Abstract
The text of the following chapters comprises six lectures given at the International Centre for Mechanical Sciences (CISM) in Udine, July 19 – 30, 1982, as part of the course “The Constitutive Law in Thermoplasticity” which has been coordinated by Professor Th. Lehmann.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Engesser, F.: Über die Knickfestigkeit gerader Stäbe, Z. Architektur und Ingenieurwesen, 35, 455, 1889
Engesser, F.: Über Knickfragen, Schweizerische Bauzeitung, 26, 24, 1895
Jasinski, F.: Noch ein Wort zu den Knickfragen, Schweizerische Bauzeitung, 25, 172, 1895
Considière, A.: Résistance des pièces comprimées, Congrès International des Procédés de Construction, Paris, 1891, 371
v. Karman, T.: Untersuchungen über Knickfestigkeit, Mitteilungen über Forschungsarbeiten VDI 81, 1910
Shanley, F. R.: The column paradox, J. Aero. Sci., 13, 678, 1946
Shanley, F. R.: Inelastic column theory, J. Aero. Sci., 14, 261, 1947
v. Karman, T.: Comments on Shanley’s paper, J. Aero. Sci., 14, 267, 1947
Sewell, M. J.: A survey of plastic buckling, in “Stability”, SM Study No. 6, Leipholz, H. H. E., Ed., University of Waterloo, 1972, 85
Storâkers, B.: Uniqueness and stability at finite deformation of inelastic solids, Publ. 186, The Royal Institute of Technology, 1973
Hutchinson, J. W.: Plastic buckling, in “Advances in Applied Mechanics”, Vol. 14, Yih, C.-S., Ed., Academic Press, 1974, 67
Storskers, B.: On uniqueness and stability of elastic plastic deformation Arch. Mechanics, 27, 821, 1975
Hill, R.: Aspects of invariance in solid mechanics, in “Advances in Applied Mechanics” Vol. 18, Yih, C.-S., Ed., Academic Press, 1978, 1
Hornbogen, E.: Werkstoffe, Springer-Verlag, 1979
Pflüger, A.: Stabilitätsprobleme der Elastostatik, Springer-Verlag, 1975
Hill, R.: A general theory of uniqueness and stability in elastic-plastic solids, J. Mech. Phys. Solids, 6, 236, 1958
Hill, R.: Some basic principles in the mechanics of solids without a natural time J. Mech. Phys. Solids, 7, 209, 1959
Hill, R.: Bifurcation and uniqueness in non-linear mechanics of continua, in “Problems of Continuum Mechanics” N.I. Muskhelishvili Volume, Soc. Ind. Appl. Math, Philadelphia, 1961, 155
Hill, R.: Uniqueness criteria and extremum principles in selfadjoint problems of continuum mechanics, J. Mech. Phys. Solids, 10, 185, 1962
Hill, R.: On the classical constitutive relations for elastic/plastic solids, in “Recent Progress in Applied Mechanics”, F.K.G. Odqvist Volume, Wiley, N.Y., 1967, 241
Miles, J. P.: Fluid-pressure eigenstates and bifurcation in tension specimens under lateral pressure, J. Mech. Phys. Solids, 21, 145, 1973
Storskers, B.: On uniqueness and stability under configuration-dependent loading of solids with or without a natural time, J. Mech. Phys. Solids, 25, 269, 1977
Bruhns, O. and Th. Lehmann: Optimum deformation rate in large inelastic deformations, in “Metal Forming Plasticity”, Springer-Verlag, 1979, 120
Raniecki, B. and O. T. Bruhns: Bounds to bifurcation stresses in solids with non-associated plastic flow law at finite strain, J. Mech. Phys. Solids, 29, 153, 1981
Ariaratnam, S. T. and R. N. Dubey: Instability in an elastic-plastic cylindrical shell under axial compression, J. Appl. Mech., 36, 47, 1969
Ariaratnam, S. T. and R. N. Dubey: Some cases of bifurcation in elastic-plastic solids in plane strain, Quart. Appl. Math., 27, 349, 1969
Bruhns, O. und K. Thermann: Verzweigungslasten elastoplastischer Kreisplatten, Acta Mech., 20, 247, 1974
Bruhns, O. und. J. Mielnicznk: Zur Theorie der Verzweigungen nicht-isothermer elastoplastischer Deformationen, Ing.-Archiv, 46, 65, 1977
Bruhns, O.: Verzweigungslasten inelastischer Schalen, ZAMM, 57, 165, 1977
Bruhns, O.: On the stability of thin-walled pressure vessels, Nucl. Engng. Design, 58, 359, 1980
Chakrabarty, J.: Plastic buckling of cylindrical shells subjected to external fluid pressure, ZAMP, 24, 270, 1973
Cheng, S. Y., S. T. Ariaratnam and R. N. Dubey: Axisymmetric bifurcation in an elastic-plastic cylinder under axial load and lateral hydrostatic pressure, Quart. App. Math., 29, 41, 1971
Dubey, R. N.: Instabilities in elastic-plastic tubes, Int. J. Solids Struct., 5, 699, 1969
Dubey, R. N. and S. T. Ariaratnam: Bifurcation in elastic-plastic solids in plane stress, Quart. Appl. Math., 27, 381, 1969
Hill, R. and J. W. Hutchinson: Bifurcation phenomena in the plane tension test, J. Mech. Phys. Solids, 23, 239, 1975
Hutchinson, J. W. and J. P. Miles: Bifurcation analysis of the onset of necking in an elastic/plastic cylinder under uniaxial tension, J. Mech. Phys. Solids, 22, 61, 1974
Miles, J. P.: Bifurcation in plastic flow under uniaxial tension, J. Mech. Phys. Solids, 19, 89, 1971
Miles, J. P.: The initiation of necking in rectangular elastic/plastic specimens under uniaxial and biaxial tension, J. Mech. Phys. Solids, 23, 197, 1975
Neale, K. W.: A method for the estimation of plastic buckling loads, Int. J. Solids Struct., 10, 217, 1974
Needleman, A. and V. Tvergaard: Necking of biaxially stretched elastic-plastic circular plates, J. Mech. Phys. Solids, 25, 159, 1977
Storskers, B.: On buckling of axisymmetric thin elastic-plastic shells, Int. J. Solids Struct., 11, 1329, 1975
Young, N. J. B.: Bifurcation phenomena in the plane compression test, J. Mech. Phys. Solids, 24, 77, 1976
Oeynhausen, H.: Verzweigungslasten elastoplastisch deformierter, dickwandiger Kreiszylinder unter Innendruck und Axialkraft, Mitt. Institut f. Mechanik, No. 29, RU Bochum, 1981
Bruhns, O.: Some remarks on the stability of extremely loaded pressure vessels, in “Mechanics of Inelastic Media and Structures” Mahrenholtz, O. and Sawczuk, A., Eds., Polish Academy of Sciences, 1982, 87
Maier, G. and T. Hueckel: Nonassociated and coupled flow rules of elastoplasticity for rocklike materials, Int. J. Rock Mech. Min. Sci., 16, 77, 1979
Needleman, A.: Non-normality and bifurcation in plane strain tension and compression, J. Mech. Phys. Solids, 27, 231, 1979
Raniecki, B.: Uniqueness criteria in solids with non- associated plastic flow laws at finite deformations, Bull. Acad. Polon. Sci., ser. sci. techn., 27, 391, 1979
Marciniak, Z. and K. Kuczynski: Limit strains in the process of stretch forming sheet metal, Int. J. Mech. Sci., 9, 609, 1967
Stören, S. and J. R. Rice; Localized necking in thin sheets, J. Mech. Phys. Solids, 23, 421, 1975
Hutchinson, J. W. and V. Tvergaard: Surface instabilities on statically strained plastic solids, Int. J. Mech. Sci., 22, 339, 1980
Hutchinson, J. W. and V. Tvergaard: Shear band formation in plane strain, Int. J. Solids Struct., 17, 451, 1981
Tvergaard, V., Needleman, A. and K. K. Lo: Flow localization in the plane strain tensile test, J. Mech. Phys. Solids, 29, 115, 1981
Rice, J. R.: The localization of plastic deformation, in “Theoretical and Applied Mechanics”, Proc. 14th IUTAM Congr., Koiter, W. T., Ed., North-Holland, 1976, 207
Rice, J. R. and J. W. Rudnicki: A note on some features of the theory of localization of deformation, Int. J. Solids Struct., 16, 597, 1980
Rudnicki, J. W. and J. R. Rice: Conditions for the localization of deformation in pressure-sensitive dilatant materials, J. Mech. Phys. Solids, 23, 371, 1975
Needleman, A. and J. R. Rice: Limits to ductility set by plastic flow localization, in: “Mechanics of Sheet Metal Forming” Koistinen, D. P. and Wang, N.-M., Eds., Plenum Publ., 1978, 237
Hutchinson, J. W. and K. W. Neale: Sheet-necking II. Time-independent behavior, in: “Mechanics of Sheet Metal Forming” Koistinen, D. P. and Wang, N.-M., Eds., Plenum Publ., 1978, 127
Bruhns, O. und B. Raniecki: Ein Schrankenverfahren bei Verzweigungsproblemen inelastischer Form-änderungen, ZAMM, 62, T111, 1982
Bruhns, O.: Bounds to the critical stresses in bifurcation of cylindrical specimens in the case of non-associated flow laws, in “Stability in the Mechanics of Continua”, Springer-Verlag, 1982, 46
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 1984 Springer-Verlag Wien
About this chapter
Cite this chapter
Bruhns, O.T. (1984). Bifurcation Problems in Plasticity. In: Lehmann, T. (eds) The Constitutive Law in Thermoplasticity. CISM International Centre for Mechanical Sciences, vol 281. Springer, Vienna. https://doi.org/10.1007/978-3-7091-2636-3_9
Download citation
DOI: https://doi.org/10.1007/978-3-7091-2636-3_9
Publisher Name: Springer, Vienna
Print ISBN: 978-3-211-81796-4
Online ISBN: 978-3-7091-2636-3
eBook Packages: Springer Book Archive