Abstract
Concrete plasticity has been described by Chen (1982; 1998) and Nielsen (1984; 1989). Several material models were discussed. Yu’s unified strength theory (Yu’s UST or UST) and the UEPP (Unified Elasto-Plastic Program) are successfully used for structural analysis, as has been described in Chapters 6, 7 and 8.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Bresler B and Scordelis AC (1963) Shear strength of reinforced concrete beams. Journal of ACI Proceedings, 60(1): 51–72.
Chen WF (1982) Plasticity in Reinforced Concrete. McGraw-Hill: New York.
Chen WF (1998) Concrete plasticity: past, present and future. In: Strength Theory: Applications, Developments and Prospects for the 21st Century, Yu MH and Fan SC eds. Science Press: Beijing, New York, pp 7–48.
Duddeck H, Griebenow G, and Schaper G (1978) Material and Time-Dependent Nonlinear Behavior of Cracked Slabs. In: Nonlinear Behaviour of Reinforced Concrete Spatial Structures. Vol. 1, Preliminary Report, IASS Smp., Darmstadt. Darmstadt (Mehlhorn G, Ruhle H and Zerna W Eds.). Werner-Verlag: Dusseldorf, pp 101–113.
Fan SC, Wang F (2002) A new strength criterion for concrete. ACI Structural Journal, 99, May–June, 317–326.
Figueigas JA, Owen DRJ (1984) Analysis of Elasto-Plastic and Geometrically Nonlinear Anisotropic Plates and Shells. In: Finite Element Software for Plates and Shells (eds. Hinton E., Owen D.R.J.). Prineridge Press: Swansea, UK, pp 235–326.
Gervera M, and Hinton E (1986) Nonlinear Analysis of Reinforced Concrete Plates and Shells Using a Three Dimensional Model. In: Computational Modeling of Reinforced Concrete Structures (eds. Hinton E. and Owen D.R.J.). Pineridge Press: Swansea, U. K.
Gonzalez-Vidosa, Kotsovos FMD and Pavlovic MN (1988) Symmetrical punching of reinforced concrete slabs: An analytical investigation based on nonlinear finite element modeling. ACI Structure Journal, 85(5–6): 241–250.
Guan H and Loo YC (1997b) Layered finite element method in cracking and failure analysis of RC beams and beam-column-slab connections. Structural Engineering and Mechanics, 5(5): 645–662.
Guan H and Loo YC (1997a) Flexural and shear failure analysis of reinforced concrete slabs and flat plates, Advances in Structural Engineering, 1(1): 7l–85.
Hinton E, Owen DRJ (1984) Finite Element Software for Plates and Shells. Pineridge Press: Swansea, UK.
Huang HC (1988) Static and Dynamic Analysis of Plates and Shells: Theory Software and Application. Pineridge Press Limited: Swansea, U. K.
Kotsovos MD, Pavlovic MN (1995) Structural Concrete: Finite element analysis for limit-state design. Thomas Tedford Publications, Thomas Telford Services Ltd., Heron Quay, London E14 4JD.
Loo YC and Guan H (1997) Cracking and punching shear failure analysis of RC flat plates. Journal of the Structural Engineering, ASCE, l23(10): 1321–l330.
Marzouk HM, and Hussein A (1991) Experimental Investigation on the Behavior of High-Strength Concrete Slabs. ACI Structural Journal, 88: 701–713.
Nielsen MP (1984, 1999) Limit Analysis and Concrete Plasticity. CRC Press: London.
Ottosen NS (1977) A failure criterion for concrete. ASCE, EM. 4: 103.
Owen DJR, Hinton H (1980) Finite Elements in Plasticity: Theory and Practice. Pineridge Press Limited: Swansea, U. K.
Poh SP and Susanto T (1996) Experimental and analytical investigations on the ultimate strength and serviceability of structural concrete deep beam. Applied Research Project RP15/92, School of Civil and Structural Engineering, Nanyang Technological University, Singapore, pp 353.
Rasmussen LJ and Baker G (1999) A large-scale experimental investigation of deformable RC box beams. ASCE Jnl. Struct. Engrg., 125(3): 227–235.
Regan PE (1986) Symmetric punching of reinforced concrete slabs. Magazine of Concrete Research, 38(136):115–128.
Wang F (1998) Nonlinear Finite Element Analysis of RC Plate and Shell Using Unified Strength Theory. Ph.D. Thesis, Nanyang Technological University, Singapore.
Wang F, Teng S; Fan SC (2001) Softened damage model for finite element analysis of structural concrete deep beams, ACI Structural J., 8(1): 27–35.
Yu MH (1983) Twin shear stress yield criterion. Int. J. Mechanical Sciences, 25(1): 71–74.
Yu MH, He LN and Song LY (1985) Twin shear stress theory and its generalization. Scientia Sinica (Sciences in China), English Edition, Series A, 28(11): 1174–1183.
Yu MH and He LN (1991) A new model and theory on yield and failure of materials under the complex stress state. In: Mechanical Behavior of Materials-6, (ICM-6). Jono M and Inoue T ed. Pergamon Press: Oxford, 3: 841–846.
Yu MH (1992) New System for Strength Theory (in Chinese). Xi’an Jiaotong Umiversity Press: Xi’an, China (in Chinese).
Yu MH (2002) Concrete Strength Theory and iIts Applications (in Chinese). Higher Education Press: Beijing.
Yu MH, Zan YW, Zhao J. Yoshimine M (2002) A unified strength criterion for rock material. Int.J. of Rock Mechanics and Mining Science, 39(6): 975–989.
Yu MH (2004) Unified Strength Theory and Its Applications. Springer: Berlin.
Yu MH et al. (2006) Generalized Plasticity. Springer: Berlin.
Zhang XS, Guan H and Loo YC (2001) UST (Unified Strength Theory) failure criterion for punching shear analysis of reinforcement concrete slab-column connections. In: Computational Mechanics-New Frontiers for New Millennium, Valliappan S. and Khalili N. eds. Elsevier Science Ltd, pp 299–304.
Zhang Bill, Guan H and Loo YC (2002) Unified strength theory for punching shear analyses of edge column-slab connections with stud shear reinforcement. The Second International Conference on Advances in Structural Engineering and Mechanics (ASEM’02), Pusan, Korea, 21–23 August 2002, Eds: Choi, C.K. and Schnobrich, W.C., Techno-Press, CDROM Proceedings, pp 1–8.
Zhou KR and Jiang DH (1991) Imitation of punching failure for reinforced concrete slabs in finite element method. Proc. Computational Mechanics, Hong Kong, pp 221–226.
Zhou XQ (2002) Numerical Analysis of Reinforcement Concrete Using Multi-Surface Strength Model. Ph.D. Thesis at Nanyang Technological University, Singapore.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2012 Zhejiang University Press, Hangzhou and Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Yu, MH., Li, JC. (2012). Reinforced Concrete Beam and Plate. In: Computational Plasticity. Advanced Topics in Science and Technology in China. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-24590-9_15
Download citation
DOI: https://doi.org/10.1007/978-3-642-24590-9_15
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-24589-3
Online ISBN: 978-3-642-24590-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)