Abstract
This paper presents the effects of welding process parameters on weld bead penetration for the gas metal arc welding (GMAW) process. Welding process parameters included wire diameter, gas flow rate, welding speed, arc current and welding voltage. The experimental results have shown that weld bead penetration increased as wire diameter, arc current and welding voltage increased, whereas an increase in welding speed was found to decrease the weld bead penetration. However, the weld bead penetration is not affected significantly by gas flow rate changes. Mathematical equations for study of the relationship between welding process parameters and weld bead penetration have also been computed by employing a standard statistical package program, SAS.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
C. E. Jackson and A. E. Shrubsall, “Control penetration and melting rate with welding technique”,Welding Journal 32(4), 172-s–179-s, 1953.
R. L. Apps, L. M. Gourd and K. A. Nelson, “Effect of welding variables upon bead shape and size in submerged-arc welding”,Welding and Metal Fabrication 11, pp. 453–445, 1963.
J. C. McGlone and D. B. Chadwick, “The submerged arc butt welding of mild steel Part 2: The prediction of weld bead geometry from the procedure parameters”,The Welding Institute Report, 80/1978/PE, 1978.
W. H. Giedt and L. N. Tallerico, “Prediction of electron beam depth of penetration”,Welding Journal 67(12), pp. 299-s–305-s, 1988.
E. A. Metzbower, “Penetration depth in laser beam welding”,Welding Journal 72(8), pp. 403-s–407-s, 1993.
A. A. Shirali and K. C. Mills, “The effect of welding parameters on penetration in GTA welds”,Welding Journal 72(7), pp. 347-s–353-s, 1993.
P. Burgardt and C. R. Heiple, “Welding penetration sensitivity to welding variables when near full joint penetration”,Welding Journal 71(9), pp. 341-s–34-s, 1992.
A. E. Bentley and S. J. Marburger, “Arc welding penetration control using quantitative feedback theory”,Welding Journal 71(11), pp. 397-s–405-s, 1992.
T. Hinata, K. Yasuda, Y. Kasuga and T. Onzawa, “Study of penetration using a stationary TIG arc: Low-speed DC-TIG welding”,Welding International 7(3), pp. 189–194, 1993.
U. Dilthey, G. Habedank, T. Reichel, W. Sudnik and I. Andrej, “Numerical simulation of the metal-arc active gas welding process”,Welding and Cutting 3, pp. E50-E53, 1993.
U. Lübbert, “Influencing the process of arc welding by adaptive control of welding parameters”,Welding and Cutting 11, pp. E201-E204, 1992.
J. Raveendra and R. S. Parmar, “Mathematical models to predict weld bead geometry for flux cored arc welding”,Metal Construction 1978, pp. 31R-35R, 1987.
G. E. P. Box, W. H. Hunter and J. S. Hunter,Statistics for Experimenters: An Introduction to Design Data Analysis and Model Building 10th edn, John Wiley and Sons, New York, pp. 165–240, 1987.
D. C. Montgomery,Design and Analysis of Experiments, 2nd edn, John Wiley and Sons, New York, pp. 387–433, 1984.
SAS Institute,SAS/STAT User's Guide, 1988 edn, SAS Institute Inc., Cary, NC, 1988.
N. Christensen, V. de L. Davies and K. Gjermundsen, “Distribution of temperatures in arc welding”,British Weld Journal 12, pp. 54–75, 1965.
D. K. Roberts and A. A. Wells, “Fusion welding of aluminium alloys”,British Weld Journal 1, pp. 533–560, 1954.
R. S. Chandel, “Mathematical modelling of gas metal arc weld features”,Modeling and Control of Casting and Welding Processes IV: Proceedings International Conference on Modeling of Casting and Welding Process, Palm Coast, Florida, 17–22 April, pp. 109–120, 1988.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kim, I.S., Basu, A. & Siores, E. Mathematical models for control of weld bead penetration in the GMAW process. Int J Adv Manuf Technol 12, 393–401 (1996). https://doi.org/10.1007/BF01186927
Issue Date:
DOI: https://doi.org/10.1007/BF01186927