Abstract
The design and implementation of the four-rotor aerial mobile robot called quadrotor is described in this paper. The beginning is focused on the mechanical construction of the robot body and the hardware implementation of the main control board. The next part describes the simplified mathematical model of the quadrotor. On the base of the created model, a state space controller was designed and implemented. As a result, every quadrotor axis is controlled independently as in the case of the use of separated PI or PD controllers. The last part of the paper deals with a software solution. This can be divided into three parts: the first part describes the application for the onboard microcontroller, the second part focuses on the solution of the base station. The special part of software which solves the localization of the quadrotor using a camera is described at the end of the article.
Access provided by Autonomous University of Puebla. Download to read the full chapter text
Chapter PDF
Similar content being viewed by others
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
References
Gurdan, D., Stumpf, J., Achtelik, M., Doth, K.-M., Hirzinger, G., Rus, D.: Energy-efficient Autonomous Four-rotor Flying Robot Controlled at 1 kHz. In: 2007 IEEE International Conference on Robotics and Automation (2007)
Silhan, M.: Odhad orientace UAV v prostoru. Diploma thesis - Czech Technical University in Prague, Faculty of Electrical Engineering (2010)
Solc, F.: Modelling and Control of a Quadrocopter. Advances in Military Technology 5(2), 29–38 (2010)
Zalud, L., Florian, T., Kopecny, L., Burian, F.: Cassandra - Heterogeneous Reconnaissance Robotic System for Dangerous Environments. In: Proceedings of 2011 IEEE/ SICE International Symposium on System Integration, pp. 1–6 (2011)
Sharp, C.S., Shakernia, O., Sastry, S.S.: A vision system for landing an unmanned aerial vehicle. In: IEEE International Conference Proceedings ICRA 2001, vol. 2, p. 1720 (2001)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Gabrlik, P., Kriz, V., Vomocil, J., Zalud, L. (2015). The Design and Implementation of Quadrotor UAV. In: Sinčák, P., Hartono, P., Virčíková, M., Vaščák, J., Jakša, R. (eds) Emergent Trends in Robotics and Intelligent Systems. Advances in Intelligent Systems and Computing, vol 316. Springer, Cham. https://doi.org/10.1007/978-3-319-10783-7_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-10783-7_5
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-10782-0
Online ISBN: 978-3-319-10783-7
eBook Packages: EngineeringEngineering (R0)