Abstract
A set of objects of interest is to be sequentially inspected by a Micro Aerial Vehicle (MAV) equipped with a camera. Upon arriving at an object of interest, an image of the object is sent to a human operator, who, upon inspecting the image, sends his feedback to the MAV. The feedback from the operator may consist of the pose angle of the object and whether he has seen any distinguishing features of the object. Upon receiving the feedback, the MAV uses this information to decide whether it should perform a secondary inspection of the object of interest or continue to the next object. A secondary inspection has a reward (or value or information gain) that is dependent on the operator’s feedback. There is an associated cost of reinspection and it depends on the delay of the operator’s feedback. It seems reasonable to let the MAV loiter for a while near the most recently inspected object of interest so that it expends a small amount of endurance from the reserve after receiving the feedback from the operator. The objective is to increase the information and hence, the total expected reward about the set of objects of interest. Since the endurance of the MAVs is limited, the loiter time near each object of interest must be carefully determined. This paper addresses the determination of the optimal loiter time through the use of Stochastic dynamic programming. Numerical results are presented that show the optimal loiter time is a function of the maximum expected operator delay.
The views expressed in this article are those of the authors and do not reflect the official policy or position of the United States Air Force, Department of Defence, or U.S. Government.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
- Unmanned Aerial Vehicle
- Optimal Decision
- Operator Delay
- Stochastic Dynamic Program
- Stochastic Optimal Control Problem
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Gross, D., Rasmussen, S., Chandler, P.R., Feitshans, G.: Cooperative Operations in UrbaN TERrain (COUNTER). In: 2006 SPIE Defense & Security Symposium, Orlando, FL, 17-21 April (2006)
Derman, C., Lieberman, G.J., Ross, S.M.: A Sequential Stochastic Assignment Problem. Management Science (Theory Series) 18(7), 349–355 (1972)
Ross, S.: Introduction to Stochastic Dynamic Programming. Academic Press, London (1982)
Pachter, M., Chandler, P.R., Darbha, S.: Optimal Control of an ATR Module Equipped MAV–Human Operator Team. To appear in: Lecture Notes in Economics and Mathematical Systems, vol. 588. Springer, Heidelberg (2007)
Girard, A.R., Pachter, M., Chandler, P.: Decision Making Under Uncertainty and Human Operator Model for Small UAV Operations. In: Proceedings of the AIAA Guidance, Navigation and Control Conference, Keystone, CO (August 2006)
Pachter, M., Chandler, P.R., Darbha, S.: Optimal Sequential Inspections. In: Proceedings of the IEEE Conference on Decision and Control, December 2006, IEEE Computer Society Press, Los Alamitos (2006)
Pachter, M., Chandler, P.R., Darbha, S.: Robust Control of Unmanned Aerial Vehicles in Uncertain Environments. To appear in: International Journal of Robust and Nonlinear Control (2007)
Gallager, R.J.: Information Theory and Reliable Communication, p. 18. Wiley, Chichester (1968)
Parzen, E.: Modern Probability Theory and its Applications. Wiley, Chichester (1960)
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 2007 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Pachter, M., Darbha, S., Chandler, P. (2007). Sequential Inspection Using Loitering. In: Pardalos, P.M., Murphey, R., Grundel, D., Hirsch, M.J. (eds) Advances in Cooperative Control and Optimization. Lecture Notes in Control and Information Sciences, vol 369. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-74356-9_17
Download citation
DOI: https://doi.org/10.1007/978-3-540-74356-9_17
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-74354-5
Online ISBN: 978-3-540-74356-9
eBook Packages: EngineeringEngineering (R0)