Abstract
This paper presents the designing steps and simulation results of a pulse classification system for the ECDM process using artificial neural networks (ANN). An Electro Discharge Machining (EDM) machine was modified by incorporating an electrolyte system and by modifying the control system. Gap voltage and working current waveforms were obtained. By observing the waveforms, pulses were classified into five groups. A feed forward neural network was trained to classify pulses. Various neural network architectures were considered by changing the number of neurons in the hidden layer. The trained neural networks were simulated. A quantitative analysis was performed to evaluate various neural network architectures.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
References
Bermak, A. and Bouzerdoum, A. (2002), VLSI Implementation of a Neural Network Classifier Based on the Saturating Linear Activation Function, 9thInternational Conference on Neural Information Processing.
De Silva A.K.M, (1988), Process Developments in Electrochemical Arc Machining, PhD Thesis, University of Edinburgh.
De Silva A.K.M, Khayry A.B. and McGeough J.A. (1995), Process Monitoring and Control of Electroerosion-dissolution Machining, IMechE Conference Transactions, 11th International Conference on Computer-Aided Production Engineering, pp. 73–78.
Kao, J.Y. and Tarng, Y.S. (1997), A neural network approach for the on-line monitoring of the electrical discharge machining process, Journal of Material Processing Technology 69, pp. 112–119.
Liu, H.S. and Tarng, Y.S. (1997), Monitoring of the electrical discharge machining process by adaptive networks. International Journal of Advanced Manufacturing Technology 13, pp. 264–270.
Mediliyegedara, T.K.K.R., De Silva, A.K.M., Harrison, O.K., McGeough, J.A. (2004), An Intelligent Pulse Classification System for Electro Chemical Discharge Machining (ECDM) – A Preliminary Study, 14th International Symposium for Electromachining (ISEM-XIV), Edinburgh, U.K.
Pajak, E. and Wieczorowski, K. (1998), Classification of Discharges in Electocontact Discharge Machining (ECDM) by Means of Neural Networks, 12th International Symposium for Electro Machining (ISEM XII), Aachen, Germany, pp 225–232.
Tasi, K.M. and Wang, P.J. (2001), Comparisons of neural network models on material removal rate in electrical discharge machining. Journal of Materials Processing Technology, pp. 111–124.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer
About this paper
Cite this paper
Mediliyegedara, T., De Silva, A., Harrison, D., McGeough, J., Hepburn, D. (2006). Designing Steps and Simulation Results of a Pulse Classification System for the Electro Chemical Discharge Machining (ECDM) Process – An Artificial Neural Network Approach. In: Abraham, A., de Baets, B., Köppen, M., Nickolay, B. (eds) Applied Soft Computing Technologies: The Challenge of Complexity. Advances in Soft Computing, vol 34. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-31662-0_27
Download citation
DOI: https://doi.org/10.1007/3-540-31662-0_27
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-31649-7
Online ISBN: 978-3-540-31662-6
eBook Packages: EngineeringEngineering (R0)