Abstract
A new local coordinate system is introduced for the assumed strain formulation so that the resulting shell element can pass both the patch test and the locking test. The coordinate system is tested by implementing it in two nine-node assumed strain shell elements. The elements adopting the new local coordinate system not only pass various patch tests successfully but also perform well in locking tests.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
BergmannV. L.; MukherjeeS. 1990: A hybrid strain finite element for plates and shells. Int. J. Num. Meth. Eng. 30: 233–257
BoresiA. P.; SidebottomO. M.; SeelyF. B.; SmithJ. O. 1978: Advanced mechanics of materials 3rd. Ed. New York: John Wiley and Sons
BelytschkoT.; WongB. L. 1989: Assumed strain stabilization procedure for the 9-Node lagrange shell element. Int. J. Num. Meth. Eng. 28: 385–414
ChangT. Y.; SaleebA. F.; GrafW. 1989: On the mixed formulation of a 9-Node lagrange shell element. Comp Meth. Appl. Mech. Eng. 73: 259–281
HuangH. C.; HintonE. H. 1986: A new nine node degenerated shell element with enhanced membrane and shear interpolation. Int. J. Num. Meth. Eng. 22: 73–92
JangJ.; PinskyP. M. 1987: An assumed covariant strain based 9-Node shell element. Int. J. Num. Meth. Eng. 24: 2389–2411
KaneT. R.; LinkinsP. W.; LevinsonD. A. 1983: Spacecraft dynamics, New York: McGraw-Hill
LeeS. W.; PianT. H. H. 1978: Improvement of plate and shell finite element by mixed formulations. AIAA J. 16: 29–34
ParkK. C.; StanleyG. M. 1986. A curved, C0 shell element based on assumed natural-coordinate strains. J. Appl. Mech. 53: 278–290
Park, H. C.; Lee, S. W. 1994: Geometrically nonlinear assumed strain shell element model with six degrees of freedom per node. 35th AIAA/ASME/ASCE/AHS structures, structural dynamics and materials conference, Hilton Head, SC, U.S.A., April 18–21
Park, H. C. 1994: An efficient geometrically nonlinear sssumed strain shell element model with six degrees of freedom per node. Ph.D. Dissertation, Dept. Aero., Univ., of Maryland
PunchE. F.; AtluriS. N. 1984: Development and testing of stable, invariant, isoparametric curvilinear 2- and 3-D hybrid-stress elements. Comp. Meth. Appl. Mech. Eng. 47: 331–356
RhiuJ. J.; LeeS. W. 1987: A new efficient mixed formulation for thin shell finite element models. Int. J. Num. Meth. Eng. 24: 581–604
Roark, R. J.; Young, W. C. 1975: Formulars for stress and strain, 5th. Ed.: McGraw-Hill
RubensteinR.; PunchE. F.; AlturiS. N. 1982: An analysis of, and remedies for, kinematic modes in hybrid-stress finite elements: selection of stable, invariant stress fields. Comp. Meth. Appl. Mech. Eng. 38: 63–92
TimoshenkoS. P.; Woinowsky-KriegerS. 1959. Theory of plate and shells, 2nd Ed., New York: McGraw-Hill
XueW. M.; KarlovitzL. A.; AtluriS. N. 1985. On the Existence and Stability Conditions for Mixed-Hybrid Finite Element Solutions based on Reissner's Variational Principle. Int. J. Solids and Structures, 21: 97–116
YeomC. H.; LeeS. W. 1989: An assumed strain element model for large deflection composite shells. Int. J. Num. Meth. Eng. 28: 1749–1768
YeomC. H.; LeeS. W. (1991): On strain assumption in a finite element model for plates and shells. Int. J. Num. Meth. Eng. 31: 287–305
Author information
Authors and Affiliations
Additional information
Communicated by S. N. Athuri, 7 July 1994
The present work was supported in part by the Office of Naval Research (Noo14-89-J-3059) with Dr. Roshdy Barsoum as the program monitor.
Rights and permissions
About this article
Cite this article
Park, H.C., Lee, S.W. A local coordinate system for assumed strain shell element formulation. Computational Mechanics 15, 473–484 (1995). https://doi.org/10.1007/BF00350359
Issue Date:
DOI: https://doi.org/10.1007/BF00350359