Abstract
Elasto-plastic analysis of a strip with a hole under tension is a classical problem in computational plasticity. It was studied experimentally by Theocaris and Marketos (1964) and was first analyzed using finite element methods by Marcal and King (1967) and Zienkiewicz, Valliappan and King (1969). This problem was also studied by Narisawa (1991) and Yu and Zeng (Yu, 1998). The results were described by many authors, such as Zienkiewicz (1971), Zienkiewicz and Taylor (2000; Zienkiewicz and Taylor 2009) and Yu (1998; 2004). The Huber-von Mises criterion for non-SD materials was used before 1994. The results can be adopted only for those materials which have identical strength both in tension and compression and the shear strength equals τy=0.577 σy. It cannot be used for most materials, especially geomaterials. The twin-shear strength theory was used for elasto-plastic analysis of a strip with a hole under tension and compression for non-SD materials and SD materials by Yu and Zeng (Yu, 1998). The unified yield criterion was studied for elasto-plastic analysis of a strip with a hole under tension for non-SD materials by Yu (Yu, 2004). The analytical results obtained using various yield criteria are very different. The shape and size of the plastic zone as well as the slip angle are influenced strongly by the choice of the yield criterion. It is necessary to use a new efficient criterion.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Frieman PA and Pan J (2000) Effects of plastic anisotropic and yield criteria on prediction of forming limit curves. Int. J. Mech. Sci., 42: 29–48.
Hopperstad OS, Berstad T, Listad H and Lademo OG (1998) The effects of different yield criteria on local deformations in numerical simulation of profile forming. J. Materials Processing Technology, pp 80–81, 551–555.
Humpheson C and Naylor DJ (1975) The importance of the form of the failure criterion. C/R/243/75, University of Wales: Swansea, UK.
Kuroda M and Tvergaard V (2000) Forming limit diagram for anisotropic metal with different yield criteria. Int. J. Solids Structures, 37: 5037–5059.
Lee YK and Ghosh J (1996) The significance of J3 to the prediction of shear bands. Int. J. of Plasticity, 12(9): 1179–1197.
Marcal P.V and I. P King (1967) Elastic-plastic analysis of two dimensional stress systems by the finite element method. Int. J. Mech. Sci., 9: 143–55.
Mean ME and Hutchinson JW (1985) Influence of yield surface curvation on flow localization in dilatant plasticity. Mechanics of Materials, 4: 395–407.
Moin K and Pankaj (1998) Post-peak behavior simulation using different failure theories. Strength Theory: Applications, Developments and Prospects for the 21st Century. Yu MH and Fan SC eds. Science Press: New York, Beijing, pp 1121–1126.
Narisawa I (1991) Crazing and shear deformation of polymer alloys. In: Jono M and Inoue T eds, Mechanical Behaviour of Materials-VI, 3: 311–318.
Sturmer G, Schulz A and Wittig S (1991) Life time prediction for ceramic gas turbine components. ASME-Paper, 91-GT-96.
Theocaris P S and E. Marketos (1964) Elastic-plastic analysis of perforated thin strips of a strain hardening material. J. Mech. Phys. Solids, 12: 377–90.
Tvergaard V (1987) Effect of yield surface curvation and void nucleation on plastic flow localization. J. Mech. Phys. Solids, 35: 43–60.
Wang F and Fan SC (1998) Limit pressures of thick-walled tubes using different yield criteria. Strength Theory: Applications, Developments and Prospects for the 21st Century. Yu MH and Fan SC eds. Science Press: New York, Beijing, pp 1.
Yu MH (1983) Twin shear stress yield criterion. Int. J. Mech. Sci., 25(1): 71–74.
Yu MH, He LN and Song LY (1985) Twin shear stress theory and its generalization. Scientia Sinica (Sciences in China), English edn. Series A, 28(11): 1174–1183.
Yu MH et al (1992) Computer image analysis of the plastic zone of structure. J. of Xi’an Jiaotong University, 26(2): 121–123 (in Chinese).
Yu MH et al (1998) Constitutive model: from single shear to tri-shear to twin-shear to unification. Chinese Journal of Rock Mechanics and Engineering, 17 (Suppl.) 739–743 (in Chinese, English abstract).
Yu MH et al (1998) Twin-shear Theory and its Applications. Science Press: Beijing. (in Chinese).
Yu MH (2004) Unified Strength Theory and its Applications. Springer: Berlin.
Yu MH et al (2006) Generalized Plasticity. Springer: Berlin.
Zheng SJ (1990) Research on the Static and Fatigue Strength of Concrete under Combined Stresses. Master’s Dissertation of Xi’an Jiaotong University, Xi’an, China (in Chinese).
Zienkiewicz OC, Valliappan S and King IP (1969) Elasto-plastic solution of engineering problems. Initial-stress, finite element approach. Int. J. Num. Meth. in Eng., 1: 75–100.
Zienkiewicz OC (1971) The Finite Element Method in Engineering Science. McGraw-Hill: London.
Zienkiewicz OC and Pande GN (1977) Some useful forms of isotropic yield surfaces for soil and rock mechanics. Finite Elements in Geomechanics. Gudehus G ed. Wiley: London, pp 179–190.
Zienkiewicz OC and Taylor RL (2000) The Finite Element Method. Fifth Ed. Butterworth Heinemann.
Zienkiewicz OC and Taylor RL (2009) The Finite Element Method for Solid and Structural Mechanics. Sixth edn. Elsevier: Amsterdam and Elsevier: Singapore Pte Ltd.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2012 Zhejiang University Press, Hangzhou and Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Yu, MH., Li, JC. (2012). Strip with a Circular Hole under Tension and Compression. In: Computational Plasticity. Advanced Topics in Science and Technology in China. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-24590-9_8
Download citation
DOI: https://doi.org/10.1007/978-3-642-24590-9_8
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-24589-3
Online ISBN: 978-3-642-24590-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)