Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Ahmed S, Lankarani HM, Pereira MFOS (1999) Frictional impact analysis in open loop multibody mechanical system. Journal of Mechanical Design 121:119–127.
Ambrósio J (2000) Rigid and flexible multibody dynamics tools for the simulation of systems subjected to contact and impact conditions. European Journal of Solids A/Solids 19:S23–S44.
Ambrósio J (2002) Impact of rigid and flexible multibody systems: deformation description and contact models. Virtual nonlinear multibody systems, NATO Advanced Study Institute, Prague, Czech Republic, June 23–July 3, edited by W Schiehlen and M Valásek, Vol. II, pp. 15–33.
Bagci C (1975) Dynamic motion analysis of plane mechanisms with Coulomb and viscous damping via the joint force analysis. Journal of Engineering for Industry, Series B 97(2):551–560.
Baumgarte J (1972) Stabilization of constraints and integrals of motion in dynamical systems. Computer Methods in Applied Mechanics and Engineering 1:1–16.
Bottasso CL, Citelli P, Taldo A, Franchi CG (1999) Unilateral contact modeling with adams. International ADAMS user’s conference, Berlin, Germany, November 17–18, 11pp.
Brach RM (1991) Mechanical impact dynamics, rigid body collisions. Wiley, New York.
Dietl P (1997) Damping and stiffness characteristics of rolling element bearings—theory and experiment. Ph.D. Dissertation, Technical University of Vienna, Austria.
Dubowsky S (1974) On predicting the dynamic effects of clearances in planar mechanisms. Journal of Engineering for Industry, Series B 96(1):317–323.
Dubowsky S, Freudenstein F (1971) Dynamic analysis of mechanical systems with clearances, part: 1 formulation of dynamic model. Journal of Engineering for Industry, Series B 93(1):305–309.
ESDU 78035 Tribology Series (1978) Contact phenomena. I: stresses, deflections and contact dimensions for normally loaded unlubricated elastic components. Engineering Sciences Data Unit, London, England.
Flores P, Ambrósio J, Claro JCP, Lankarani HM (2006) Influence of the contact-impact force model on the dynamic response of multibody systems. Proceedings of the Institution of Mechanical Engineers, Part-K Journal of Multi-body Dynamics 220:21–34.
Gear CW (1981) Numerical solution of differential-algebraic equations. IEEE Transactions on Circuit Theory CT-18:89–95.
Goldsmith W (1960) Impact—the theory and physical behaviour of colliding solids. Edward Arnold, London, England.
Greenwood DT (1965) Principles of dynamics. Prentice Hall, Englewood Cliffs, NJ.
Han I, Gilmore BJ (1993) Multi body impact motion with friction analysis, simulation, and validation. Journal of Mechanical Design 115:412–422.
Haug EJ, Wu SC, Yang SM (1986) Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition deletion—I theory. Mechanism and Machine Theory 21(5):401–406.
Hertz H (1896) On the contact of solids—on the contact of rigid elastic solids and on hardness. Miscellaneous papers (Translated by DE Jones and GA Schott), pp. 146–183. Macmillan, London, England.
Hunt KH, Crossley FR (1975) Coefficient of restitution interpreted as damping in vibroimpact. Journal of Applied Mechanics 7:440–445.
Keller JB (1986) Impact with friction. Journal of Applied Mechanics 53:1–4.
Khulief YA, Shabana AA (1986) Dynamic analysis of constrained system of rigid and flexible bodies with intermittent motion. Journal of Mechanisms, Transmissions, and Automation in Design 108:38–45.
Lankarani HM (1988) Canonical equations of motion and estimation of parameters in the analysis of impact problems. Ph.D. Dissertation, University of Arizona, Tucson, AZ.
Lankarani HM (2000) A poisson based formulation for frictional impact analysis of multibody mechanical systems with open or closed kinematic chains. Journal of Mechanical Design 115:489–497.
Lankarani HM, Nikravesh PE (1990) A contact force model with hysteresis damping for impact analysis of multibody systems. Journal of Mechanical Design 112:369–376.
Lankarani HM, Nikravesh PE (1994) Continuous contact force models for impact analysis in multibody systems. Nonlinear Dynamics 5:193–207.
Love AEH (1944) A treatise on the mathematical theory of elasticity, Fourth edition. Dover Publications, New York.
Maw N, Barber JR, Fawcett JN (1976) The oblique impact of elastic spheres. Wear 38:101–114.
Nikravesh PE (1988) Computer-aided analysis of mechanical systems. Prentice Hall, Englewood Cliffs, NJ.
PC-Crash (2002) A simulation program for vehicle accidents, Technical manual, Version 6.2.
Pedersen S, Hansen J, Ambrósio J (2002) A novel roller-chain drive model using multibody dynamics analysis tools. Virtual nonlinear multibody systems, NATO Advanced Study Institute, Prague, Czech Republic, June 23–July 3, edited by W Schiehlen and M. Valásek, Vol. II, pp. 180–185.
Pedersen SL (2001) Chain vibrations. MS Dissertation, Department of Mechanical Engineering, Solid Mechanics, Technical University of Denmark, Lyngby, Denmark.
Pfeiffer F, Glocker C (1996) Multibody dynamics with unilateral constraints. Wiley, New York.
Ravn P (1998) A continuous analysis method for planar multibody systems with joint clearance. Multibody System Dynamics 2:1–24.
Rooney GT, Deravi P (1982) Coulomb friction in mechanism sliding joints. Mechanism and Machine Theory 17:207–211.
Ryan RR (1990) ADAMS—multibody system analysis software. Multibody systems handbook. Springer, Berlin Heidelberg New York.
Shampine L, Gordon M (1975) Computer solution of ordinary differential equations: the initial value problem. Freeman, San Francisco, CA.
Shivaswamy S (1997) Modeling contact forces and energy dissipation during impact in multibody mechanical systems. Ph.D. Dissertation, Wichita State University, Wichita, KS.
Silva MPT, Ambrósio J (2004) Human motion analysis using multibody dynamics and optimization tools. Technical report IDMEC/CPM—2004/001, Instituto Superior Técnico of the Technical University of Lisbon, Lisbon, Portugal.
Smith RC, Haug EJ (1990) DADS—dynamic analysis and design system. Multibody systems handbook. Springer, Berlin Heidelberg New York.
Stolarski TA (1990) Tribology in machine design. Butterworth-Heinemann, Oxford, England.
Threlfall DC (1978) The inclusion of Coulomb friction in mechanisms programs with particular reference to DRAM. Mechanism and Machine Theory 13:475–483.
Timoshenko SP, Goodier JN (1970) Theory of elasticity. McGraw-Hill, New York.
Wang Y, Manson M (1992) Two dimensional rigid-body collisions with friction. Journal of Applied Mechanics 59:635–642.
Wilson R, Fawcett JN (1974) Dynamics of slider–crank mechanism with clearance in the sliding bearing. Mechanism and Machine Theory 9:61–80.
Wu SC, Yang SM, Haug EJ (1986a) Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition deletion—II planar systems. Mechanism and Machine Theory 21(5):407–416.
Wu SC, Yang SM, Haug EJ (1986b) Dynamics of mechanical systems with Coulomb friction, stiction, impact and constraint addition deletion—III spatial systems. Mechanism and Machine Theory 21(5):417–425.
Zhu SH, Zwiebel S, Bernhardt G (1999) A theoretical formula for calculating damping in the impact of two bodies in a multibody system. Proceedings of the Institution of Mechanical Engineers 213(C3):211–216.
Zukas JA, Nicholas T, Greszczuk LB, Curran DR (1982) Impact dynamics. Wiley, New York.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Flores, P., Ambrósio, J., Claro, J.P., Lankarani, H.M. (2008). Contact-Impact Force Models for Mechanical Systems. In: Kinematics and Dynamics of Multibody Systems with Imperfect Joints. Lecture Notes in Applied and Computational Mechanics, vol 34. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-74361-3_3
Download citation
DOI: https://doi.org/10.1007/978-3-540-74361-3_3
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-74359-0
Online ISBN: 978-3-540-74361-3
eBook Packages: EngineeringEngineering (R0)