Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Ambrósio JAC (2002) Impact of rigid and flexible multibody systems: deformation description and contact models. Virtual nonlinear multibody systems, NATO Advanced Study Institute, Prague, Czech Republic, June 23–July 3, edited by W Schiehlen and M Valásek, Vol. II, pp. 15–33.
Baker GJ, Gollub JP (1990) Chaotic dynamics—an introduction. Cambridge University Press, Cambridge, United Kingdom.
Bauchau OA, Rodriguez J (2002) Modelling of joints with clearance in flexible multibody systems. International Journal of Solids and Structures 39:41–63.
Bengisu MT, Hidayetoglu T, Akay A (1986) A theoretical and experimental investigation of contact loss in the clearances of a four-bar mechanism. Journal of Mechanisms, Transmissions, and Automation in Design 108:237–244.
Dubowsky S (1974) On predicting the dynamic effects of clearances in planar mechanisms. Journal of Engineering for Industry, Series B 96(1):317–323.
Dubowsky S, Freudenstein F (1971a) Dynamic analysis of mechanical systems with clearances, part 1: formulation of dynamic model. Journal of Engineering for Industry, Series B 93(1):305–309.
Dubowsky S, Freudenstein F (1971b) Dynamic analysis of mechanical systems with clearances, part 2: dynamic response. Journal of Engineering for Industry, Series B 93(1):310–316.
Earles SWE, Wu CLS (1975) Predicting the occurrence of contact loss and impact at the bearing from a zero-clearance analysis. Proceedings of IFToMM fourth world congress on the theory of machines and mechanisms, Newcastle Upon Tyne, England, pp. 1013–1018.
Farahanchi F, Shaw, SW (1994) Chaotic and periodic dynamics of a slider crank mechanism with slider clearance. Journal of Sound and Vibration 177(3):307–324.
Flores P, Ambrósio J (2004) Revolute joints with clearance in multibody systems. Computers and Structures, Special Issue: Computational Mechanics in Portugal 82(17–18):1359–1369.
Flores P, Ambrósio J, Claro JCP, Lankarani HM, Koshy CS (2006) A study on dynamics of mechanical systems including joints with clearance and lubrication. Mechanism and Machine Theory 41(3):247–261.
Hertz H (1896) On the contact of solids—on the contact of rigid elastic solids and on hardness. Miscellaneous papers (Translated by DE Jones and GA Schott), pp. 146–183. Macmillan, London, England.
Lankarani HM (1988) Canonical equations of motion and estimation of parameters in the analysis of impact problems. Ph.D. Dissertation, University of Arizona, Tucson, AZ.
Lankarani HM, Nikravesh PE (1990) A contact force model with hysteresis damping for impact analysis of multibody systems. Journal of Mechanical Design 112:369–376.
Mansour WM, Townsend MA (1975) Impact spectra and intensities for high-speed mechanisms. Journal of Engineering for Industry, Series B 97(2):347–353.
Miedema B, Mansour WM (1976) Mechanical joints with clearance: a three mode model. Journal of Engineering for Industry 98(4):1319–1323.
Nikravesh PE (1988) Computer-aided analysis of mechanical systems. Prentice Hall, Englewood Cliffs, NJ.
Ravn P (1998) A continuous analysis method for planar multibody systems with joint clearance. Multibody System Dynamics 2:1–24.
Schwab AL (2002) Dynamics of flexible multibody systems, small vibrations superimposed on a general rigid body motion. Ph.D. Dissertation, Delft University of Technology, Netherlands.
Shabana AA (1989) Dynamics of multibody systems. Wiley, New York.
Thümmel T, Funk K (1999) Multibody modelling of linkage mechanisms including friction, clearance and impact. Proceedings of tenth world congress on the theory of machine and mechanisms, Oulu University, Finland, Vol. 4, pp. 1375–1386.
Timoshenko SP, Goodier JN (1970) Theory of elasticity. McGraw-Hill, New York.
Tomsen JJ (1997) Vibrations and stability—order and chaos, McGraw-Hill, New York.
Townsend MA, Mansour WM (1975) A pendulating model for mechanisms with clearances in the revolutes. Journal of Engineering for Industry, Series B 97(2):354–358.
Wiggins S (1990) Introduction to applied nonlinear dynamical systems and chaos. Springer Berlin Heidelberg New York.
Wilson R, Fawcett JN (1974) Dynamics of slider–crank mechanism with clearance in the sliding bearing. Mechanism and Machine Theory 9:61–80.
Wu CLS, Earles SWE (1977) A determination of contact-loss at a bearing of a linkage mechanism. Journal of Engineering for Industry, Series B 99(2):375–380.
Zukas JA, Nicholas T, Greszczuk LB, Curran DR (1982) Impact dynamics. Wiley, New York.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Flores, P., Ambrósio, J., Claro, J.P., Lankarani, H.M. (2008). Planar Joints with Clearance: Dry Contact Models. In: Kinematics and Dynamics of Multibody Systems with Imperfect Joints. Lecture Notes in Applied and Computational Mechanics, vol 34. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-74361-3_4
Download citation
DOI: https://doi.org/10.1007/978-3-540-74361-3_4
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-74359-0
Online ISBN: 978-3-540-74361-3
eBook Packages: EngineeringEngineering (R0)