Abstract
An analytical solution is obtained for the stationary temperature profile in a polymeric melt flowing into a cold cavity, which also takes into account viscous heating effects. The solution is valid for the injection stage of the molding process. Although the analytical solution is only possible after making several (at first sight) rather stringent assumptions, the calculated temperature field turns out to give a fair agreement with a numerical, more realistic approach. Approximate functions were derived for both the dissipation-independent and the dissipation-dependent parts which greatly facilitate the temperature calculations. In particular, a closed-form expression is derived for the position where the maximum temperature occurs and for the thickness of the solidified layer.
The expression for the temperature field is a special case of the solution of the diffusion equation with variable coefficients and a source term.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
Abbreviations
- a :
-
\(\frac{\lambda }{{\varrho c}}\) thermal diffusivity [m2/s]
- c :
-
specific heat [J/kg K]
- D :
-
channel half-height [m]
- L :
-
channel length [m]
- m :
-
1/ν
- P :
-
pressure [Pa]
- T :
-
temperature [°C]
- T W :
-
wall temperature [°C]
- T i :
-
injection temperature [°C]
- T A :
-
Br independent part of T
- T B :
-
Br dependent part of T
- T core :
-
asymptotic temperature
- v z(ξ):
-
axial velocity [m/s]
- W :
-
channel width [m]
- x :
-
cross-channel direction [m]
- z :
-
axial coordinate [m]
- Λ(x):
-
gamma function
- γ (a, x):
-
incomplete gamma function
- M(a, b, x):
-
Kummer function
- ε:
-
small parameter
- ϑ(χ):
-
temperature function
- λ:
-
thermal conductivity [W/mK]
- μ:
-
viscosity [Pa · s]
- μ0 :
-
consistency index
- η:
-
power-law exponent
- ϱ:
-
density [kg/m]
- χ:
-
similarity variable
- Br:
-
\(= \frac{{\mu _0 D}}{{\lambda (T_i - T_w )}}\left( {\frac{{(m + 2)\left\langle {\upsilon _z } \right\rangle }}{D}} \right)^{{{(m + 1)} \mathord{\left/{\vphantom {{(m + 1)} m}} \right.\kern-\nulldelimiterspace} m}}\) Brinkman number
- Gz:
-
\(= \frac{{\left\langle {\upsilon _z } \right\rangle D^2 }}{{aL}}\) Graetz number
- ′:
-
\(= \frac{{T - T_w }}{{T_i - T_w }}\)
References
Abramowitz M, Stegun IA (1972) Handbook of mathematical functions. Dover, New York
Alles H, Philipon S, Agassant JF, Vincent M (1986) Experimental and theoretical study of the filling stage of a rectangular plaque: application to a spiral mold. Pol Proc Eng 4:71–96
Buchholz H (1953) Die Konfluente Hypergeometrische Funktion. Springer, Berlin, p 37
Flaman AAM (1990) Build-up and relaxation of molecular orientation in injection moulding. PhD Thesis, Eindhoven Technical Univ
Janeschitz-Kriegl H (1979) Injection moulding of plastics. II Analytical solution of heat transfer problem. Rheol Acta 18:693–701
Lévêque MA (1928) Les lois de la transmission de la chaleur par convection. Ann Mines 13:201, 305, 381
Newman J (1969) Extension of the Lévêque solution. J Int Heat Transfer 91:177–178
Pearson JRA (1985) Mechanics of polymer processing. Ch 19: Injection moulding. Elsevier Appl Sci Publ, London
Pearson JRA, Richardson SM (1983) Computational analysis of polymer processing. Applied Science Publ, London
Richardson SM (1979) Extended Lévêque solutions for power law fluids in pipes and channels. Int J Heat Mass Transfer 22:1417–1423
Richardson SM (1983) Injection moulding of thermoplastics: freezing during mould filling. Rheol Acta 22:223–236
Ryan ME, Chung TS (1980) Conformal mapping analysis of injection mold filling. Pol Eng Sci 20:642–651
Van Wijngaarden H, Dijksman JF, Wesseling P (1982) Non-isothermal flow of a molten polymer in a narrow rectangular cavity. J Non-Newtonian Fluid Mech 11:175–199
Wales JLS (1972) Some aspects of orientation in injection moulded objects. Pol Eng Sci 12:358–363
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jansen, K.M.B., van Dam, J. An analytical solution for the temperature profiles during injection molding, including dissipation effects. Rheola Acta 31, 592–602 (1992). https://doi.org/10.1007/BF00367013
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00367013