Abstract
Evaluation of defects in heterogeneous materials, such as cellulose-fiber composites, can lead to methods for improving strength. Full-field displacement measurement techniques, e.g., digital image correlation and electronic speckle pattern interferometry, provide useful information by which defects can be evaluated. Inverse Methods (IM) have been used to determine material properties from full-field displacement data. In homogenous materials, the resulting system of equations relating displacements with applied load and constitutive properties is overdetermined and is solved with traditional least squares methods. However, heterogeneous materials create an underdetermined system that cannot be addressed in the same way. Numerically simulated heterogeneous, orthotropic materials were evaluated in a 2-D finite element model, and the resulting nodal displacements were used as input to an IM algorithm. The algorithm determined local moduli, Ex and Ey, with errors, ranging from 9% to 20%. Errors in calculated Gxy were greater. Techniques for reducing error are provided. Simulations suggested IM can be an important tool in defect evaluation given full-field displacement measurements.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Hull, D., and Bacon, D. J., 2001, Introduction to dislocations, Butterworth-Heinemann, Oxford [Oxfordshire] ; Boston.
Westerlind, B. S., Carlsson, L. A., and Andersson, Y. M., 1991, "Fracture toughness of liner board evaluated by the J-integral," Journal of Materials Science, 26(10), pp. 2630-2636.
Fellers, C., 1993, "Fracture toughness - a new paper property," Papier, 47(7), pp. A345-A352.
Batchelor, W. J., and Wanigaratne, D. M. S., 2003, "A New Cyclic Loading Method for Measuring Sheet Fracture Toughness," International Journal of Fracture, 123(1-2), pp. 15-27.
Chasiotis, I., and Knauss, W. G., 2003, "The mechanical strength of polysilicon films: Part 2. Size effects associated with elliptical and circular perforations," Journal of the Mechanics and Physics of Solids, 51(8), pp. 1551-1572.
Avril, S., and Pierron, F., 2007, "General framework for the identification of constitutive parameters from fullfield measurements in linear elasticity," International Journal of Solids and Structures, 44(14-15), pp. 4978-5002.
Le Magorou, L., Bos, F., and Rouger, F., 2002, "Identification of constitutive laws for wood-based panels by means of an inverse method," Composites Science and Technology, 62(4), pp. 591-596.
Molimard, J., Le Riche, R., Vautrin, A., and Lee, J. R., 2005, "Identification of the four orthotropic plate stiffnesses using a single open-hole tensile test," Experimental Mechanics, 45(5), pp. 404-411.
Genovese, K., Lamberti, L., and Pappalettere, C., 2005, "Improved global-local simulated annealing formulation for solving non-smooth engineering optimization problems," International Journal of Solids and Structures, 42(1), pp. 203-237.
Sutton, M. A., Yan, J. H., Avril, S., Pierron, F., and Adeeb, S. M., 2008, "Identification of heterogeneous constitutive parameters in a welded specimen: Uniform stress and virtual fields methods for material property estimation," Experimental Mechanics, 48(4), pp. 451-464.
Avril, S., Huntley, J. M., Pierron, F., and Steele, D. D., 2008, "3D heterogeneous stiffness reconstruction using MRI and the virtual fields method," Experimental Mechanics, 48(4), pp. 479-494.
Szilard, R., 1974, Theory and analysis of plates: classical and numerical methods, Prentice-Hall, Englewood Cliffs, N.J.,.
Dodson, C., 1968, "A contribution to the development of a statistical rheology of bonded fibrous networks,"Doctoral, Brunel University.
Choi, D., Thorpe, J. L., and Hanna, R. B., 1991, "Image-analysis to measure strain in wood and paper," Wood Science and Technology, 25(4), pp. 251-262.
Lyne, M., and Hazell, R., 1973, "Formation Testing as a Means of Monitoring Strength Uniformity," The Fundamental Properties of Paper Related to its Uses, Trans. Vth Fund. Res. Symp., F. Bolam, ed., FRC,
Manchester, UK, 2003, Cambridge, UK, pp. 74-100.
Bun, M., 2009, "Applications of the Levenberg-Marquardt Algorithm to the Inverse Problem," http://www.math.washington.edu/~reu/papers/2009/mark/reupaper.pdf, p. 21.
Avril, S., Bonnet, M., Bretelle, A. S., Grediac, M., Hild, F., Ienny, P., Latourte, F., Lemosse, D., Pagano, S., Pagnacco, E., and Pierron, F., 2008, "Overview of identification methods of mechanical parameters based on full-field measurements," Experimental Mechanics, 48(4), pp. 381-402.
Baum, G. A., Brennan, D. C., and Habeger, C. C., 1981, "Orthotropic elastic constants of paper," Tappi Journal, 64(8), pp. 97-101.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Considine, J.M., Vahey, D.W., Matthys, D., Rowlands, R.E., Turner, K.T. (2013). An Inverse Method for Analyzing Defects in Heterogeneous Materials. In: Proulx, T. (eds) Application of Imaging Techniques to Mechanics of Materials and Structures, Volume 4. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-9796-8_44
Download citation
DOI: https://doi.org/10.1007/978-1-4419-9796-8_44
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4419-9528-5
Online ISBN: 978-1-4419-9796-8
eBook Packages: EngineeringEngineering (R0)