Abstract
The circular plate has been used widely as an important structural element in many branches of engineering. Reliable prediction of the load-bearing capacity of circular plates is crucial for optimum structural design. The load-bearing capacity of circular plates by using the Tresca yield criterion and Huber-von Mises criterion has been given by (1954), (1954), and (1994), et al. The design of circular plates based on the plastic limit load was discussed by (1960). Nine cases including a simply supported circular plate, clamped circular plate, annular plate, a built-in at inner edge and simply supported along the outer edge plate, shearing force along the outer edge and built-in at the inner edge, etc. were studied (Hu, 1960). A systematical summary was given by (1960), (1959); (1963), (1972), (1981), (1985) and (1997).
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Chakrabarty J (1987) Theory of plasticity. McGraw-Hill, New York
Chen WF (1975) Limit analysis and soil plasticity. Elsevier, Amsterdam
Chen WF (1988) Concrete Plasticity: Past, present and future. In: Yu MH, Fan SC (eds.) Strength Theory: Applications, Developments and Prospects for the 21st Century, Science Press, Beijing, New York, 7–48
Chen WF, Saleeb AF (1981) Constitutive equations for engineering materials. Vol.1, Elasticity and Modelling; Vol.2, Plasticity and Modelling. Wiley, New York
Ghorashi M (1994) Limit analysis of circular plates subjected to arbitrary rotational symmetric loading. Int. J. Mech. Sci., 36(2):87–94
Hodge PG Jr (1959) Plastic analysis of structures. McGraw-Hill, New York
Hodge PG Jr (1963) Limit analysis of rotationally symmetric plates and shells. Prentice-Hall, New Jersey
Hopkins HG, Prager W (1953) The load carrying capacities of circular plates. J. Mech. Phys. Solids, 2:1–13
Hopkins HG, Prager W (1954) On the dynamic of plastic circular plates. Z. Angew. Math. Phys., 5:317–330
Hopkins HG, Wang AJ (1954) Load carrying capacities for circular plates of perfectly-plastic material with arbitrary yield condition. J. Mech. Phys. Solids, 3:117–129
Hu LW (1960) Design of circular plates based on plastic limit load. J. Eng. Mech., ASCE, 86(1):91–115
Ma GW, Hao H, Iwasaki S (1999) Plastic limit analysis of a clamped circular plate with unified yield criterion. Structural Engineering and Mechanics, 7(5):513–525
Ma GW, Hao H, Iwasaki S (1999) Unified plastic limit analysis of circular plates under arbitrary load. J. Appl. Mech., ASME, 66(6):568–570
Ma GW, He LN (1994) Unified solution to plastic limit of simply supported circular plate. Mechanics and Practice, 16(6):46–48 (in Chinese, English abstract)
Ma GW, He LN, Yu MH (1993) Unified solution of plastic limit of circular plate under portion uniform loading. The Scientific and Technical Report of Xi’an Jiaotong University, 1993–181 (in Chinese)
Ma GW, Iwasaki S, Miyamoto Y, Deto H (1999) Dynamic plastic behavior of circular plate using unified yield criterion. Int. J. Solids Struct., 36(3):3257–3275
Ma GW, Yu MH, Iwasaki S, et al. (1994) Plastic analysis of circular plate on the basis of the Twin shear unified yield criterion. In: Lee PKK, Tham LG, Cheung YK (eds.) Proceedings of International Conference on Computational Methods in Structural and Geotechnical Engineering. China Translation and Printing Ltd., Hong Kong, 3:930–935.
Ma GW, Yu MH, Iwasaki S, Miyamoto Y (1995) Unified elasto-plastic solution to rotating disc and cylinder. J. Structural Engineering (Japan), 41A:79–85
Ma GW, Yu MH, Miyamoto Y, et al. (1995) Unified plastic limit solution to circular plate under portion uniform load. J. Structural Engineering (in English, JSCE), 41A:385–392
Mroz Z, Sawczuk A (1960) The load carrying capacity of annular plates. Bulletin of Science Akademia of SSSR, Moscow, 3:72–78 (in Russian)
Save MA (1985) Limit analysis of plates and shells: Research over two decades. J. Struct. Mech., 13:343–370
Save MA, Massonnet CE (1972) Plastic analysis and design of plates, shells and disks. North-Holland Publ. Co., Amsterdam
Save MA, Massonnet CE, Saxce G de (1997) Plastic limit analysis of plates, shells and disks. Elsevier, Amsterdam
Wang AJ, Hopkins HG (1954) On the plastic deformation of built-in circular plates under impulsive load. J. Mech. Phys. Solids, 3:22–37
Wang F (1988) Nonlinear finite analysis of RC plate and shell using unified strength theory. Ph. D. Thesis, Nanyang Technological University, Singapore
Wang YB, Yu MH (2003a) Unified plastic limit analysis of simply supported circular plates with strength differential effect in tension and compression. Chinese J. Applied Mechanics, 20(1):144–148
Wang YB, Yu MH (2003b) Plastic limit analysis of simply supported circular plates with different tensile and compressive strength under linear distributed load. China Civil Engineering Journal, 36(8):31–36 (in Chinese, English abstract)
Wang YB, Yu MH, Li JC, et al. (2002) Unified plastic limit analysis of metal circular plates subjected to border uniformly distributed loading. J. Mech. Strength, 24:305–307 (in Chinese, English abstract)
Wang YB, Yu MH, Wei XY (2002) Unified plastic limit analyses of circular plates under uniform annular load. Engineering Mechanics, 19(1):84–88 (in Chinese, English abstract)
Wei XY, Yu MH (2001) Unified plastic limit of clamped circular plate with strength differential effect in tension and compression. Chinese Quart. Mechanics, 22(1):78–83 (in Chinese)
Yu MH (1992) A new system of strength theory. Xi’an Jiaotong University Press, Xi’an (in Chinese)
Yu MH (2002) Advance in strength theory of materials under complex stress state in 20th century. Applied Mechanics Reviews, ASME, 55(3):169–218
Yu MH (2004) Unified Strength Theory and Its Applications. Springer, Berlin
Yu MH, He LN (1991) A new model and theory on yield and failure of materials under complex stress state. In: Mechanical Behavior of Materials-6, Pergamon Press, Oxford, 3:841–846
Zyczkowski M (1981) Combined Loadings in the Theory of Plasticity. Polish Scientific Publishers, PWN and Nijhoff
Rights and permissions
Copyright information
© 2009 Zhejiang University Press, Hangzhou and Springer-Verlag GmbH Berlin
About this chapter
Cite this chapter
(2009). Plastic Limit Analysis for Simply Supported Circular Plates. In: Structural Plasticity. Advanced Topics in Science and Technology in China. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-88152-0_5
Download citation
DOI: https://doi.org/10.1007/978-3-540-88152-0_5
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-88151-3
Online ISBN: 978-3-540-88152-0
eBook Packages: EngineeringEngineering (R0)