschenauer, H. A.; Koski, J.; Osyczka, A. (eds.)Multicriteria design optimization, pp. 447–463. Berlin, Heidelberg, New York: Springer
Lund, E. 1994:Finite element based design sensitivity analysis and optimization. Ph.D. Thesis, Aalborg University, Denmark
Lund, E.; Olhoff, N. 1994: Shape design sensitivity analysis of eigenvalues using “exact” numerical differentiation of finite element matrices.Struct. Optim. 8, 52–59
McLean, A.F.; Hartsock, D.L. 1989: Design with structural ceramics. In: Wachtman, J.B. (ed.)Structural mechanics, pp. 22–97. London: Academic Press
Olhoff, N.; Rasmussen, J.; Lund, E. 1993: A method of “exact” numerical differentiation for error elimination in finite element based semi-analytical shape sensitivity analysis.Mech. Struct. & Mach. 21, 1–66.
Rasmussen, J.; Lund, E. 1997: The issue of generality in design optimization systems.Eng. Opt. (to appear)
Rasmussen, J.; Lund, E.; Olhoff, N. 1993: Integration of parametric modeling and structural analysis for optimum design. In: Gilmore, B.J.; Hoeltzel, D.A.; Azarm, S.; Eschenauer, H.A. (eds.)Advances in design automation, pp. 637–648. New York: The American Society of Mechanical Engineers
Vardar, Ö.; Finnie, I. 1975: An analysis of the Brazilian disk fracture test using the Weibull probabilistic treatment of brittle strength.Int. J. Fracture 11, 495–508
Weibull, W. 1939. A statistical theory of the strength of materials.Ingeniörs Vetenskaps Akademien, Handlingar 151, 5–45
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lund, E. Shape optimization using Weibull statistics of brittle failure. Structural Optimization 15, 208–214 (1998). https://doi.org/10.1007/BF01203533
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF01203533